Table of Contents
Advertisement
Quick Links
DiSS NetMaster
NM-1000/2000 Series
NM-1004/1008
NM-2004DL/2008DL/2016DL
User Manual
※ The picture might differ according to the specifications.
©1997-2004 Sungjin C&C
Contents of this user manual and NM-2016DL software are protected under copyrights and computer program laws.
st
First Edition June 1
, 2004.
rd
3
Floor, B-dong, SKTwinTechTower, 345-9, Kasan-dong, Geumcheon-gu, Seoul 153-802, Korea
SungJin C&C
Customer Service: TEL : 02-2007-6327, 080-599-8272
FAX : 02-2007-6330
Thank You
Thank you for purchasing SungJin C&C's DiSS, Digital Security System.
Before operating the system, please read this User's Manual thoroughly and retain it for future reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for SungJin Techwin Co DiSS NetMaster NM-1004
-
Page 1: User Manual
DiSS NetMaster NM-1000/2000 Series NM-1004/1008 NM-2004DL/2008DL/2016DL User Manual ※ The picture might differ according to the specifications. ©1997-2004 Sungjin C&C Contents of this user manual and NM-2016DL software are protected under copyrights and computer program laws. First Edition June 1 , 2004. - Page 2 Warning Electric Safety To reduce a risk of fire or electrical shock. Do not expose this product to rain or moisture. Caution Lithium Battery Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
-
Page 3: Important Safeguards
Cautions Must follow these details to prevent material damage beforehand. Signs of Caution and Warning Warning: This sign indicates that the user could die or wounded seriously if not used or installed properly. Caution: This sign indicates that the user could be wounded or could expect property damage if not used or installed properly. - Page 4 Caution 1. Use the power cord, which is supplied or recommended by the supplier. The internal fan rotates in high speed and it may become a reason for accident. 2. Do not drop; give strong vibration or shock to the product. It may become a reason for malfunction.
-
Page 6: Table Of Contents
Table of Contents SYSTEM STRUCTURE..................................1 NM-1000 Series.................................... 1 NM-2000DL Series ..................................2 System Configuration ..................................3 NM-1000 Series Front Panel ................................ 3 NM-2000DL Series Front Panel ..............................4 NM-1000 Series Back Panel ................................ 5 NM-2000DL Series Back Panel..............................6 INSTALLATION.................................... -
Page 7: System Structure
1. SYSTEM STRUCTURE The following components are supplied with the NetMaster series. Check your NetMaster system and its accessories are securely packed. As you unpack your system, please be sure to check all of the following items are included. Carefully inspect each component to make sure nothing is missing or damaged. When any of these items is missing or damaged, notify your dealer immediately. -
Page 8: Nm-2000Dl Series
1.2 NM-2000DL Series Contents User Manual Power Cord Mouse D-sub Connector DiSS RemoteAgent CD 4/8CH BNC-to-D-sub Cable (Select by Max Channel Number) -
Page 9: System Configuration
2. System Configuration 2.1 NM-1000 Series Front Panel NM-1004/1008 Functions Functions Power Button USB Port Power LED CD-RW / DVD-RAM (Option) HDD LED 2.1.1. Power Button Press the power button after connecting power cord. 2.1.2. Power LED Shows the power is on. 2.1.3. -
Page 10: Nm-2000Dl Series Front Panel
2.2 NM-2000DL Series Front Panel NM-2004DL/2008DL/2016DL Functions Functions Power Button USB Port Power LED CD-RW / DVD-RAM (Option) HDD LED 2.2.1. Power Button Press the power button after connecting power cord. 2.2.2. Power LED Shows the power is on. 2.2.3. HDD LED Shows data is either being read or written in HDD. -
Page 11: Nm-1000 Series Back Panel
2.3 NM-1000 Series Back Panel Note Composition differs according to system model. (NM-1004/1008) Functions Functions Power Connection Circuit LAN Port Mouse Port Mic input Keyboard Port Speaker Output PTZ Controller Port Spot Monitor Output (BNC Jack) Printer Port Camera Image Input (BNC Jack) PC Monitor Output Sensor / Alarm Connection USB Port... -
Page 12: Nm-2000Dl Series Back Panel
2.4 NM-2000DL Series Back Panel Note Composition differs according to system model. (NM-2004DL/2008DL/2016DL) Functions Functions Power Selection Switch LAN Port Power Connection Circuit Speaker Output Mouse Port Mic Input Keyboard Port Alarm Input/Output Port USB Port Spot Monitor Output / RCA Jack PTZ Controller Port / RS-232C (COM1) Image Input / D_Sub NM-2004DL: 4ch 1ea... -
Page 13: Installation
3. INSTALLATION 3.1 NM-1000 Series Installation This section describes how to hook up NetMaster to peripheral devices. Connect the peripheral devices by referring to below picture. Install NetMaster series in flat surface, and use rubber mount if needed. Install on the rack in case of using 19 inch, and leave 2.5~3U(1U=1.75 inch or 4.45 cm) space for spare room. - Page 14 3.1.1. Power Connection Circuit Connect the power cord enclosed. Before connecting the power, convert the power switch, AC110V ~ 120V ->115, AC220V~240V->230V, depending on the Note power voltage on the power socket. 3.1.2. Mouse Port Connect the mouse enclosed. 3.1.3. Keyboard Port Keyboard can be connected.
