Olive Nexus V-R9 User Manual page 38

Advanced Setup > Advanced Setting > SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol
designed to give user, the capability to remotely manage a computer
network by polling and setting terminal values and monitoring network
events.
Enable SNMP
You must check either Local or Remote or both to enable SNMP
function. If Local is checked, this device will have response
request from LAN. If Remote is checked, this device will have
response request from WAN.
Get Community
Setting the community of Get Request your device will respond.
Set Community
Setting the community of Set Request your device will accept.
IP 1,IP 2,IP 3,IP 4
Input your SNMP Management PC's IP here. User has to configure
that where, this device should send SNMP Trap message.
SNMP Version
Please select proper SNMP Version that your SNMP
Management software supports.
WAN Access IP Address
If the user wants to limit that only specific IP address to be accessed,
38