Page 1
4.3” Rear View Mirror Monitor with Digital Video Recorder & integrated front HD camera RVM-043DVR User Manual...
Page 3
You have purchased this Parkmate product with the understanding that its use is as an aid only. We highly recommend that you have this product professionally installed to ensure that it will...
Also featuring G-Sensor and Motion Detection automatically triggered recording, the RVM-043DVR is a powerful, convenient and simple to use device that will enhance your driving experience.
1.5 Introduction to Button Function Auto LCD dimming Rear Camera Recording Display Indicator - Flashes when recording Front Camera Recording Light Sensor Short press: on/off screen display Long press: on/off DVR The front camera records video and still images in front of your car. Bracket Rotation angle: X-150, Y-360, Z-150 Power on / off...
Rear view camera connector Extension Cable (plug into extension cable) To rear camera Chapter Two: Product Installation 2.1 How to Install RVM-043DVR Rear view Mirror Different vehicles use different mounting brackets depending on the manufacturer. Original Mirror Base on windsheild Note: While the mirror in some vehicles is easy to remove, in some it may be a difficult process.
2.2 How to change base & install RVM-043DVR Rear view mirror on Windsheild Please see below a list of brackets for various vehicles. Choose the appropriate bracket for your vehicle and change the base according to the instructions that follow.
2.3 How to install the (optional) rear view camera The rear view camera is usually installed above the middle of the license plate frame. Rear view Mirror Monitor Camera (Not Included) General Installation location If your vehicle does not already have a reverse camera installed it is recommended you install a camera in the middle rear of the car to allow for both front and rear simultaneous recording and rear view blind spot viewing...
Chapter Three: Functions 3.1 Highly reflective mirror Clear rear view displayed on highly reflective mirror Highly Reflective Mirror Regular Mirror 3.2 Optional Reverse Camera When you select reverse gear, the rear-view monitor will automatically display the (optional) reverse camera. Not in reverse In reverse 3.3 Automatically Adjusting Brightness The brightness of the screen varies with ambient light to give the driver a clear image when...
3.5 Date It is recommended to set the date and time so they can be accurately captured on your recordings for future reference. To set the date and time, ensure the DVR is not recording, press “MENU” on the remote control. Press “MODE” to switch to “SETTINGS” menu, then switch to “DATE SET”...
3.9 Recording Source The DVR has “front camera recording”, “rear camera recording” and “dual camera recording” modes for to suit your preference. To select camera/s to record from, ensure the DVR is not recording, press the “MENU” button on the remote to enter the settings menu, press “MODE”...
Press the “PIP” button to view two video sources which can be displayed on the screen at the same time. Forward & reverese video displayed Forward camera video Forward camera video Reverese camera video 3.12 Motion Detection Setting Motion Detection restricts your camera to recording only when it senses motion. To enable motion detection ensure the DVR is not recording, press the “MENU”...
3.14 Playback Mode To enter Playback mode, press the “mode” button to switch to playback mode, press the “UP” and “DOWN” buttons to select the video file. Press “REC” to play/stop the video. Press “MENU” to enter the delete video menu, press “REC” to delete the current video. 3.15 Photo Mode To set your DVR to Still Photo Mode, ensure the DVR is not recording, press the “MODE”...
Page 16
Directed Electronics Address: 44 Translink Drive, Keilor Park Victoria Australia 3042 Ph: +61 03 8331 4800 Email: warranty@directed.com.au To view the complete Parkmate range or for details on how to contact us, please visit our website at www.parkmate.com.au www.parkmate.com.au www.directed.com.au...