Table of Contents
Advertisement
4-4-11 Pick-Up Ass'y Removal
1) Remove Washer Œ and lift up the Gear Feed U ´.
2) Disconnect FPC ˇ from CN2.
3) Push the Stopper ¨ in the direction of arrow "A".
4) Pull the Shaft P/U ˆ in the direction of arrow "B" to remove.
5) Lift up the Pick-up Ø in the direction of arrow "C".
CAUTION ; Do not stain with grease Pick-Up Lens, Turn table, Roulette Disc, Tray Disc, Belt.
Ø PICK-UP ASS'Y
ˇ FPC
ˆ SHAFT P/U
Samsung Electronics
ˆ SHAFT P/U
"C"
¨ STOPPER
Fig. 4-19 Pick-Up Ass'y Removal
Disassembly and Reaasembly
ΠWASHER
´ GEAR FEED U
CN2
"B"
"A"
4-19
Advertisement
Chapters
Table of Contents
