Download Print this page

Genie CCTV SD-SMO User Manual

Smoke detector camera with dvr

Advertisement

Quick Links

User Manual

SD-SMO
Smoke Detector Camera with DVR

Packing Contents

Camera Unit
User Manual
Romote Control
1
2
Cautions
Do not install the camera in extreme temperature conditions.
Do not install or use the camera in an environment where the humidity is high.
Do not install the camera under unstable lighting conditions.
Never use the camera close to gas or oil leaks.
Do not disassemble the camera.
Do not drop the camera or subject it to physical shock.
Never keep the camera facing directly toward strong light.
Do not expose the camera to rain, moisture or spill beverages on it.
Wall Anchor Plastic
Wall Anchors
Sheath
3
4
5
MODEL NO.
SENSOR
PIXELS
HORIZONTAL RESOLUTION
SCANNING SYSTEM
SENSITIVITY
LENS TYPE
S/N RATIO
GAMMA CORRECTION
GAIN CONTROL
BACK LIGHT COMPENSATION
AUTO EXPOSURE
WHITE BALANCE
DAY & NIGHT
AUDIO
VIDEO COMPRESSION
AUDIO COMPRESSION
RESOLUTION FOR VIDEO
FRAME FOR VIDEO
IMAGE QUALITY
RECORDING TIME (1HR)
VIDEO MODE
PLAYBACK MODE
OVERWRITE
STORAGE MEDIA
OPERATING TEMP.
POWER SUPPLY
POWER CONSUMPTION
DIMENSIONS
WEIGHT
*The above specification is subject to change without prior notice
GN-October 2011
Specification
SD-SMO
1/3" CCD Sensor
PAL: 752(H)*582(V)
600 TV lines
2:1 Interlace
0.5 Lux/ F2.0
Pinhole 3.7mm
More than 48dB
0.45
Auto
Auto
Auto
ATW with MCT Technology (Multi-Colour Temp)
Auto
None
MPEG4 (ASF Format)
PCM
640x576 (PAL)
25/12/4 Fps at 640x480
High
Middle
1.3~1GB
900~700MB
Manual / Scheduled / Motion Detection
Search by Time
Yes / No
SD / MMC card (SDHC version, up to 32G)
-10° ~ +45° C
DC 12V
200mA ±10% under DC 12V
Ø142mm* 41.5(H)
151g
Low
700~500MB

Advertisement

loading

Summary of Contents for Genie CCTV SD-SMO

  • Page 1: User Manual

    User Manual Specification MODEL NO. SD-SMO SD-SMO SENSOR 1/3” CCD Sensor PIXELS PAL: 752(H)*582(V) Smoke Detector Camera with DVR HORIZONTAL RESOLUTION 600 TV lines SCANNING SYSTEM 2:1 Interlace SENSITIVITY 0.5 Lux/ F2.0 LENS TYPE Pinhole 3.7mm S/N RATIO More than 48dB GAMMA CORRECTION 0.45...
  • Page 2: Operation Manual

    Installation Operation Manual REC. Mode Manual Go to “ Scheduled Time ” Setting Scheduled to set up Go to “Motion Detection” Setting Motion Detection to set up Press (UP & DOWN) to select item. Step 1. Install the camera and ensure each plug Press (REC) to start recording.