- Page 15 3.1.12. Image Input Image input has analogue composite signal and can be set to NTSC or PAL, according to the requirement of the user during product order. Be sure to match the type of camera to be corresponding with the system. To get good quality image, check the power of the whole system and the safety of the ground construction.
-
Page 16: Nm-2000Dl Series Installation
3.2 NM-2000DL Series Installation Functions Functions Power Selection Switch LAN Port Power Connection Circuit Speaker Output Mouse Port Mic Input Keyboard Port Alarm Input/Output Port USB Port Spot Monitor Output / RCA Jack Video Input / D_Sub PTZ Controller Port / RS-232C (COM1) NM-2004DL: 4ch 1ea Printer Port NM-2008DL: 8ch 1ea... - Page 17 3.2.1. Power Selection Switch Select the power between AC 110V and 220V. Note Before connecting the power, convert the power switch, AC110V ~ 120V ->110, AC220V~240V->220V, depending on the power voltage on the power socket. 3.2.2. Power Connection Circuit Connect the power cord enclosed. 3.2.3.
- Page 18 3.2.12. Alarm Input/Output Port Alarm I/O Terminal, which is an option, is needed to use the sensor input and alarm output. Connect the terminal’s cable to the alarm input/output port. Then connect each sensor and alarm wiring to the corresponding terminal port. Sensor and alarm devices can be connected at maximum 4 for both.
-
Page 19: Operations Of Netmaster
4. OPERATIONS OF NetMaster 4.1 System Operations Power Connection Check the connection of the peripheral device of the system and connect the power. When the power cord of the NetMaster is connected, system program will start. To end the system, complete the booting and press the power button of the front panel. -
Page 20: Screen Layout
4.2 Screen Layout The screen layout of NetMaster is user-friendly to allow even novice users to easily learn and use the system. The following is the layout of the NetMaster main screen. Name Name Current Recording Screen Start Viewer Transmission Status Indicator Setup Sensor Indicator Administrator Login... -
Page 21: Detail Functions
4.3 Detail Functions The following are the functions for each button. User login is required to use these buttons. Current Recording Screen Displays the image of connected camera or recorded images. In case the camera is not connected, the vacant screen displays the logo of the product. Transmission Status Indicator Transmission status indicator flashes while connecting with remote surveillance Agent Series to indicate that it is presently transmitting. -
Page 22: Daylight Saving Time
Sensor Indicator The indicator flashes when the alarm sensor is indicated. The sensor is not operated when “Setting Customized Functions->Sensor->Enable Sensor and Control” category is not selected. Double click the sensor indicator with the left side of the mouse to start Note the Log Viewer. -
Page 23: Start Recording
Start Recording Start recording of all the live images. Stop Recording Stop recording of all the live images. Click [Stop Recording] button and a warning message will appear. When the recording does not start for more than 5 minutes, the recording will start again automatically. -
Page 24: Display Mode/Split Screen Mode
Channel Like TV channels, switches fast and conveniently between several channels to view images from each camera. When you click Number 2 button, images from camera 2 can be seen. Display Division Rotation When this button is clicked, the screen automatically alternates from group split screen. -
Page 25: Netmaster Info
NetMaster Info Double click the DiSS logo “D” on the main screen to view the general information of the NetMaster. The contents may differ depending on the product purchased. The S/W, Note H/W versions may differ depending on the product model and the user settings. -
Page 26: Setting Customized Functions
5. SETTING CUSTOMIZED FUNCTIONS NetMaster program is comprised of 9 tab windows, which appears when the customized function button is clicked on the main screen. 5.1 Camera Setting Selecting Camera Select a camera for desired time, motion detection range, image quality, resolution, motion sensitivity, etc. - Page 27 Simple Recording Time Schedule Recording Time 1 Select the recording time of images from the selected camera. For example, select from 0 to 24 hour and the recording will resume continuously for 24 hours. When 0 to 12 hour is selected, the images record for the first 12 hours and stop recording for the next 12 hours.
