Aquatic AI7240R Specification Sheet

POINT rEyES
luxury SErIES
Pump
Option 2
Standard Pump
Location
71 3/8"
SPECIFICATIONS:

GeneRal SPecIfIcatIonS:

Tub Size 71 3/8" x 39 1/4" x 22"
181 cm x 100 cm x 56 cm
Bathing Well 44" long
25" wide
21 1/4" interior depth
Shipping Weight 194 lbs. / 88 kg
Tub Weight Filled 854 lbs. / 387 kg
Tub Only Weight 106 lbs. / 40 kg
Gallons to Overflow 86 gal. / 326 L
Gallons to Operate 67 gal. / 254 L

electRIcal SPecIfIcatIonS:

Pump 1.75 HP; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Optional Heater 1.5 kW; 12.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
fax-on-demand
document # 1047
The manufacturer accepts a 1/4" variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
60
ai7240R / ai7240RTo (Tub only)
Model #
Deck Width
3 1/2"
39 1/4"
22"
20 5/8"
StandaRd equIPMent:
7 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 1 Recessed Rotary Massage Jet
aquatic quality features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- Bath-Side On/Off Electronic Button
- "Quiet Pad" Anti-Vibration Pump Mount for Quiet Pump Operation
- 2 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base (Whirlpool)
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
Next Day Ship MoDel / whirlpool oNly
• Next Day Ship Model equipped with heater; upcharge applies.
39 1/4"
18 3/4"
note: tub only units do not come standard
with the Pre-leveled aBS Support Base.

oPtIonal equIPMent:

Chromatherapy LED Lighting
•
Comfort Pillow - Oval or Rectangle
•
Jet Finish
•
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
Bolt-On Grab Bar
•
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
1.5 kW Inline Maintenance Heater
•
Lift & Turn Waste and Overflow
•
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overflow
•
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
2 HP, 3-Speed Run-Dry Pump Upgrade
•
Optional Pump Location
•
Remote Pump Location
•
Pre-leveled ABS Support Base (Tub Only)
•
Hand Held Jet - Chrome or Polished Brass
•
Premium Colors
•
All acrylic colors featured by Aquatic match the
industry's leading fixture manufacturers.
Rough-In Plumbing
Measurements
16 1/4"
5 1/4"
www.aquaticwhirlpools.com 800.555.5324
October 2007