Advertisement
Quick Links
COMMERCIAL GAS GRIDDLES
MODEL NOS.
BG 12 BG 36
BG 24 BG 48
CONTENTS:
• GAS DATA
• GENERAL SPECIFICATIONS
• UNPACKING AND INSPECTION
• INSTALLATION
• GRIDDLE PREPARATION
• OPERATION
• MAINTENANCE
• ADJUSTMENTS
• PARTS LIST
1. 18 gauge aluminized steel unibody construction.
2. 18 gauge stainless steel splash guards. TIG welded to griddle plate for leakproof operation.
3. Heavy Duty .18 gauge aluminized steel burner box construction.
4. Each linear 12 inches of griddle surface has a high efficiency tubular "U" burner for even
temperature distribution.
5. 5/8" thick machine polished griddle plate.
6. 1 gallon capacity grease drawer with baffle.
7. Supplied with adjustable NSF listed legs.
8. A.G.A. design certified.
9. MEA Listed.
10. NSF Listed.
DO NOT store or use gasoline or other flammable vapors and liquids in the
This installation must conform with local codes, with the National Fuel Gas Code, ANSI
Z223.1 (latest edition), Natural Gas Installation Code, CAN/CGA - B149.1, or the Propane
WARNING: Improper installation, adjustment, alteration, service or maintenance can
result in property damage, injury or death. Read the installation, operating and
maintenance instructions thoroughly before installing or servicing this equipment.
Cecilware sells value... Worldwide.
43-05 20th Avenue, Long Island City, NY 11105
HEAVY DUTY
STANDARD FEATURES:
FOR YOUR SAFETY
vicinity of this or any other appliance.
Installation Code, CAN/CGA - B149.2 as applicable.
OPERATION MANUAL
• 718-932-1414
FAX: • 718-932-7860
N788A 5/99
Advertisement
Related Manuals for Cecilware BG 12
Summary of Contents for Cecilware BG 12
-
Page 1: Standard Features
HEAVY DUTY COMMERCIAL GAS GRIDDLES MODEL NOS. OPERATION MANUAL BG 12 BG 36 BG 24 BG 48 CONTENTS: • GAS DATA • GENERAL SPECIFICATIONS • UNPACKING AND INSPECTION • INSTALLATION • GRIDDLE PREPARATION • OPERATION • MAINTENANCE • ADJUSTMENTS • PARTS LIST STANDARD FEATURES: 1. - Page 2 FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. SAFETY PRECAUTIONS FOR YOUR SAFETY. THE FOLLOWING PRECAUTIONS SHOULD BE FOLLOWED AND ENFORCED. Instructions must be posted in a prominent location and all safety precautions taken in the event the user smells gas. Obtain this information form you r local gas supplier.
- Page 3 FOR QUALIFIED SERVICE PERSONS ONLY INSTALLATION INSTRUCTION UNPACKING AND INSPECTION: Cut the two plastic straps around shipping container and lift off top of container exposing griddle. Remove boards and bottom of shipping container. Install the legs, shipped with griddle in a separate plastic envelope. To install legs, tilt back and screw in two front legs.
- Page 4 OPERATION OF GRIDDLE: By turning all the burners to the fully on position, the griddle plate will preheat to about 350°F in 10 minutes. The burners should be turned down to an idling position (low flame) when not cooking; otherwise the griddle plate will overheat which may result in discoloration and warping.
- Page 5 PARTS LIST FIG # ITEM BG 12 BG24 BG36 BG48 Griddle Plate Ass'y S213Q S214Q S215Q S216Q Heat Shield T680A T665A T690A T700A Gas Burner Right Side G236A G236A G236A Gas Burner Left Side G237A G237A G237A G237A Gas Orifice Hood (N)