1. Manuals
  2. Brands
  3. Proctor Manuals
  4. DVR
  5. PRT 7004
  6. User manual

Proctor PRT 7004 User Manual

Standalone
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DVR
Standalone
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRT 7004 and is the answer not in the manual?

Questions and answers

Summary of Contents for Proctor PRT 7004

  • Page 1 Standalone USER MANUAL...

  • Page 2: Table Of Contents

    Content s Content s Security Systems Chapter 1 Service Requirement Chapter 2 Product Infor matio n Chapter 3 Basic Pr od uct Operation Power on/of f System Login Scree n display MODE(Screen setup) Digit al Zoo m Recording Searc h Playback Backu p SPOT...
  • Page 3 Chapter 7 CMS – EMAP Editor/Viewer Chapter 8 CMS – Remote Update Chapter 9 Web CMS Chap ter 10 Mobile acce ss MISC Chap ter 11 Chap ter 12 Specification Chap ter 13 Warranty Standalone DVR Page: User Manual V er .

  • Page 4: Chapter 1 Service Requirement

    Chapter 1 Service Requirement Limitation of warranty We warrant that Standalone DVR series will be free from defects in materials and workmanship under normal use and service for all parts excluding hard drives for a period of one year after the date that the customer purchased the product.

  • Page 5: Product Information

    Chapter 2 Product Information Features Enable integrated video monitoring and system management by networking with maximum 1000DVRs systems through CAMS(Central Automated Monitoring System) interface. High quality video display and system stability through embedded operating system with hardware H.264 video compression chip. Support the max D1(720*480) quality resolution video display and 480FPS recording.
  • Page 6 Firmware upgrade using network and USB port. Remote upgrade using CMS Free alarm (max 30secs), port alarm (max 120secs) recording Watermarking Private backup viewer E-Map’s layout mapping able to install maximum 4 HDDs or 1 ODD and 3HDDs(80XX series only) User friendly interface by USB mouse control Standalone DVR Page:...

  • Page 7: Basic Product Operation

    Chapter 3 Basic Product Operation Standalone DVR User Manual Ver. 2.2...
  • Page 8 FRONT CASE Button Description FRONT CASE Button Description PRT 3004 / 3008 / 3016 Remote control infrared receiver Display network connections(CMS, WebCMS) Record USB(Mouse) Power REAR PANEL I/O Description REAR PANEL I/O Description PRT 3004 (4 Channels) Audio IN Power adapter connecting jacks Video IN LAN(ETHERNET)
  • Page 9 REAR PANEL I/O Description REAR PANEL I/O Description PRT 3008 (8 Channels) Audio IN Power adapter Connecting jacks Video IN LAN(ETHERNET) Audio OUT Firmware upgrade USB back up Video OUT RS-485 Alarm/Sensor VGA(Monitor) REAR PANEL I/O Description REAR PANEL I/O Description PRT 3016 (16 Channels) Audio IN Power adapter...
  • Page 10 FRONT CASE BUTTON Description FRONT CASE BUTTON Description PRT 7004(4ch) Menu button Setup/Record/Search/Backup/OSD Move button Move to setup & /Operate PTZ camera Mode button LED Indicator Indicate present system status information Indicate present system status information Rec. button Number buttons...
  • Page 11 FRONT CASE BUTTON Description FRONT CASE BUTTON Description PRT 7008(8ch) Menu button Setup/Record/Search/Backup/OSD Move button Move to setup & /Operate PTZ camera Mode button LED Indicator Indicate present system status information Indicate present system status information Rec. button Number buttons Records images USB Port: 2 PORT...
  • Page 12 FRONT CASE BUTTON Description FRONT CASE BUTTON Description PRT 7016(16ch) Menu button Setup/Record/Search/Backup/OSD Move button Move to setup & /Operate PTZ camera Mode button LED Indicator Indicate present system status information Indicate present system status information Rec. button Number buttons Records images USB Port: 2 PORT...
  • Page 13 FRONT CASE BUTTON Description FRONT CASE BUTTON Description PRT 9004 (4ch) 1 division(full screen) / 4 division / LED Indicator PTZ. button / Move button/ ENTER Indicate present system status information Operate Pan/Tilt camera Move to menu & setup button/Operate PTZ camera Rec.
  • Page 14 FRONT CASE BUTTON Description FRONT CASE BUTTON Description PRT 9008 (8ch) SEQ. button Function button PTZ/SPOT/Audio/Backup/Log view Division rotating surveillance button Zoom button Menu button Setup/Record/Search/Backup/OSD LED Indicator PTZ. button Move button Indicate present system status information Operate Pan/Tilt camera Move to setup &...
  • Page 15 FRONT CASE BUTTON Description FRONT CASE BUTTON Description PRT 9016 (16ch) SEQ. button Function button Division rotating surveillance button PTZ/SPOT/Audio/Backup/Log view Zoom button Menu button Setup/Record/Search/Backup/OSD LED Indicator PTZ. button Move button Indicate present system status information Operates Pan/Tilt camera Moves to setup &...
  • Page 16 Remote Controller Button Description Remote Controller Button Description 1) Rec/Stop button 2) DIV-ID button Records/stop images Set DVR-ID 3) Numeric buttons Applies setup details and select channel 4) Audio button Generates audio through speaker 7) Z/F button Operates Zoom/Focus camera 5) Menu button Shows the menu.

