Subscribe to Our Youtube Channel
Summary of Contents for PCI VoIP Gateway
- Page 1 VoIP Gateway Hardware Installation Guide The VoIP Gateway Hardware Installation Guide Edition 2.0 Page 1/1 DOC No.: 9172000302...
-
Page 2: Table Of Contents
VoIP Gateway Hardware Installation Guide Table of Contents OVERVIEW ..............................3 ............................3 EATURES ...........................5 ANEL UTLOOKS 1.2.1 Front Panels............................5 1.2.2 Rear Panels............................7 LAN I ...........................8 NTERFACES 1.3.1 QoS Configuration..........................8 1.3.2 Cascading Devices..........................9 ..........................10 ONNECTORS 1.4.1 Voice Ports............................10 1.4.2 Console Port............................11 1.4.3 CDR Port .............................11... -
Page 3: Overview
VoIP Gateway Hardware Installation Guide 1 Overview The VoIP gateway is utilizing the VoIP technology that provides varies application for all kind of legacy PBX. With only one IP connection, the PBX can have multiple access with any heterogeneous PBX. - Page 4 Machine Connect to analog phones Features of 7-inch Desktop Models There are two models for desktop type VoIP gateway. One is two-ports and the other is four-ports. Two 10/100T Ethernet LAN connection that provide QoS capability to improve the voice quality and stackable scalability.
-
Page 5: Panel Outlooks
7-inch size desktop models are designed for small port density or portable usage. 1.2.1 Front Panels On the front panels of VoIP gateway, there are two Ethernet Ports, RS-232 Console ports and status LEDs. If Call Detail Record is provided, it has extra CDR (Call Detail Record) port. - Page 6 VoIP Gateway Hardware Installation Guide 19-inch models Fig 4 Front Panel of 19-inch 16 ports model Fig 5 Front Panel of 19-inch 8 ports model MP3008 Fig 6 MP3008 Module Front Panel MP3004 Fig 7 MP3004 Module Front Panel MP3108...
-
Page 7: Rear Panels
VoIP Gateway Hardware Installation Guide 1.2.2 Rear Panels All the voice interfaces connectors are located at the rear panel for 12-inch and desktop 7-inch models. And also the DC power-in jack is located on the rear panel too. There is a press button at the rear panel for all VoIP gateways. It is for special maintenance purpose does not press it in normal usage. -
Page 8: Lan Interfaces
VoIP Gateway Hardware Installation Guide 12 inch 4 ports model Fig 12 Rear Panel for 4 ports 12-inch model 19-inch models Fig 13 19-inch models Rear Panels 1.3 LAN Interfaces The two Ethernet Ports on PBX voice gateway have different priorities. The "To WAN"... -
Page 9: Cascading Devices
VoIP Gateway Hardware Installation Guide Since Ethernet is under CSMA/CD mechanism, to provide the QoS for voice packet over Ethernet interface, it is need to place the voice gateway as near to the router as possible. With internal hardware QoS facility, the voice packets will have higher priority than data from local area network. -
Page 10: Connectors
VoIP Gateway Hardware Installation Guide 1.4 Connectors 1.4.1 Voice Ports WARNING: Before plugging the connectors into the FXS interfaces on PBX voice gateway do check if the lines that are going to plug into do not have any power source ("0" voltage). -
Page 11: Console Port
VoIP Gateway Hardware Installation Guide Dealing with RJ-11 connectors On those models which equip with RJ-11 connectors. Use tools to fix the RJ-11 jack on the wire that you are going to plug into the device Dealing with IDC connectors... -
Page 12: Physical
VoIP Gateway Hardware Installation Guide 1.4.4 Physical 12-inch models Dimension: 278mm width x 44 mm height x 202 mm depth Weight: 2.4kg (Net) 7-inch desktop models Dimension: 172 mm width x 35 mm height x 176 mm depth Weight: 900g (Net) -
Page 13: Led
VoIP Gateway Hardware Installation Guide 1.4.5 LED 12-Inch models Label Description 10/100 LNK/ACT When lit, indicates a network connection. Ethernet The LED will flash when network traffic is detected. 100Mbps Indicating the network is running at 100Mbps Port LOOP/ When lit, indicates a loop has been... - Page 14 VoIP Gateway Hardware Installation Guide READY When lit, indicates that this device is has joint into the group, otherwise, it will be dark. For Master devices, it will always lit 19-inch models Label Description 10/100 LNK/ACT When lit, indicates a network connection.