-
Page 28: Image Quality
All Ranges When all ranges is selected, any motion detected in the entire screen is recorded. The all ranges are set as default. Selecting “Cover Entire Area” and motion sensor detector allows to record only when motion is detected. Setting as continuous mode, all the images will be recorded in the entire area. -
Page 29: Network
5.2 Network In this section, the selections for the Internet, user ID and other options are selected to transmit images using Agent Series remote distance surveillance system. Network Select “Connect to Internet” to transmit images via Internet. Internet Setup Click the Internet [Setup] button and the Internet settings screen will appear. Input required information as requested. -
Page 30: Change Password
Connection Time Limit Select “Connection Time Limit” to limit the connection time with Agent Series. The time limit can be set up to maximum of 120 minutes. For example, to connect and transmit images through Agent Series for only 30 minutes, select “Connection Time Limit”... - Page 31 Remote Notification List (Supports only in NetAgent) Allow notification of events to NetAgent. DiSS can notify to NetAgent even though it is not connected. Following events are notified to the Agent. Note During sensor event (notifies event or connects channel) Stop/start recording Abnormal camera input Turn off or Shutdown(Power Off)
-
Page 32: Sensor
5.3 Sensor In the preference tap, set connecting camera to the Sensor and set the sensor for External Output with various other output. Enable Sensors and Controls Select this function to use the sensors and controls. If not selected, then sensor indicator in the main screen will be deactivated. -
Page 33: Recording Mode
Recording Mode When you want to record only the images on sensor-detected camera in full frame speed instead of the current recording images at the standard frame rate while the sensor is activated, choose “Optimize Frames Per Second”. When you want to record both current images and all images on sensor-detected camera, choose “Normal.”... -
Page 34: Camera Control
5.4 Camera Control This setting tap is for camera control. The manual may differ because the control functions vary between the manufacturers or by the products used. The manual Note provides the latest standard model. Use PTZ Select this category to use the camera controller for Pan (left right) / Tilt (up down). To activate the installed PTZ, select this category and the camera controller will be prepared automatically. - Page 35 Select Camera Select the desired camera to control. Several cameras can be selected for a controller. Selected camera will change to blue. Click once more and the selection will be disabling. Enable PTZ Pan/Tilt function or zoom in/out functions of the camera cannot be used when only camera controller is selected.
- Page 36 Zoom In Press down on the up arrow button ( ) to gradually enlarge the size of image on the screen. When the image is enlarged to an ideal size, release the button. Zoom Out Press down on the down arrow button ( ) to gradually reduce the size of image on the screen.
- Page 37 Exterior Equipment The exterior equipment icon will not appear when this function is not supported in the controller. Exterior equipment will work only for the selected functions in the camera controller. Camera Power When the camera’s power is connected to the controller, the power can be turned on or off from the controller by checking Camera Power.
-
Page 38: Video Input Signal Adjustment
5.5 Video Input Signal Adjustment Video Input Signal Adjustment allows users to individually adjust camera’s color brightness, contrast, Chroma U, Chroma V, and Hue for the adjustments. Select Camera Select camera for setting and the chosen camera will change to blue color. Current Viewing Screen Show the screen of the chosen camera. -
Page 39: Select Recording
5.6 Select Recording Setting for each recording screen channel alternation sequence and password is done in this tap. Selecting Recording Screen Not all the installed cameras can record. Only the selected cameras can record images. For example, when all the 4 cameras are connected, but only recordings on cameras numbered “1,3,4”... - Page 40 The system users can be managed by selecting [User Management] button. The administrator (admin) set as default can add, edit, remove other users or give authority to functions to each user. A. User Name: Enter user name. B. Description: Enter necessary explanations of the user. C.
