Please read this user manual carefully, and check every instruction and operation requirements. - Make sure the installation, operation, transportation, warehouse inventory and others are made by the qualified mount guard staffs; - Observe whether there is damage of the products in transportation, please immediately contact with your suppliers, DON NOT use in electricity.
2. Interface Instruction 2.1. Main Interface The 3 top right buttons are used for language switching and screen rotation. The corresponding interface instruction of the 4 bottom buttons is as below. 2.2. Setting Interface Option Instruction Operation Slave state:Receive the DMX signal from controller or the Mode host one Auto...
XY coder Use the coder(optocoupler) to judge whether out of step, and correct position automatically Don’t use the coder( optocoupler ) to correct position Retai According to the original state to continue running signal Reset Motors return, stop running Screen No operation for 30 seconds, the backlight will be off protection The backlight will be on all the time...
to select the unit editing. Click again exit editing state. Lamp control 2.5. Advanced Interface The password is "up and down up and down". Operation process is: press the "Up" key (appear first "*"), click again "Down" key (appear the second "*"), then press the "Up" key (appear third "*"), click again "Down"...
Page 6
TILT FINE TILT FINE FUNCTION (UNUSED) FUNCTION (UNUSED) RESET RESET LAMP CONTROL LAMP CONTROL PAN-TILT TIME COLOUR TIME DIMMER-PRISM-FROST TIME GOBO TIME COLOUR WHEEL - channel 1 EFFECT Remark FAST ROTATION …… …… SLOW ROTATION BLUE + WHITE In order to facilitate the memory, color value is always a multiple of BLUE CTB 8000 + BLUE...
Page 7
AQUAMARINE + GREEN AQUAMARINE ORANGE + AQUAMARINE ORANGE RED + ORANGE WHITE + RED WHITE STOP/STOBE - channel 2 EFFECT Remark 252-255 OPEN Controlled by dimmer channel 239-251 RANDOM FAST STROBE 226-238 RANDOM MEDIUM STROBE 213-225 RANDOM SLOW STROBE 208-212 OPEN Controlled by dimmer channel FAST PULSATION...
Page 8
…… …… corresponding to a gobo GOBO 17 SHAKE, SLOW SPEED GOBO 16 SHAKE, FAST SPEED …… …… GOBO 16 SHAKE, SLOW SPEED …… …… GOBO 2 SHAKE, FAST SPEED …… …… GOBO 2 SHAKE, SLOW SPEED GOBO 1 SHAKE, FAST SPEED ……...
Page 10
LAMP CONTROL- channel 16 EFFECT Remark 101-255 LAMP ON Stay seconds corresponding area, then 10-100 LAMP OFF begin to switch the lamp. UNUSED RANGE TIMING CHANNELS Timing Channel function Remark Channel Pan-Tilt time Pan-Tilt-(Pan SLOW SPEED fine-Tilt fine) ……...