Specification; Troubleshooting - Wharfedale Pro 15”/19” HD Ready LCD TV User Manual

Table of Contents

Advertisement

sPECIFICAtIOn

specifications of the television that you have just purchased may vary from the
information in this table due to technical innovations.
Model
picture, sound
system
Audio output
External input
port
power
requirements
power
consumption
Temperature
Humidity
Accessories
nOtE
All specifications are subject to change without notice.
All qualities are approximate values.
20
WHARFEDALE | HD Ready LCD TV | User Manual | Customer helpline: 0845 604 0105
L1511W-A L1911W-A
PAL/SECAM-B/G,D/K,I,L/L'
≥1.5W+1.5W
COMPONENT input, PC input, S-VIDEO input, Audio input,
Headphone output, SCART, Antenna input, HDMI input
~150-240V 50/60Hz
≤50W
≤60W
Working: 5°C – 35°C
Storage: -15°C – 45°C
Working: 20% – 80%
Storage: 5% – 90%
Remote control
Batteries
Owner's manual
Audio cable

tROuBLEsHOOtIng

To assist in locating possible faults, use the help guide below.
problem
how to solve the problem
Check the television has been properly plugged in.
No picture,
Check the television has a proper supplied power source.
no sound
Check electricity is available.
Check the signal inputs.
press the SOURCE button to change signal input to
Blank screen
TV input.
Restart the television if power supply is interrupted.
press the MUTE button and see if Mute mode is set.
switch to another channel and see if the same problem
No sound
occurs.
press the VOL+ button to see if the problem can be solved.
Check if the sound system is correct. Refer to the user
poor sound
guide to adjust.
Check if the correct channel is selected.
No picture in
Adjust the antenna.
some channels
Make adjustments by FINE TUNE and MANUAL SEARCH.
No colour for
Check if the same problem exists in other channels.
some channels
Check out the picture and sound systems.
(black & white)
Refer to the user guide for colour adjustment.
Check if the antenna is correctly connected.
spots with some
Check if the antenna is in good condition.
or all pictures
Make fine adjustment of channel.
Disconnect the television from the power supply and
10 seconds later, re-connect the television to the
Television out
power supply.
of control
if the problem still exists, contact authorised after-sales
service for technical assistance.
nOtE
1 if the fault cannot be repaired using the above guide, consult your local
authorised service centre.
2 The TV set must only be repaired by a qualified registered service person.
Never attempt to remove the back cover as the TV set has dangerous
voltages inside that may cause a fatality or fire.
WHARFEDALE | HD Ready LCD TV | User Manual | Customer helpline: 0845 604 0105
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents