Package Contents; System Requirements - Lancom AirLancer USB-54pro Quick Installation

AirLancer USB-54pro – AirLancer USB-300 – AirLancer PCI-54pro
Chapter 1: Installation
1 Installation
The chapter contains instructions for the installation of the AirLancer wireless
LAN adapter. Following the installation of hardware, drivers and AirLancer
software, the access to a wireless network still has to be set up. This
configuration is described in chapter 2.

1.1

Package contents

First of all check that the package contents are complete. The following
components should be in the box:
If parts are missing, please refer to your dealer.
1.2

System requirements

Before the installation, please check that your computer meets with the
system requirements:

3
Detailed information on your AirLancer WLAN adapter is available in
the electronic documentation on the AirLancer 54 Mbit CD.
AirLancer USB-54pro, AirLancer USB-300 or AirLancer PCI-54pro
USB cable (AirLancer USB-54pro and AirLancer USB-300 only)
External 360° dualband antenna (AirLancer PCI-54pro only)
CD with drivers, the Client Monitor and electronic documentation
Windows 2000, Windows XP or Windows Vista
CD-ROM drive
One free PCI slot (as per PCI specification 2.1 or higher; AirLancer PCI-
54pro only)
One free USB 1.1 or USB 2.0 interface (AirLancer USB-54pro and AirLancer
USB-300 only)
A USB 1.1 interface will not permit the AirLancer USB-54pro or
AirLancer USB-300 to operate at full speed as this interface is limited
to a maximum throughput of 12 MB per second.