Table of Contents
Advertisement
Quick Links
Congratulations on purchasing OSMOSIS™ by Molten Voltage
OSMOSIS™ is a simple-to-use MIDI Mapper and Filter that responds to MIDI Program Changes
by sending out up to 5 different Program Changes as well as 16 Control Change or Note On messages all
on separate MIDI Channels. OSMOSIS can also actively filter various types of incoming MIDI data, re-
map an expression controller, and rectify running status data.
OSMOSIS uses Molten Voltage's SIMI as its display for programming. Once programmed,
OSMOSIS runs independently.
Key Features
•
A powerful, yet simple-to-use MIDI Mapper
and Filter for your PedalBoard
•
Greatly expands the functionality of simple
MIDI Controllers
•
Sends up to 5 Program Changes in response
to each of 128 MIDI programs
•
Sends up to 16 Control Change or Note on
Messages in response to each of 128 MIDI
programs
•
Re-maps expression controllers to a different
controller value and MIDI channel for each
program
•
Seamlessly merges incoming MIDI data
including MIDI Clock
questions@MoltenVoltage.com
OWNER'S MANUAL
•
Filters incoming MIDI data of your choice
•
MIDI Clock filtering can be activated for
individual programs
•
Rectifies MIDI data received in the Running
Status format
•
Simple to Program using SIMI, Molten
Voltage's PedalBoard MIDI Display
•
Works with any MIDI Controller
•
Compact design for modular PedalBoard
layouts
•
Solid, Professional-Grade construction,
including Riveted Steel MIDI Jacks
© 2015 - MoltenVoltage.com - All Rights Reserved.
v 1.6
Advertisement
Table of Contents
Related Manuals for MoltenVoltage OSMOSIS
Summary of Contents for MoltenVoltage OSMOSIS
- Page 1 5 different Program Changes as well as 16 Control Change or Note On messages all on separate MIDI Channels. OSMOSIS can also actively filter various types of incoming MIDI data, re- map an expression controller, and rectify running status data.
-
Page 2: Midi Input
MIDI Input Connect a standard 5-pin MIDI cable from the device sending MIDI Program Changes to the MIDI IN Jack (C) on OSMOSIS. When a Program Change is received on the correct MIDI Channel, OSMOSIS displays the stored message. questions@MoltenVoltage.com ©... - Page 3 Connect the MIDI THRU jack on SIMI to your MIDI gear that OSMOSIS will control. Set the MIDI Channel on your MIDI Controller to the same MIDI Channel as OSMOSIS. Note: You can change the MIDI Channel on OSMOSIS as described in the Global Variables section, below.
- Page 4 Program Change on the right MIDI Channel while in Program Copy Mode. Holding the button for about 2 seconds causes OSMOSIS to exit Program Copy Mode and display the message “CHANGES *SAVED*”. Once that message is displayed, OSMOSIS has returned to normal operation and can be disconnected from SIMI.
-
Page 5: Program Variables
Molten Voltage™ OSMOSIS™ Owner’s Manual - p.5 Program Variables Program Change Send Values OSMOSIS will send up to five (5) Program Changes in response to an incoming Program Change. The 5 outgoing program changes are labeled A-E. Display: PC-[A-E] Range:... - Page 6 Owner’s Manual - p.6 Control Change Controller or Note On Values OSMOSIS will send up to sixteen (16) Control Changes / Note On messages in response to an incoming Program Change. The 16 outgoing Control Change / Note On messages are labeled A-P.
- Page 7 Control Change Data Value or Note On Velocity OSMOSIS will send up to sixteen (16) Control Change / Note On messages in response to an incoming Program Change. The 16 outgoing Control Change / Note On messages are labeled A-P.
- Page 8 OSMOSIS™ Owner’s Manual - p.8 Expression Controller 1 and 2 Destination OSMOSIS can change the Controller Number and MIDI Channel of an incoming Expression Controller. The incoming Controller Value is Global Variable EXP. MAP CC., described below. Display: EXP[1 or 2]. MAP DEST.
- Page 9 Global Variables Global Variables affect the way OSMOSIS works for every program. To access Global Variables, hold down the button while powering OSMOSIS on and the message “EDIT GLOBALS” will be displayed until you release the button. Pressing the button quickly will cycle OSMOSIS through its Global Variables in the order shown below.
- Page 10 Molten Voltage™ OSMOSIS™ Owner’s Manual - p.10 Pass or Block incoming data on the Wrong Channel Display: PASS ALL CHAN. Range: ON (Pass) and OFF (Block) Function: Interacts with PASS CC THRU., PASS PC THRU., and PASS KEY DATA. to determine whether to pass only the data on the MIDI RCV CH.
- Page 11 Molten Voltage™ OSMOSIS™ Owner’s Manual - p.11 Pass or Block incoming Keyboard Data Display: PASS KEY DATA. Range: ON (Pass) and OFF (Block) Function: Determines whether or not incoming Keyboard data is passed through. This includes Note Off, Note On, Aftertouch, Channel Pressure, and Pitch Wheel.
- Page 12 OSMOSIS will read and respond to data sent in the Running Status format. If OSMOSIS is set to Pass through Program Changes, Control Changes, or Keyboard data, and that data shows up in the Running Status format, OSMOSIS re-transmits that data in its complete form.
-
Page 13: Midi Implementation Chart
Make sure your MIDI Controller is configured to send MIDI Program Changes on the same Program Changes MIDI Channel as OSMOSIS. Consult the User’s Guide for your MIDI Controller. General Guidelines Keep MIDI cables as short as possible. Long cables cause errors. If you need more length, consider using a MIDI repeater. - Page 14 Voltage disclaims all liability arising from this information and its use. No licenses are conveyed, implicitly or otherwise, under any Molten Voltage intellectual property rights. OSMOSIS, SIMI, SIXY, CTL-Sync, MASTER CONTROL, MIDI Splitty, TEMPODE, NODE, Tru-Foot, Molten Voltage, Visionary Effects, “Sturdy Scalable Simple”, “streamline your sound”, “Design simple Design sublime”, and “the future just showed up”...
Need help?
Do you have a question about the OSMOSIS and is the answer not in the manual?
Questions and answers