Makita 5201N-A Technical Information

TECHNICAL INFORMATION
For Models
Description
CONCEPTION AND MAIN APPLICATIONS
This is a model made by improving 5201, of which design
has been changed totally. The exhausting outlet of chips is
put in rear side and the gripping angle of Handle is
changed for easier operation. Also, the power is improved,
the weight is decreased, and an electric *break equipped
type has been developed concurrently for promoting
*Electric brake function only for 5201N-A
Specifications
Motor
Voltage
Current
Cycle
Continuous Rating Input(W)
no load speed r.p.m.
Saw blade diameter
Max. Cutting
Capacities
Overall length
Net Weight
Power supply Cord
Standard equipment
Saw blade of double-purpose for lateral and horizontal directions (attached to the machine)
Parallel ruler 1pc, Spanner13 1pc, Spanner22 1pc
Optional accesories
Cross cut saw blade260
Combination blade260
Cut-off wheel 255(No.12,No.14)
Circular saw stand
Features and benefits
1. Functional design, light weight, easy to handle, improved efficiency
2. Scattering of ground particles has been decreased and operativity has been improved by placing the
chips exhaust outlet in rear side.
3. Since a saw blade will stop within two seconds or so after switching off in electric brake equipped
model, you can work safely.
5201N-A
MAKITA 260mm(10-1/4") Circular Saw
Series commutator motor
Single phase 100V
15A
50/60Hz
1430W
3700R/min.
260mm(hole diameter 25mm)
97mm
at 90 degrees
at 45 degrees
64mm
445mm
8.3kg
5m
New Tool