  • Page 17: Power On/Off

    Power on/off Power on Press the power button at the back to be ‘ ON’ to turn it on after connecting the power cable. * If you use this model with adapter, there is no power switch. Power off ① press ‘ Menu’ button [ menu sy stem shutdown] ②...

  • Page 18: Screen Display

    Screen display Channel number : Playback in progress Camera name : Pause : Recording : Playback per frame : Play backward per frame : Motion detection in process : Speed playback : Speed play backward : Sensor detection in process : Double speed playback : Channel sequence indication : Double speed play backward...

  • Page 19: Mode(Screen Setup)

    MODE(Screen setup) CLIC K right Mouse button(Only for 8 ch/1 6 ch product) Full screen mode press this button. shifts to nex t channel each time you press this button. Q uad screen mode press this button. shifts to the nex t channel each time you press this button. - If you press a channel number button on remote- controller while being displayed in the current q uad screen, the selected channel turns full screen.
  • Page 20 9 division screen mode press this button 16 division screen mode press this button POP screen mode * only for 8Ch & 16Ch products - press ‘ POP’ button, it will display a certain channel larger than other channels. OSD mode - press ‘...
  • Page 21 PIP screen mode You can monitor 2 screens at the same time with small screen inside of one screen. (1) press ‘PIP’ button on the remote control. (2) press ‘PIP’ button one more time the display channels will be exchanged. ‘PIP’...
  • Page 22 SPOT screen (This function is only for 8008 and 8016 DVR) Display real time screen of another screen- mode in different monitor using ‘ SPOT OUT’ port at the back of product. Press ‘ Function’ button and select ‘ Spot’ to set up ‘ SPOT’ screen. (1 ) type ①...

  • Page 23: Digit Al Zoo M

    Dig ital z oom press (ZOOM) button in full screen mode to active digital z oom. z oomed area moves as you press arrow buttons. siz e of z oomed area gets bigger and smaller as you press (ZOOM ) button one more time. press ‘...

  • Page 24: Search

    Search press ‘ SEARCH’ button. Then y ou can see the ‘ Search’ menu lik e below. Search by time (1 ) input the date and time to search. Press ‘ ENTER/OK ’ button. Search by calendar (1 ) you can see ‘ calendar’ menu like below if you select ‘ Search by calendar ’ . (2) select the date and time using arrow keys.

  • Page 25: Playback

    Go to first playback from the beginning part of recorded. Go to last playback from the recent part of recorded. How to view ‘Covert-on (Hidden)’ channel 0000 Select ‘SHOW HIDDEN CH’. Click this icon, Or ‘Search’ button at the front panel. Or ‘Search’...

  • Page 26: Backu P

    Backup data protection with virtual password backup data using USB Memory stick. There are two ways to backup. A. How to back up the original data for all or some channels . Backup file can be run as a backup viewer in this way. To back up, you should input a back up password.
  • Page 27 Note : If 20XX model, Data backup must be used USB memory stick and back panel’s USB port. 1) You can backup a hidden channel while logged in as an Admin. 2) If logged in as a general User, hidden channels cannot be backed up. Standalone DVR Page: User Manual Ver.
  • Page 28 •NOTE: Do not remove USB device during Backup!. • Checking backup file size Note: If back up size is small, you cannot view progress rate. 2) File storage display 3) Copy files progress 4) Back up complete Standalone DVR Page: User Manual Ver.
  • Page 29 Back up viewer (1 ) Open file: Load the backup data. (2) AVI: save the selected channel to avi during playback Select channel click this icon(start) click again(finish) (3 ) Save : save the playback images as bmp file. (4 ) Print screen image (5) W atermark : check if there is any modification of data.
  • Page 30 Open file (1) Click ‘Open file’ button from the main screen. (2) Select files to playback. (3) Input backup password backup password (4) After it completes to load the backup file, you can playback it, and save it as bmp files. NOTE: 1) Both Admin and user can backup the data with this function.
  • Page 31 Audio playback (1) Load files with audio data. (2) Select and playback the channel, which audio is saved, it playbacks audio data at the same time. Save (1) Save backup data. (2) Select screen division. (3) Click ‘save’ button. (4) Name the ‘Bmp’ file and save. Image of saved bmp file as 9 division screen Standalone DVR Page:...
  • Page 32 W atermark ( 1 ) Load files to check watermarking (2) Click ‘ watermark check’ button. (3 ) Click playback or speed playback button. ( 4 ) It shows the image with error message if there is any modification of data. It shows ‘...

  • Page 33: Ptz

    PTZ(FUNCTION) PTZ operation Press button to display in full screen and you can operate PTZ cameras. Press ‘ ENTER/OK ’ button in PTZ mode, you will see ‘ PTZ- ADVANC’ menu. PTZ g eneral movement (1 ) Moves pan/tilt camera from up/ down and right/ left using arrow keys. (2) Enlarge or reduce the screen siz e by Z- /Z+ buttons while using z oom camera.

  • Page 34: Spot

    SPOT(FUNCTION) SPOT Operation(SPOT function onl y supports for 8008/8016 ) Select “ SPOT” after clicking “ FUNCTION” on DVR system . COVERT -ON SCREEN SPOT OUT DISPLAY COVERT-ON NO IMAGE IS SHOW N Note: Refer to pag e 30 in ‘ User Manual’ to select Spot out channels. * Screen display setup –...

