Advertisement
HV 100 Effects
™
Effects Level
this control adds the digital effects section and mixes it into the main signal. Sixteen
different effects are available.
Program Select
this switch will select any of the sixteen different effects.
Effects Active
this switch engages the digital effects section. The footswitch over-rides this switch
when it's plugged into the amp.
Toggle Tap
this switch is a dual function depending on which effects program is selected. On "toggle"
effects, this button pages through alternate variations of the effect. For example, for the Spring Reverb,
it pages through 3 different degrees of brightness. On "tap" effects, this button selects the rate time at
which the effect cycles, by tapping the switch twice. For example, for the Delay setting, it selects the
amount of time between delay repeats (If the 2 tap is beyond the maximum setting, the time will
default to the longest available choice).
Effect Program
Spring Reverb
simulates the spring reverb pan found in vintage tube amps
Slap Back
a fast 80ms delay for getting those Rockabilly tones
Chorus
a beautiful thick chorus that can swish with the best of them
Delay
an organic sounding delay that has that analog warmth
Phaser
a sweet and swooshy '70s sounding phaser
Tremolo
a classic sounding tremolo with a hint of vibrato
Trem/Reverb
a combination effect of tremolo and room reverb
Delay/Reverb
a combination effect of the delay and room reverb
Room Reverb
the reverb sound of your amp being played in a room
Hall Reverb
the reverb sound of your amp being played in a large hall
Flanger
a deep flanger for getting those spacey sweeping tones
Rotary
gives you that twirling sound of those fancy old organ cabinets
Octave
shifts the pitch up or down one octave from the original signal
Auto Wah
a wah wah that automatically sweeps at your chosen speed
Roto/Reverb
a combination effect of Rotary with room reverb
Chorus/Reverb
a combination effect of chorus and room reverb
Effects Module Memory Aside from all the versatility of the built-in effects, the effects module in your
Kustom amplifier has the ability to store your favorite sounds. All the most recent changes to the Toggle
Tap button are saved in each of the 16 effect locations. For example, If you tap in your favorite delay
time, then go to chorus, and then go back to delay, your own tapped delay time will still be saved.
These setting changes are also retained when powering down the amplifier.
To Restore Factory Settings If you ever want to restore the effects to the factory default settings, you
can do this by selecting Program 1 (Delay/Reverb), then holding the tap switch down and
simultaneously selecting Program 2 (Trem/Reverb).
nd
Description
Toggle Tap
X
pages through 3 different degrees of reverb brightness
X
toggles between Slapback and Slapback/Reverb
X
X
adjusts delay time....maximum delay = 680 mS
X
X
X
X
adjusts delay time.....maximum delay = 350 mS
X
X
X
X
ramps between fast and slow rotary speeds
X
toggles between octave up and octave down
X
X
ramps between fast and slow rotary speeds
X
6
Toggle Tap Function
adjusts chorus rate time
adjusts phaser rate time
adjusts tremolo rate time
adjusts tremolo rate time
adjusts reverb decay time
adjusts reverb decay time
adjusts flanger rate time
adjusts auto wah rate time
adjusts chorus rate time
Advertisement
