1.System Features - 4 channel audio input,1 channel audio output - Connects up to 4/8/16 Video Camera Adjustable Brightness, Contrast, Saturation, Hue and Sharpness - High Resolution 720X480 60Hz for NTSC 720X576 50Hz for PAL - Various Display Modes 4 /8/16 Split Mode Full Screen Mode PIP Screen Mode Realtime 8 Split Mode...
2.Rear Panel Installation 16 Split system Camera Connection Accept 16 loop composite video inputs from the camera. Monitor Connection Provide 1 composite video output for the main monitor. VCR OUT Connection Provide 1 composite video output for recording in the VCR. VCR IN Connection Accept 1 composite video input for playback from the VCR.
3.Front Key Operation 16 Split system front panel Note: (*L) – Press key continuously more than one second to enter menu options. (**S) – Press key less than one second to enter menu options. ⑴ MENU (*L) : Enter or Exit main menu mode. AUDIO (**S) : switch audio channel or turn off audio AUTO (*L) : Auto channel switch ON/OFF...
/ FULL : Channel 7 ( channel 15) display ⒂ 7/15 / FULL : Channel 8 ( channel 16) display ⒃ 8/16 4. Function description 4.1 Button MENU / AUDIO ● MENU: Press the MENU (*L) button to enter or exit menu setup.
● M4-B: Press the M4-B (**S) button to switch channel for PTZ in opening PTZ function. ● M4-A: Press the M4-A (**S) button to display slaver QUAD. ● ▼: Press the ▼ (**S) to move cursor in menu setup. Button M8/◄ ●...
Page 10
⑶ Press the M4-B (**S) button to switch channel for PTZ controlling when the ptz controlling is effective ⑷ The control key definition (as follows): ◄:stop; 8/16 FULL:automatic pattern ► : right ; 1/9 FULL : left ; (direction 2/10 FULL:down 3/11 FULL:up;...
5. Setup Menu Operation The system provides a built-in GUI setup screen. For each menu, the key function is described in the lower region to help operation. The following figure shows the structure of GUI menu. 9 / 19...
5.1 Setup Main menu: Press MENU (*L) key to enter main menu setup. Move cursor to the item of needed setup with ▲/▼.Press ◄/► to select the value. Press ENTER key to enter submenu. Press MENU (**S) key to exit last menu. Press MENU (*L) to exit main menu setup.
Page 13
FACTORY RESET: comeback to factory setup. Press ◄/► to select YES or NO. If select NO, press ENTER to enter into next dialog box. Press ◄/► to select YES and press ENTER to comeback factory setup. Default:NO Factory Reset Menu FACTORY RESET WARNING! THIS SYSTEM GETS TO LOSE...
5.3 Display Setup Menu DISPLAY SETUP DISPLAY ON SCREEN ☑ TITLE ☑ DATE ☑ TIME SCREEN POSITION X : 0 Y : 0 BORDER LINE COLOR BLACK GRAY1 GRAY2 WHITE SELECT ADJUST EXIT DISPLAY ON SCREEN : Select YES or NO to display camera title, data time in the screen.
5.4 Camera Setup Menu CAMERA SETUP CAMERA : 01 TITLE : CAMERA01 BRIGHTNESS : 0 CONTRAST SATURATION : 0 SHARPNESS : 0 MIRRORING : OFF SELECT ADJUST EXIT Setup each camera’s title / brightness /contrast / saturation / hue / sharpness and mirroring independently.
5.6 Event Setup Menu Setup loss detection independently of channels. BUZZER/REKPORT : Control buzzer and relay in alarm, video loss and motion states. Press ▲/▼/◄/► to select item o and press ENTER to change state. “√” is ON. Default: VIDEO LOSS: NO (√). BUZZER HOLD TIME :...
5.7 Event Report EVENT REPORT 1 OF 6 PAGE YY-MM-DD HH:MM:SS EVENT 07-07-30 16:56:03 LOSS 07-07-30 16:56:03 LOSS 07-07-30 16:56:03 LOSS 07-07-30 16:56:03 LOSS 07-07-30 17:56:03 LOSS 07-07-30 17:56:03 LOSS 07-07-30 17:56:03 LOSS 07-07-30 17:56:03 LOSS 07-07-30 18:56:03 LOSS 07-07-30 18:56:03 LOSS LIST CLEAR : NO...
Page 19
LIS T C L EA R WAR NI NG! THI S S YS TEM G ETS T O L OS E THE CU RR ENT E VEN T LIS T AND WI LL BE I NIT IA LIZ ED WIT H B LI NK. A RE YO U SUR E? YE S SE L ECT...
6. RS-232C and RS485 Interface Connection as follow The Explanation of connection as follow: Ground must be connected into together : The 5th foot of the serial port connect to the 1th foot of the RS485/RS232 connection . The 3th foot of the serial port connect to the 3th foot of the RS485/RS232 connection .
Page 21
RS-232 function Introduction The RS232 is used for remote control of the machine, baud rate is 9600bps .Meanwhile, the system ID works to provide the range of values which can be modified: 0x01~0XFF. Through the system ID we can operate the machine. How-to, first sent the ID, and then the following stated commands are sent.