  • Page 35: Audio

    Audio(FUNCTION) Turn on/ off audio. Y ou can only playback audio in full screen mode. ON : Turn on audio MUTE : Turn off audio Log View(FUNCTION) search the system event log. event type – select types of event to search from –...

  • Page 36: Remot E-Cont Rol Id

    Remote – controller ID Remote-controller ID (1 ) can use to operate several DVRs at one site with one remote- controller. (2) can operate a certain DVR according to the registered ID value. DVR ID DVR ID DVR ID It will turn yellow if remote controller ’ s ID matches with DVR ID. Then you can operate the DVR. It will turn red if remote controller’...

  • Page 37: System Setup

    Chapter 4 System setup Standalone DVR Page: User Manual Ver. 2.2...
  • Page 38 Before setting up sy stem Starting sy stem menu (1 ) press ‘ Menu’ button. (2) input administrator’ s password in password box . * Menu ty pe may vary different according to model. NOTE: default value: 0000 NOTE: default value: 0000 Menu format DISPLAY CAMERA...
  • Page 39 Saving/Canceling menu setup saving menu setup : select ‘ENTER/OK’’ button. canceling menu setup : select ‘Cancel’’ or ‘Menu’ buttons. Text input box (1) select letters/symbols using arrow buttons. (2) press ‘ENTER/OK’ button to select the letter/symbol. (3) the selected letters/symbols will show on the top text box. (4) click “CAP”...

  • Page 40: Display

    Setting up screen display Screen display setup – On Screen Display Camera name – Display each channel of camera name. Camera number – Display channel number. Camera border – Display each channel’s border. Language – Choose menu language. OSD HIDE – Turn on or off on OSD screen. - ALL: All display - STATUS BAR: status bar can be hidden after a certain time.
  • Page 41 Screen display setup – live seq uence scanning (sing le screen) Setup duration time for live seq uence scanning in full screen. NOTE : can input max imum 99 second. NOTE : can input max imum 99 second. Screen display setup – live seq uence scanning (q uad screen) Setup duration time for live seq uence scanning in q uad screen.
  • Page 42 Screen display setup – spot seq uence scanning (full screen) This function does not apply to some models. Setup duration time for spot seq uence scanning in full screen. NOTE : can input max imum 99 second. NOTE : can input max imum 99 second. Screen display setup –...
  • Page 43 Screen display setup – miscellaneous Deinterlace prevent screen twittering during playback of image which is recorded in low frame rate and 720X480 or 720X576 resolution. VGA frequency setup the frequency of connected VGA monitor. - 800 * 600 - 1024 * 768 - 1280 * 1024 Standalone DVR Page:...

  • Page 44: Camera

    Camera Setup Camera setup – general title – input channel names. COVERT on/off – show or hide channels. audio – select connected audio channels. Camera set up – PRIVATE ZONE Zone set up – Censor the selected Cell z one. Clear all –...
  • Page 45 Camera setup – PTZ ID – input camera IDs. protocol – select the registered protocol. baud – select the registered baud. The supported protocol type’s DVR - PELCO-D - PELCO-P - SCC641 - SK2161 - CNB102 - ADTECH - 15-CD51M - COP1 - COP2 - DSC230...
  • Page 46 Camera setup – preset NOTE : sy stem will record according to preset positions of camera. NOTE : sy stem will record according to preset positions of camera. chec k if camera supports preset function before setting up. chec k if camera supports preset function before setting up. can setup 64 preset positions for each channel.
  • Page 47 Camera setup – TOUR NOTE : you can move camera to follow the path by saved preset positions for each channel. Y ou can set 4 NOTE : you can move camera to follow the path by saved preset positions for each channel. Y ou can set 4 scan point list for each channel.
  • Page 48 Camera setup – COLOUR camera – select a camera. bright – adjust color brightness. contrast – adjust color contrast. color – adjust camera color default value – set it as default value. Camera setup – position camera – select a camera right/left –...

  • Page 49: Record

    Record setup Record setup – Property resolution – set recording resolution for each channel. 720 x 480 720 x 576 720 x 240 720 x 288 352 x 240 352 x 288 q uality – set recording q uality for each channel. Basic Small Normal...
  • Page 50 Record setup – schedule system records according to set schedule. see below to see how to set up schedule. Continuous recording Recording when even occurred C(continue)+E(event) (Blank) Not recording (1) Select a channel to set up schedule. (2) Select day/time to record and press ‘ENTER/OK’ button. (3) it shifts to different type as you press ‘ENTER/OK’...
  • Page 51 Record setup – miscellaneous overwrite – erase previous video data and record over it when HDD is full. auto delete – automatically delete data after set date. continuous record – you cannot stop recording while it is in process as it continuously records. watermark –...

