Table of Contents
Advertisement
rAbout the Sh in Knob Cap
Shifting
will
be easier
if
the supplied
shift
knob cap is mounted
However,
for
EOS
cameras
with built-in
flash, the cap
the lens'
mounting/detaching,
or
during shift/rotation
for use with
EOS-1,
EOS-1
0,
EOS-1Ds, and EOS
1
Remove the shift knob
screw.
U
The screw (length 2.2mm) originally in the shift knob cannot be
keep the
[iI
Use a watchmaker's
screws.
(pA).
will
come
in
contact
with
the camera during
operation.
The
shift
knob cap is recommended
50 series.
2
Mount
the cap by squeezing
the
shift
knob,
and then
the
supplied screw.
To remove the
cap,
remove the
screw and
pull out
the
shift
knob
cap
in
place.
Always use the supplied screw.
screwdriver
(Phillips head type) to remove
Mounting/Removing
The
lens
of TS-E17mm
the
exclusive lens cap
when
•
Removing
To
remove
the
cap,
hold
down
it
into
and
turn
the cap
in
the
direction of
fix it using
position mark on the cap aligns
[iI
The
removed lens cap can be hooked on the tripod
cap.
using
the supplied
strap.
used
to
or mount
the Lens Cap
f/4L
protrudes from the front
frame.
To protect the
not
shooting.
••
Attaching
To
the button
on
the side
attach the
cap,
the
arrow
until
the
mark
with
the red
with
the red
dot.
turn the cap as shown by the
dot is aligned
with
U
Do not use the
cap is attaching the
break.
(TS-E17mm
f/4L)
lens,
keep it covered with
align
the cap's attachment position
dot on
the front of the
lens,
then
arrow
until the
lens'
red
the cap's stop position mark.
strap
to
lift
the lens while the lens
lens.
The lens may fall and
Advertisement
Table of Contents
