TruAudio RM-15Sub User Manual

Red Mountain Subwoofers
By TruAudio
Powered subwoofers
RM-15Sub, RM-12Sub and RM-10Sub

Introduction

TruAudio is proud to launch our first 100% USA built subwoofer in St. George UT.
Since 1997, TruAudio has been designing and engineering some of the finest
loudspeakers available. Because we came from the installation industry, each of our
products is designed to adapt to the specific installation environment. Obviously, with
our architectural products it's a lot easier to make a speaker "disappear" but even our
freestanding speakers look great and easily blend into the room's décor.
The Red Mountain powered subwoofers are some of the finest available today. It took
over two years to design a speaker system that offers the best video sound reproduction
in either 5.1, 6.1 7.1 and even 9.1.
Model RM-12Sub, RM-10Sub
These powered subwoofers in this series leaves nothing to be desired. After over 1 year
of engineering and testing, the RM-12Sub and RM-10Sub are the last link needed to
complete the TruAudio theater package. These subwoofers use a black anodized
Aluminum woofer and a slot port design. All those fancy words really mean a specially
designed woofer that will provide tons of bass at high volumes for extended periods of
time. This is all driven by a huge, super powerful, A/B power amplifier build
exclusively for this cabinet and driver array. The RM-12Sub features a 300 watt amp
and the RM-10Sub features a 250 watt.
All models are timbre matched to each other, as well as other TruAudio architectural
speakers so combining different models in an AV system will not be a problem.
Additional TruAudio speakers can be added to a system with the confidence that the
speakers will remain balanced.