  • Page 52: Event

    Event setup NOTE : you have to set it as ‘ Even recording’ at ‘ Schedule record setup’ to use this function. NOTE : you have to set it as ‘ Even recording’ at ‘ Schedule record setup’ to use this function. W hen the event (sensor/motion/video loss) is detected on DVR side, DVR alerts by message pop- up, beep sound or E- mail notification.
  • Page 53 Event setup - sensor Record – select camera to record on sensor detection. Type – select sensor type. Alarm out – activate alarm out on sensor detection. If you choose ‘multi’ in the previous record menu, you can record all channel or specific channel.
  • Page 54 Event set up – VLOSS ALARM-OUT – Select Alarm port. NONE: Alarm port does not output. PORT 1: Beep occurs to the specified Alarm port. Multi : Beep occurs to the selected Alarm port. (Some models do not apply.) •Note: 1) Alarm output port can be specified by the overlap.
  • Page 55 Event setup – E-MAIL EVENT E-MAIL(OFF/ALL_TIME/Schedule)): Choose an e-mail sending function. If you select ‘schedule’, you can receive e-mail which is desired day/time as setting ‘E-MAIL SCHEDULE’. Choose EVENT TYPE - MOTION(ON/OFF): When motion is detected, you can notice by e-mail. - POWER ON : When power is on or booting, you can notice by e-mail.
  • Page 56 EX. E-mail notification you would receive. [Example for received email] Event setup – E-MAIL SCHEDULE You can set up schedule for 24 hours a week. This schedule setting is for received e-mail from Saturday to Sunday at 8:00pm~6:00am. You can notice event happening by an e-mail while you don’t work. Standalone DVR Page: User Manual Ver.
  • Page 57 Event setup – ALARM SCHEDULE You can set up schedule for 24 hours a week. This setting is for alarm from Friday to Monday at 09:00am-5:59pm. You can recognize any events by alarm during working. Standalone DVR Page: User Manual Ver. 2.2...
  • Page 58 Event setup – MISC pre-recording time – setup pre-recording time on the selected event detection. post-recording time –setup post-recording time on the selected event detection. ALARM buzzer – enable alarm buzzer on the selected event detection. alarm out time – setup duration to activate alarm out on the selected event detection. EVENT POPUP –...

  • Page 59: Storage

    Storage Storage – HDD format You must format HDD when you install HDD. All saved data will be removed after HDD format process! Storage – AUTO-BACKUP EXTEND: User can use EXTEND backup through connected USB external HDD. Data(which is need to be deleted) will be send to USB external HDD if Main HDD is full. MIRROR: User can use MIRROR backup through connected USB external HDD.
  • Page 60 STORAGE– HDD SMART You can check HDD’s temperature and if temperature is higher than setting , you can set the alarm. (1) HDD1, HDD2 : Inform the current temperature and displays for installed HDD. (2) SMART ON/OFF: If temperature is higher than setting, you can also set the alarm or not. (3) TEMPERATURE THRESHOLD: You can set up when SMART menu is ON.

  • Page 61: Network

    Network Network – setup static – Input static IP address and gateway, net mask. DHCP – System automatically recognizes IP address. Click “OK”, after selecting DHCP. You will have IP address. PPPOE – ADSL only, input registered ID and password. Standalone DVR Page: User Manual Ver.
  • Page 62 NETWORK– STREAM If CMS or web CMS access, Dual stream function offers in order to reduce the load on the network.(default rate is ON.) (1) DUAL STREAM - ON: Transmit to each channel’s setting value. - OFF: Transmit according to DVR Set’s recording setting value. (2) Resolution: You can choose 3 kinds of resolution.
  • Page 63 Network - DDNS NOTE : system supports free DDNS sites such as dyndns.com, ipupdater.com. NOTE : system supports free DDNS sites such as dyndns.com, ipupdater.com. SERVER – select registered server. SERVER- URL – indicate registered server URL USER ID – input ID registered to server. PASSW ORD –...

  • Page 64: Access List

    Access list System can limit remote- PC, accessing network. Able to register Static IP and only remote- PC with registered IP can access system. NOTE : the system restricts all the other IPs, those are not registered if you once register an IP. If you want NOTE : the system restricts all the other IPs, those are not registered if you once register an IP.
  • Page 65 Server CC IP – input connection info of CAMS CC. PORT – input connection port of CAMS CC. (default value: 6500) CMM IP – input connection info of CAMS CMM. PORT – input connection port of CAMS CMM. (default value:7600) Standalone DVR Page: User Manual Ver.

  • Page 66: System

    Sy stem Sy stem – Config uration info NOTE : you can save the set values for menu to USB storage. NOTE : you can save the set values for menu to USB storage. Load configuration – loads saved configuration information. Save configuration –...
  • Page 67 Sy stem – Time manag ement Current time – indicates current time of system. Date format – select date format to display. classification display YY/MM/DD 2008/03/03 MM/DD/YY 03/03/2008 DD/MM/YY 03/03/2008 Time format – select time format to display. classification display AM/PM 01:39:01 PM 24 HOURS...
  • Page 68 Time synchroniz ation W hen using TIME SY NC Function, please select “ SNTP” . And then, System can Automatically connects to internet time- server to check current time. Server IP – input time- server IP address. Omit ‘ www’ . Select ‘...
  • Page 69 System – USER/Password management ADMIN password – change the administrator password. NETUSER password – from network user password by CMS. USER password – change the USER and user password for CMS. SETUP check – set whether to input user password or not before accessing system menu. REC.F check –...
  • Page 70 System – System shutdown Select ‘’System shutdown’. If you see the message “system will shutdown”, you can shutdown system. Note: To protect your computer system, If you want to you turn off on your computer’s power, you must turn off after selecting shutdown on system menu. If you don not follow up, your computer can be damaged firmware or can be occurred a fatal error in the system.

