Congratulations on your purchase of the NXG Technology NX-SOUNDBAR-40 Stereo Sound bar! Like all NXG products, great care has been taken in its design. A combination of advanced engineering and state-of- the-art materials will provide you with years of listening pleasure.
Page 4
acement ntilation hen placin ng the Sou und bar o n an ente ertainmen t center, b bookshelf f, or any pe of enclo osed spac ce, be sur re to allow w at least 2-3 inches s of space e around e unit for v ventilation...
REMOTE CONTROL BUTTON LAYOUT 1. POWER: Press to turn the Sound bar off or on. 2. CLOCK: Press to set the time. 3. SOURCE: Press to switch between Bluetooth, FM, AUX in and optical in. 4. TUNE BACK: Press to tune the FM radio. This button is for radio only. 5.
Listening to a Saved Radio Station 1. Press the SOURCE button to switch to FM radio mode. 2. Press the UP and DOWN buttons on the remote to cycle through saved radio stations. Saving a Radio Station 1. After tuning to the desired station, press the MEM button. 2.
Page 7
Hooking it up You can connect your TV or other external device to the Sound bar in several ways: ANALOG Wired Connection 1. Plug the 3.5mm end of either the RCA Audio Cable or the 3.5mm Audio Cable into the AUX IN located on the back of the Sound bar.
Page 8
Wall Mounting Using the included wall mounting accessories, the sound bar can be easily mounted onto a wooden or sheet-rock wall. Distance Between Brackets 24” 24 inches Tools Needed: A Bubble Level, Pencil, Drill, Tape Measure, and a Philips Screw Driver 1.
Troubleshooting: Check that the power is switched on at the wall. No power Check if the power cord is properly connected to the power outlet. Check that the volume control is NOT at minimum setting. No sound Check that it is NOT set to mute. No soundfrom Bluetooth Check if you have properly paired with the source - pairing code 0000 connection...
Need help?
Do you have a question about the nx-soundbar-40 and is the answer not in the manual?
Questions and answers