Datacom NextG 007GTi PRO Instruction Manual page 34

Device Password ID – This indicates the method or indentifies password that the selected Registrar
intends to use. AP in PBC mode must indicate 0x0004 within two minutes.
Value
0x0000
0x0001
0x0002
0x0003
0x0004
0x0005
0x0006-0x000F
Selected Registrar – This indicates if the user has recently activated a Registrar to add an Enrollee. The
values are "TRUE" and "FALSE".
State – The current configuration state on AP. The values are "Un-configured" and "Configured".
Version – WPS specified version.
AP Setup Locked – This indicate if the AP has entered a setup locked state.
UUID-E – The universally unique identifier (UUID) element generated by the Enrollee, a 16 bytes value.
RF Bands – This indicates all RF bands available on the AP. A dual-band AP must provide it. The values
are "2.4GHz" and "5GHz".
************
© 2015 by danets Datacom Network Ltd. All rights reserved.
NextG 007GTi PRO USB-Yagi Instruction Manual
Description
Default (PIN)
User-specified
Rekey
Display
Push Button (PBC)
Registrar-specified
Reserved
DN-WLAN-035 Page 34