Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Falcon FT5020
Summary of Contents for Falcon FT5020
- Page 1 User Manual...
-
Page 2: Display Symbols
Instruction Keys: Repertory keys Recall key Redial key Mute key Handsfree / Massage waiting Quiet key Loud key Set key Up key Down key OK key (dial number displayed) Display symbols: In setting mode No memory content Ready for use Microphone off Baby Call (direct call) number set Recall key pressed... -
Page 3: Recommended Installation Of Telephone
Preparing the telephone for use Recommended installation of telephone Do not expose the telephone to direct sunlight or other sources of heat. Operate at temperatures between +5°C and +40°C. Maintain a distance of at least one metre between the telephone and radio equipment, e.g. -
Page 4: Activating/Deactivating Handsfree Talking
Making Call Dialling a number Lift handset, dial number. or... Dial number (you can delete wrongly entered digits with and then enter the correct digit) and press the OK key. Lift the handset if you want to talk via the handset. Any digits after the 20th digit are moved from right to left in the display. -
Page 5: Saving Numbers
Saving numbers Different telephone settings must be completed with the Set key so that they are available permanently. In order to cancel without saving, e. g. after an incorrect entry, replace the handset instead of pressing at the end. The original setting is then retained. Saving repertory numbers You can save up to 10 phone numbers on the repertory keys. -
Page 6: Setting The Ringer Frequency
Adjusting the telephone Adjusting the ringer volume The volume of the ringer can be set to one of 4 levels and can also be deactivated completely (default setting: level 4). To adjust when the telephone is idle: Initiate function. Adjust the volume with the Loud/Quiet key. Press the Set key. -
Page 7: Activating/Deactivating The Mute Melody
Adjusting the telephone Mute You can deactivate the telephone's handset and microphone. Then the other party can no longer hear you. During a call: Press the Mute key Activate: Press the key again. Activating/deactivating the mute melody You can activate and deactivate the mute melody for the mute (default setting: on). Initiate function. -
Page 8: Activate/Deactivate Call Duration Display
Adjusting the telephone Activating/deactivating the telephone lock The telephone can be locked completely (with the exception of a baby call phone number if set) so that it cannot dial any phone numbers, including the baby call phone number. You can continue to receive incoming calls. Initiate function. - Page 9 Operation on a PABX Enter/delete an external line prefixe If you are using your telephone on a PABX, you may have to save one or more external line pr xes. A dialling pause is set automatically with the external line Initiate function.
-
Page 10: Calls List
Calling Line Identification Using Calling Line Identification Under the following conditions, the phone numbers of incoming calls are shown on Both your network and the caller's network pro ider must offer Both you and the caller must ha e requested this ser ice (if necessary If these conditions are met, but a caller has suppressed Calling Line before making the call, you will see on the display instead of the phone... - Page 11 Calling Line Identi cation Deleting entries in the calls list Delete all entries at the same time Press the Down/Up key. Press the Set key, star key and Set key one after another. The calls list is deleted and closed. Delete individual entries Scroll to the desired entry.
- Page 12 Appendix If your telephone is not working perfectly - No signal tone: Check the telephone line cable connection. The tone volume might be set to 0. - Lift handset, no dialling tone: Is the handset cable connected correctly into the handset and the telephone socket? - Dialling tone audible but telephone will not dial: The connection is OK.
Need help?
Do you have a question about the FT5020 and is the answer not in the manual?
Questions and answers