Download Print this page

JTS AWA-75 Pro User Manual page 5

Jts awa-75 pro uhf pll wireless portable active speaker

Advertisement

AWA-75
PRO
21
MTX-16
7
6
5
.
4
200
150
100
50
11
12
10
8
9
.
.
AUX./GUITAR
.
.
16
AC POWER
ON
OFF
CAUTION:
To reduce the risk electrical shock, do not remove the
cover(or back). No user serviceable parts inside; refer
servicing to quali ed personnel.
FLASH: CHARGING
RED
WARNING:
To reduce the risk of re or electrical shock, do not expose
LIGHT: FULL
FLASH: LOW VOLTAGE
this appliance to rain or moisture.
GREEN
LIGHT: NORMAL VOLTAGE
17
18
25
20
-
+
DC FUSE
DC 24-28V
8A/250V
AC FUSE : T2AL/250V
EXT. DC IN
AC INPUT
19
06
24
POWER
/PEAK
0dB
21
-20dB
MIN
MAX
CH
VOL.
UHF Transmitter Module
3
2
1
14
13
23
22
15
SWITCH
ONLY for Wireless Microphone
AWA-75 BACK PANEL
Volume and Effect Control
1. Master volume control: for all sound except AUX input/output
2. Bass tone control: for all sound except AUX input/output
3. Treble tone control: for all sound except AUX input/output
Echo Function
4. Echo ON/OFF:
5. Echo volume control:
6. Echo time delay control: for MIC1/MIC2 and wireless module
7. Echo repeat control: for MIC1/MIC2 and wireless module
Wired Microphone Control
8. MIC1 input (φ6.3 phone jack): with independent volume control and echo effect
9. MIC2 input (φ6.3 phone jack): with independent volume control and echo effect
10. MIC1 volume control: for MIC1 input
11. MIC2 volume control: for MIC2 input
AUX Function
12. AUX volume control: for Guitar and AUX input & output
13. Guitar input:
14. AUX input & output: with RCA jack
Power & Battery Function
15. Main Power Switch
16. AC Power Switch:Only when AC Power switch is in "ON", the external AC power will connect to
the system.
17. 3P type AC power socket: whatever power switch is in "ON" or not, as soon as AC power is
connected, and AC power switch is in "ON", it will charge the batteries.
Charger Indicator Status
Red and Flashing: Charging
Red and Light: Full
Green and Flashing: Low Voltage
Green and Light: Normal Voltage
Notice:
Normally charging would take between 6 to 8 hours to be full charged
18. External 24V battery input: Outside DC input would not charge the batteries.
19. AC Fuse:T2AL/250V for AC input
20. DC Fuse: 8A/250V for DC input
Wireless Module and Control
21. Wireless module: with independent volume control and echo effect
22. Wireless Microphone priority switch: Switching to "ON", all other sound source will
be eliminated as soon as wireless microphone begins being used.
CD Player Module and Extended Speaker
23. CD player module: with independent power switch
24. Cassette Player (Optional for AWA-75 Pro)
25. Extended speaker terminal (φ6.3 phone jack): suggested using 8Ω external speaker
since it will be parallelly connected with internal speaker.
07

Advertisement

loading