  • Page 71: Firm Ware Upgrad E

    Chapter 5 Firmware Upgrade Standalone DVR Page: User Manual Ver. 2.2...
  • Page 72 NOTE : There are two ways to upgrade firmsare. ( 1 ) USB upgrade – upgrade system using USB memory stick. (2) NETW ORK upgrade – upgrade system by internet connection. USB up g rade (1 ) Copy the provided firmware file to USB memory stick. NOTE : The firmware file should be saved in route directory of the USB device.
  • Page 73 Networ k up g rade Network upg rade (1 ) Press ‘ Menu’ button and move to the nex t software. ‘ Menu’ button and move to the nex t software. [ Menu (2) Y ou will see a new box if you select ‘ Upgrade’ . (3 ) Select ‘...

  • Page 74: Cms - Display Mode

    C hap ter 6 C M S – D isp lay M o de Display Mode Setup Mode Search mode Standalone DVR Page: User Manual Ver. 2.2...

  • Page 75: User Interface

    User Interface search saved image by remote or local search. Search : Setup : setup on CMS system. Monitor DVR sites, Camera, Sensor, and Control through E- MAP. E-Map : can check or print ‘ Log file’ in the CMS system. Log Viewer : Log out : Log in/out Start : can e x ecute overall CMS functions such as log in/out, Setup, Search.

  • Page 76: Display Screen

    Display screen : It represents site code, screen number, and camera name. : “R” It represents this image is saving on CMS. : It represents this image is with audio data. : It represents the time of data transmitted. “10-12 16:30:14” DVR System time E-Map : Click this button to enable ‘E-MAP’.
  • Page 77 Full Screen Mode : Only normal main screen is available to apply full screen mode in CMS function. ▪ Normal Mode Full Screen Mode Double click right button of mouse on normal main screen. Enter ID and password and click “ OK ” . (Normal Mode) (Full Screen Mode) ▪...
  • Page 78 PTZ Controller: can control PTZ from the remote site of CMS via network. - Click ICON of PTZ as the left image. - Can control up , down, left & right direction of PTZ. - Can Zoom IN / OUT of PTZ. - Can control speed of Zoom IN &...
  • Page 79 - ScanPoint Setting: after selecting ScanPoint click SET Button. According to the order of the left image menu, select Preset number & dwell time. ScanPoint can be set up to 4 times per camera. ScanPoint Operation: Select ScanPoint at PTZ Main controller, input ScanPoint number on number, and then click RUN Button, can be operation for Scanpoint function.
  • Page 80 Connection list & Sensor/Control & Screen Division Connection list There are two ways which are Pre-Memorize and DVR list on the connection list. Pre-Memorize show the information for each DVR site on the list. Screen list: can change the position of camera after selecting screen or list. DVR list Monitor each screen in order without extra display setup.

  • Page 81: Screen Division

    Sensor/Control - Select the registered site name, then, click each button of sensor and control to activate. Screen Division - Various surveillance modes available through division buttons. Status Status List : It represents the event message of CMS program. Status List : Click the button to check the details of event messag e. Standalone DVR Page: User Manual Ver.
  • Page 82 Save Disk List : Select the drive to setup save disk for the data from each DVR site. Save Disk List : Free space of and the status of each drive can be check ed. 2W AY AUDIO : Audio communication between CMS and DVR available. Click ‘...
  • Page 83 E-Map : Monitor the position of DVR, Camera, Sensor, and Control through E-MAP. Log Viewer : Check ‘Log file’ in the CMS system by clicking the button. Logout : log in or out, shutdown, EMC Standby , cancel the program. Default User ID : administrator / Password : 1234 Default User ID : administrator / Password : 1234 Ask administrator or dealer if you forgot ID or PW.

  • Page 84: Cms - Setup Mode

    C M S – S etup M o de Display Mode Setup Mode Search mode Standalone DVR Page: User Manual Ver. 2.2...
  • Page 85 Setup USER : make the user group with different privilege. Default is ‘ ADMINISTRATOR’ . Reg istered user list : It represents the group of registered users. Reg ister new user : Register new user : click this button to add new user, and click ‘ Apply’ . Privileg e : you can assign different privilege to each user.
  • Page 86 DVR Setup : setup the network connection. Reg istered site list : It represents registered DVR LIST. IP address of my computer : It represents IP information of CMS System. DVR Info : Input the information of Network connection as DVR is registered.
  • Page 87 Delete : click it to remove the registered site. Edit site : edit setup information. Conn. Setting : it is for modem connection setup. You should setup Modem on OS, and this button will be enabled. Adjust the time for retrying connection. If there is no response from the site system, the system will retry connection as you set up.
  • Page 88 Show versions : shows the version of CMS currently using, click ‘Send site version’ to show the information of site version. DVR Info.: shows the information of connecting site, program version, time, capture card type, the number of sensor and control. Standalone DVR Page: User Manual Ver.
  • Page 89 Display DISPLAY : It represents CMS DISPLAY SCREEN and setup information on the LIST. Setup Pre-Memoriz e : Display list can be generated by clicking “ + ” and “ - ” after setup display. SCREEN Info : Select DVR name and camera after selecting Display List to monitor the appropriate image.
  • Page 90 SCHDULER DVR list : shows a list of registered DVR. Recording Schedule : setup save schedule for the selected DVR from the DVR Select DVR to save from DVR List. Drag or click to select the date/time to change the schedule. Click ‘R’...
  • Page 91 SAVE DISK Install drive(s) list: shows a drive list of CMS system. Save drive: shows the list of drives to DVR data, transmitted to CMS. Setting up ‘Local Drive’ 1) Select a drive to save data from ‘Installed drive(s) list’ 2) Click ‘Add Disk’...
  • Page 92 EMC (Emergency Management Center) EMC mode : when the emergency event happen on the site, the event image is sent to CMS system automatically with multiple or single screen. Enable EMC : checkmark to enable EMC. Select the event mode either by motion or by sensor or control.
  • Page 93 EMC single screen pop-up : automatically pop up with site name and camera number. Standalone DVR Page: User Manual Ver. 2.2...
  • Page 94 Setting up OTHERS Tool Tip : shows function ex planation if you put the mouse on the function key. Dig i-Clock display format : select display format of digital- clock. Motion Detection Setup: shows the motion detected area if the transmitted dada is motion Event. Restore : in case of system shutdown , changes in system setting value or other functions, you can restore the latest setting value.

