Agp Configuration - Asus SK8N User Manual

4.4.2.3
The Chipset menu item allow you to change the AGP settings. Select an
item then press Enter to display the sub-menu.
AGP Chipset Configuration
AGP Overclock in MHz
Aperture Size
AGP 1.5V Voltage
AGP FW Enable
AGP SideBand Address
Primary Video
AGP Overclock in MHz [ 66]
This item sets the AGP Frequency ranged from 66 to 75 (MHz). Any value
that is not within this range will have no effect. Unsupported values many
cause the system to become unstable.
Aperture Size [128 MB]
This item sets the Aperture size for the AGP Video controller, it does not
consume real system memory.
Configuration options: [32 MB] [64 MB] [128 MB] [256 MB] [512 MB]
AGP 1.5V Voltage
This item sets the AGP voltage setting.
Configuration options: [1.5V] [1.6V] [1.7V]
AGP FW Enable [Disabled]
This item enables or disables the AGP FW Enable.
Configuration options: [Disabled] [Enabled]
AGP SideBand Address [Disabled]
This item enables or disables the AGP SideBand address.
Configuration options: [Disabled] Enabled]
4-20

AGP Configuration

[66]
[ 128 MB]
[ 1.5V]
[Disabled]
[Disabled]
[PCI]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS Setup