Table of Contents
Advertisement
3.2 Power on.
Please verify the polarity of the power supply and connections before power on the unit.
After connect the power supply, there are different ways to power on the monitor:
1. Connect the VGA to any VGA source.
2. Connect the Rear camera input to a CVBS source.
3. Press the power on button
4. Adjusting
4.1 Keyboard.
1. Increase Volume/OSD Parameter.
2. Source switching.
3. Decrease Volume/OSD Parameter.
4. Dimmer.
5. Power on key.
6. Show OSD window.
7. Power on Indicator/LED.
until the monitor power on.
XF800 OPERATION MANUAL
Page 4
Advertisement
Table of Contents