  • Page 95: Remote Setup

    Remote Setup Camera Camera list : shows camera list installed on the site, and you can make the setup on the network. Select a camera to setup. Camera name : change the camera name, and adj ust color, brightness, contrast of the camera. Use Motion : select the full or part of motion area, and also control motion sensitivity.
  • Page 96 Record speed 1 ) Image siz e : select image siz e for recording. (EVENT REC / NORMAL REC) 2) Individual camera recording setup : select image siz e, q uality, frame rates for each camera. SCHEDULER 1 ) Recording schedule : select a date of a week, and setup recording schedule. Selected value will be shown in red mark.
  • Page 97 SENSOR Map sensors to cameras, and select the sensor type. SY STEM DVR info : shows the connected DVR information such as DVR name, program version. Network info : shows network connection information such as IP address, subnet mask, gateway. User info : shows user list of the connected DVR.
  • Page 98 LOG LIST LOG LIST : search for DVR event log. (System, H DD, Record , DB , Process, Network, Motion, Sensor, V- loss, Blind) Select data on the calendar. Select event type and click “ Search” button. Event search result will show up on log list window on the right side. Standalone DVR Page: User Manual Ver.

  • Page 99: Cms - Search Mode

    C M S – S ear c h M o de Display Mode Setup Mode Search mode Standalone DVR Page: User Manual Ver. 2.2...
  • Page 100 Search Mode Dig i Dig i clock clock Dig i-clock Calendar Calendar Calendar Play bac k Play bac k Play bac k Screen Screen Screen Sy stem Sy stem Sy stem Utility Utility Utility Screen Screen Screen Division Division Division Play back Play back Play back...
  • Page 101 Pla y bac k Screen C10(Camera 10) : ‘ C1 0 ’ is screen number, ‘ Camera1 0 ’ is the camera name of save data. x 1 : shows how many times the picture z oomed in. Move the mouse on a screen, and double click the right mouse button to select.

  • Page 102: Time Table

    Time table When you click ‘Search’ button, the system is loading the save data, and the data save location will be shown on the time table with different color of the event. Double click each cell to playback the data. Camera zone : displays all cameras installed on the system.
  • Page 103 Pla y back control buttons : - Move to the first imag e of the data. - Play back ward per frame. - Pla y bac k ward. - Stop to play back . - Play back - Pla y forward per frame. - Move to the last imag e of the data.
  • Page 104 Save : click to save the data as J PEG, AVI, price format. Data will be saved with viewer, so it will auto- run and you can view it on any PC without special program. Camera : select a camera. Save Audio data Time setting : setup the time of the data which you’...
  • Page 105 Special Search 1) Real Play er : Y ou can search the audio data. 2) Multi time Play er : you can playback the data on the multiple time z one on the same playback screen. 3) Day Search : you can search a day of data(0 0 : 0 0 ~ 23 : 59 ) per camera by hour, by minute. For ex ample, if you want to see the data by minute, select one screen of specific time by mouse double click, If y ou want to g o bac k to the previous step, click ‘...
  • Page 106 4) Object Search : you can quickly search movement or missing of an object on the specific zone. Select a camera to search and then click ‘scan button’. Drag to designate the area to search. Sensitivity : select the sensitivity from 0 to 24. Default is 13. SEC/MIN : select search by minute or by second.

  • Page 107: Remote Search

    Remote Search Remote Search : search the saved data on DVR sites. Dig i Dig i clock clock Dig i-clock Calendar Calendar Calendar Play bac k Play bac k Play bac k Screen Screen Screen Sy stem Sy stem Sy stem Utility Utility Utility...
  • Page 108 Recording event : Search by event. It playbacks only the selected event data if you checkmark ‘Event Mode’. Real-Time Play : playback ‘Audio’ and ‘Video data’ in real time.(PCDVR Only) Standalone DVR Page: User Manual Ver. 2.2...
  • Page 109 Remote Bac k up Remote Back up : User can backup data from local DVR remotely through remote backup button on CMS. ① ② Us DVR.(DVR s File name: ex ) 20110502_ 022000_ nCm.ps Data file for Y Y Y Y /MM/DD_ 02:20:00PM ③...
  • Page 110 C hap ter 7 E - M A P E dito r / V iew er • E - Map: EMAP using pictures or images can be monitored. * There are 2types like CMS Map and Site Map on the E – Map 1.
  • Page 111 2) E – Map should be saved to C: \ CMS_ 2K V3 \ emap. Basically, CMS E- Map (4 areas are registered as an ex ample.) Each of the internal file name is CMS.emp and SITE- 1 0 0 .emp. If there is no CMS.emp file or Site name and Site Map name does not match, W arning message will pop up as below.
  • Page 112 4) This picture shows when running Start → E – Map → Editor. To edit CMS map, if you use one of 4 images on CMS map, CMS Map image with CMS.emp will appear when you click the top right of the tab. 5) After selecting an unnecessary map, click Edit →...
  • Page 113 *File menu 6) Click the File tab of the main menu. File (There are 2 types image files format like Bitmap and JPEG to use to E – Map Editor.) NEW : Open new image file OPEN : Open old E – Map(*.emp) file or new image file SAVE : Save files SAVE AS : Save as another name CLOSE : E - Map and image file close...
  • Page 114 7 ) Arrange Site on CMS E- Map Editor, double click and then enter Site property. Please make sure that the Site name as above picture name and DVR setting info on CMS must be the same. SITE NAME must be the same with DVR name. if the name is different, CMS MAP can run but previously arranged Site icon will not appear so you cannot view the Site map.
  • Page 115 1) Click ‘File’-> NEW -> Choose BMP or JPG files for using to Site Map. 2) Imported files will be used Site Map, so Map Mode will change to SITE MAP at CMS MAP. (When Site button on the left is disable, the other button can use for editing. Standalone DVR Page: User Manual Ver.
  • Page 116 3) Arrange it by using a camera, control, sensor etc. After opening BMP files or JPEG file. 4) To change place or icon image, right click on arranged camera.. 5) If you click ‘SITE INFO’ button, you can add DVR site’s additional information. 6) User can be moved or deleted by dragging arranged the icon.
  • Page 117 Edit Edit Map Name: Edit the name of each map. ADD MAP: Add new EMAP files. COPY MAP: Copy current opening BMP files or EMAP files. PASTE MAP: Paste copied files. DELETE MAP: Delete current displayed map. DELETE OBJECT: Delete the selected icon. Select All Object: Select all icons on the map.
  • Page 118 Map Mode SITE MAP: Change Editor mode to SITE MAP. CMS MAP: Change Editor mode to CMS MAP. View CAMERA STATE: Can check camera information. CONTROL STATE: Can check control information. SENSOR STATE: Can check sensor information. About You can check E-Map Editor version. Standalone DVR Page: User Manual Ver.
  • Page 119 1) When you are finished to edit for CMS Map, Site Map, access the DVR Site -> Start → E – Map-> run. ※ If you want to use directly Site Map, click ‘DVR E – Map’. And then CMS Map viewer will run. If DVR Site registers , file will show on the top left of CMS category as pictured.