-
Page 15: Locating Device
VoIP Gateway Hardware Installation Guide 2 Locating Device The PBX voice gateways are able to locate on 19" Rack, on the Wall or put on desk. For different locating installation, please choose the proper bracket for mounting. Model Installation Part Number... -
Page 16: Wall Mounting
VoIP Gateway Hardware Installation Guide 2.1.2 Wall Mounting 12-inch models 19-inch models For wall-mounting, please be sure to have the FAN toward the upper side, for the heat in the device will be easier to blow out from FAN with its side toward to the upper side. -
Page 17: Desktop Mounting
VoIP Gateway Hardware Installation Guide 2.1.3 Desktop Mounting To put the device on the desk, it is better to stick on the rubber feet at the bottom of the device to prevent the device slip away and also protecting the device from scratching. -
Page 18: Life-Line Application(Only With Mp3208)
MP3208 connect to the analog trunk ports of PBX When power fail on VoIP gateway, the first port of FXS will be the last port of FXO on MP3208. Thus, there is one to one port mapping of FXS with FXO ports on MP3208 module when power fail. - Page 19 VoIP Gateway Hardware Installation Guide Lifeline Fig 19 Lifeline support on 7-inch 1 FXS 1 FXO model Lifeline Fig 20 Lifeline support on 7-inch 2 FXS 2 FXO model 2.1.4.3 Using MP3208 to save the extra Trunk card of PBX Using MP3208 has another advantage that you can use your current analog trunk card without add another new analog trunk card for PBX voice gateway.
-
Page 20: Safety Information
VoIP Gateway Hardware Installation Guide 3 Safety Information WARNING: Before plugging the connectors into the FXS interfaces on PBX voice gateway do check if the lines that are going to plug into do not have any power source ("0" voltage). -
Page 21: Installation
VoIP Gateway Hardware Installation Guide 4 Installation Step 1. Powering up Step 2. Connecting to Router Step 3. Connecting to LAN Step 4. Connecting the voice channels Step 5. Connecting the Console Port Step 6. Look at the software installation guide to start configuring the device Page 21/21 DOC No.: 9172000302... -
Page 22: Cable Pinouts
VoIP Gateway Hardware Installation Guide 5 Cable Pinouts The Pinouts for 10/100BaseT MDI Port Table 5-1 10/100BaseT MDI Port Pinouts 8 Pin Description Fig 21 Pin numbers of RJ-45 Connector PIN 1 PIN 8 The Pinouts for 10/100BaseT MDI-X Port... - Page 23 VoIP Gateway Hardware Installation Guide The Pinouts for RJ-11 Port Table 5-5 RJ-11 Voice Port Pinouts 4 Pin Description No used Ring No Used The Pinouts for Null Modem Cable Used on Console Interface (DB-9 female with DB-9 female) Fig 22 Pin assignments for Null Modem Cable...
- Page 24 VoIP Gateway Hardware Installation Guide The Pinouts for Null Modem Cable Used on Console Interface (DB-9 with RJ-45) Fig 23 Pin assignments for Null Modem Cable (DB-9 with RJ-45) Table 5-7 The Pinouts for Null Modem Cable Used on Console Interface(DB-9 with RJ-45)
Need help?
Do you have a question about the VoIP Gateway and is the answer not in the manual?
Questions and answers