Download Print this page

SmartPower COPIER GUARDIAN II User Manual

Electronic power conditioner

WITH SMART

COPIER G UARDIAN II

GROUND

ELECTRONIC POWER CONDITIONER

Thank you for purchasing this Copier Guardian II.

Smart Power Systems is dedicated to developing

and manufacturing the highest performance power

protection and filtration devices for your electronic

equipment. Proper use of this device will provide

the protection needed for your connected

equipment.

Table of Contents

Need help?

Do you have a question about the COPIER GUARDIAN II and is the answer not in the manual?

Page 1 COPIER G UARDIAN II COPIER G UARDIAN II GROUND ELECTRONIC POWER CONDITIONER Thank you for purchasing this Copier Guardian II. Smart Power Systems is dedicated to developing and manufacturing the highest performance power protection and filtration devices for your electronic equipment.
Page 2 • Use only in dry locations indoors. • Avoid dropping the unit. • Only plug the Copier Guardian II into a three pronged grounded outlet. This unit is not to be used with any type of ground “lift” or pin eliminator.
Page 3 2. Plug the equipment into the Copier Guardian II Unit 3. Plug the Copier Guardian II unit into grounded wall outlet. 4. Your equipment is now fully protected. Place the Copier Guardian II where monitoring lights can be observed. Installation for Protection for Telephone Line and Network Cable TELEPHONE 1.
Page 4 IMPORTANT If for any reason you need to return the Copier Guardian II unit to the manufacturer, you should obtain an RMA (Return Material Authorization) number before returning the unit. To request an RMA number please call 1-800-772-7633 or visit the website at www.smartpowersystems.com/main/rma.htm...