  • Page 120: Firmware Update

    Chapter 8 Remote Update CMS - Firmware Update - You can remote-update NS DVR programs, those are connected through network, using CMS. Check points before use 1) check if the version of NS DVR is later than ‘usb_ft_16-080311-01’. [consultation] you can check the version as follow; ‘NS DVR FRONT ‘FUNCTION’ KEY STATUS STATUS BOX’...
  • Page 121 5) Click ‘Browse’ button from ‘Firmware Upload’ window. 6) Search the file, provided from supplier or dealer. Click ‘Open’ button. 7) Click ‘Update’ button from ‘Firmware Upload’ window. Then it will start uploading the update file to the selected DVR. 8) After uploading, the ‘INFO’...
  • Page 122 Firmware Upload window 1) display the name of update DVR. 2) display the update file folder that you selected. 3) display uploading status of update file. 4) display the uploading progress of update file by %. 5) display the update DVR IP information. 6) select update file location.
  • Page 123 Setup Upload, Download - You can upload, download the setup value of NS DVR connected to network by CMS. Check points before use 1) check if the version of NS DVR is later than ‘usb_ft_16-080311-01’. [consultation] you can check the version as follow; ‘NS DVR FRONT의 FUNCTION KEY STATUS STATUS BOX’...
  • Page 124 5) Click ‘Browse’ button from ‘Setup Upload’ window. 6) Select the saved NS DVR setup value from ‘Open’ window. Click ‘Open’ button. 7) Click ‘Update’ button from ‘Setup Upload’ window. Then it will start uploading the NS DVR setup value to the selected DVR. 8) After uploading, the ‘INFO’...
  • Page 125 How to use Setup download function 1) Connect DVR that you want to setup upload, download. 2) Select DVR that you want to setup upload, download from DVR list. 3) Click ‘REMOTE SETUP’ button ( 4) In ‘SETUP’, go to ‘SYSTEM’ and select ‘Setup’ from Update options, click ‘Export’ button. 5) Click ‘Browse’...
  • Page 126 7) Click ‘Download’ button from ‘Setup Download’ window. Then it will start downloading NS DVR setup value. 8) After downloading, the ‘INFO’ window will pop up. click ‘OK’ button. Standalone DVR Page: User Manual Ver. 2.2...
  • Page 127 Chapter 9 Web CMS user Web CMS : Remote monitoring available through internet explorer without the specific software. 36 Display Screens, Division screens, PTZ Controller supported. • Input IP or domain on the address. • Install ActiveX file related to Web CMS. Standalone DVR Page: User Manual Ver.
  • Page 128 Starting screen of connection Click ‘Connect’ button to input each information and IP address for connection. Click ‘Connect’ button after input DVR Type, name, user’s ID, password, Site IP, port number etc. Standalone DVR Page: User Manual Ver. 2.2...
  • Page 129 Chapter 10 Mobile Access Mobile View (In case of no application.) This product supports to access IPOD, 3G phone’s mobile. 3G phone must have access to internet via wireless LAN. Please follows as below when you have access to the internet. 1) Please input the address as below.
  • Page 130 1) How to change the channel If you select “Channel “ menu, DVR’s channel list will show up . You can select on the desired channel. 2) How to change the screen size To change the channel video size, select “Size” menu. 3) How to change refresh time You can change the frame of refresh time as displayed on the screen.
  • Page 131 * Mobile Viewing through our mobile viewer We support our mobile viewer for iPhone. [How to install] : You can download and install “A Viewer“ through iPhone application store. Click application store Search “a viewer” Click a project’s A Viewer icon Click Install Then A Viewer icon will be generated in your iPhone.
  • Page 132 Click the button, the DVR List window will show up with the DVR name as you input. : Save it and return to DVR List menu : Do not save it and return to DVR List menu Click the ‘DVR Name’, then the mobile viewer will be activated as below. : Zoom in on 1ch screen mode : Zoom out on 1ch screen mode : Change a channel to the very previous channel...
  • Page 133 * Mobile Viewing through our mobile viewer( Android phone) We support our mobile viewer for Android phone. [How to install] : You can download and install “dvroid“ through Android market. Click Android market Search “dvroid” Click a project’s dvroid icon Click Install Then dvroid icon will be generated in your Android phone.
  • Page 134 Click the button, the DVR List window will show up with the DVR name as you input. : Save it and return to DVR List menu : Do not save it and return to DVR List menu Click the ‘DVR Name’, then the mobile viewer will be activated as below. : Zoom in on 1ch screen mode : Zoom out on 1ch screen mode : Change a channel to the very previous channel...
  • Page 135 C hap ter 1 1 M I S C 1. Number of supporting port 1 Port 1 Port 1 Port 4 Port 8 Port 16 Port 8 Port 8 Port 16 Port 1 Port 1 Port 1 Port 4 Port 4 Port 4 Port 4 Port...
  • Page 136 3 . RS- 4 8 5 connecting configuration 1 ) DVR- K ey Board controller [Key board controller] Note) For correcting operation of DVR when using this function, user must setup System-ID. (SETUP SYSTEM MISC) Standalone DVR Page: User Manual Ver. 2.2...
  • Page 137 3 . RS- 4 8 5 Connecting Configuration 2) DVR- PTZ camera Cross Note) For correcting operation of DVR when using this function, user must setup System-ID. (SETUP SYSTEM MISC) Standalone DVR Page: User Manual Ver. 2.2...
  • Page 138 2W AY Audio confiuration LAN/W AN LAN/W AN Speak er Network Speak er Note: For using two way audio communication, W indows sy stem, it must be operated correctly for Audio device without problem. Control Panel H ardware device manager check at Sound, video and game controllers Standalone DVR...
  • Page 139 after preparing MIC / Speak er or Headset , it must be connected with CMA sy stem. [ CAMS/CMA Rear Pannel ] Mic in Speaker out after preparing MIC / Speak er or Headset , it must be connected with DVR sy stem. [ Standalone DVR] Mic in Speaker out...
  • Page 140 Specification PRT 3004 PRT 3008 PRT 3016 Item Connecttion Video Input(BNC) Audio In(RCA) Audio Out(RCA) Video Output(BNC) Alarm Input Alarm Output(relay) 1(1) 1(1) 1(1) USB port PTZ(485) Ethernet RJ-45, 10/100Mbps Power Supply On board On board On board 720(H) × 480(V) Live NTSC Resolution...
  • Page 141 Specification Item PRT 7004 PRT 7008 PRT 7016 Connection Video Input(BNC) Audio In(RCA) Audio Out(RCA) Video Output(BNC) Sensor Input Alarm Output(relay) USB port PTZ(485) Ethernet 10/100 Base-Tx Ethernet(RJ45) Live NTSC 720(H)×480(V) Resolution 720(H)×576(V) Live Mode 1,4 screen, Seq 1,4,9 screen, Seq...
  • Page 142 Specification Item PRT 9004 PRT 9008 PRT 9016 Connecttion Video Input(BNC) Audio In(RCA) Audio Out(RCA) Video Output(BNC) Alarm Input Alarm Output(relay) USB port PTZ(485) Loop Out Ethernet RJ-45, 10/100Mbps Live NTSC 720(H) × 480(V) Resolution 720(H) × 576(V) Live Mode 1,4 screen, Seq 1,4,9 screen, Seq 1,4,9,16 screen, Seq...
  • Page 143 This remedy is your exclusive remedy for breach of this warranty. The proof of purchase is required for the warranty. This warranty shall not apply to repairs or replacements necessitated by any cause beyond the control of Proctor Security Systems, including but not limited to, 1) improper installation...

  • Page 144: User Manual

    Standalone DVR Standalone USER MANUAL Page: User Manual Ver. 2.2...

This manual is also suitable for:

Prt 7008Prt 9008Prt 7016Prt 9004Prt 9016Prt 3004 ... Show all

Table of Contents