Disassembly Of The Parts (Indoor Unit) - LG A2UC146FA0 Service Manual

Disassembly of the parts (Indoor unit)

Disassembly of the parts (Indoor unit)
1. SQ/SR/ST Chassis
Warning :
Disconnect the unit from power supply before making
any checks.
Be sure the power switch is set to "OFF".
To remove the Grille from the Chassis.
• Set the up-and-down air discharge louver to open
position (horizontally) by finger pressure.
• Remove the securing screws.
• To remove the Grille, pull the lower left and right side
of the grille toward you (slightly tilted) and lift it
straight upward.
1. Before removing the control box, be sure to take
out the wire screwed at the other end.
Earth
Conductor
58 Free Joint Multi Air Conditioner
2. To remove the Control Box.
• Remove securing screws.
• Pull the control box out from the chassis carefully.
3. To remove the Discharge Grille.
• Unhook the discharge grille and pull the discharge
4. To remove the Evaporator.
• Remove 3 screws securing the evaporator(at the
Display
P.C.B
Conductor
Sensor
Conductor
Motor
Conductor
Step Motor
Conductor
grille out from the chassis carefully.
left 2EA in the Eva Holder, at the right 1EA).