-
Page 41: Recording Resolution
External Monitor Used when connecting the TV monitor other than PC monitor, which is basically connected. In this external monitor, only displays the image of the connected cameras by automatic alternation. Dwell Set up the automatic alternation time of connected camera. Camera Select Select camera to view by connecting to the external monitor. - Page 42 Display Division Select a screen mode from 1, 4, 6, 9, 10, 13, 16-split mode. 1. Select a desired split-screen mode from the recording display mode (choose 1-screen mode). 2. Select the camera sequence of the 4 cameras. Set the cameras into 4 sets like 1->2->3->4.
-
Page 43: Frame Rate Adjustment
5.7 Frame Rate Adjustment Adjust the frame for each channel of the NetMaster with this tap. When setting, the recording should be stopped. FPS Setting per Camera Contrast to the number of all the frames, set up the maximum frame number in each resolution and the resolution of each camera. -
Page 44: Recording Schedule
5.8 Recording Schedule Set recording mode and frame rate of each hour for each day and channel. To set up in this category, recordings must be stopped in the main menu. Images won’t be recorded while setting. Use Schedule While recording, schedule mode cannot be use. Stop the recording by pressing [Stop Recording] in the main frame to change the setting value. - Page 45 What Is Recording Mode It is used to store image for each appropriate time. The recording mode has six kinds. Motion Detection(M) : Records only when there is movement. Refer to setting value to see motion sensitivity when there is detection of movement. The sensor is not activated. Continuous(C) : Ignores images captured by the selected camera and records all the images.
- Page 46 Edit Adding schedule to all the frames can be done but only frame schedule can be edited in the chosen day. Click [Edit] button and “FPS Schedule Add” window will appear. The setting method is same with [Add] category. Delete Delete the categories of the selected list.
-
Page 47: Extra Setting
5.9 Extra Setting Upgrade Use the floppy diskette for NetMaster upgrade. For automatic installation, 1. Click [Start Upgrade] button and input password. 2. Insert floppy diskette and click the [Start Upgrade] button again. 3. Install the floppy diskette according to the upgrade diskette number. 4. - Page 48 Attach Screen Set to change the image of frame to JPG format before attaching the image. File may not be attached and only the sensor alarm may be sent when the file is protected with password. Total images attached will be [Before Sensor + After Sensor + 1 (while sensor event)].
- Page 49 Note Effects of Hard Disk Protector Solves the problem causing damage to the HDD data and windows or program, which is caused by sudden power-failure without auto shutdown. Operation of Hard Disk Protector Restarting after abnormal shutdown : When there is power-failure, the system shutdown abnormally while executing.
-
Page 50: Viewer
6. VIEWER Allows users to search through the recorded images by date, hour, and also by the camera number easily and conveniently. 6.1 Basic Operations 1. Click on the [Viewer] button in the NetMaster main menu. 2. When the password input box appears, enter the correct password to start the viewer. -
Page 51: Screen Layout
6.2 Screen Layout Functions Functions Adjust the Replaying Speed Channel Selection Image Adjust/Save Searched Image/Saving Recorded Pause File (Backup)/ Printing Replay End Viewer Selection for Playback Current Search Screen Panorama Time Position Indication Bar Zoom In/Out Search Condition: Date Smart Search (NM-2000DL Series) Searching/Search Sensor Event/Other Setting APP (NM-2000DL Series) Next Channel... -
Page 52: Detail Functions
6.3 Detail Functions Adjust the Replaying Speed Adjust the replaying speed using the slide bar. (Speed: supports 1/8~8X) Pause The replaying images instantly pauses. Replay Click the Replay button and replay the searched recording images. Selection for Playback Search the searched images according to the user. Replay backward direction Fast forward search One screen backward search... - Page 53 Channel This allows you to easily change and switch between the recordings of several cameras. 16 number buttons corresponds with each camera. When you press button number “2”, you can see the recorded images of camera number 2. The user can designate number of the screen while searching 4 Note channels.
- Page 54 To save image by Partial Image Backup, 1. Search recording image to save. 2. Click [Pause] button after searching recorded image. 3. Select Partial Image Backup tap. 4. Select the camera number of the screen to save. 5. Choose a saving method (DSF, MPEG). 6.
-
Page 55: End Viewer
Printing To print the searched screen, 1. Check whether the printer is connected and the power is on. 2. Select the camera number of the image to print. 3. Check the print image in the print preview. 4. Click [Print] button. Or click [Close] button when printing is not required. 5. -
Page 56: Other Setting
Search Next Hour This function is also not available when searching for the first time. [Search Next Hour] function can be used after at least one hour recording has been completed. For example, when a search begins with the criteria of (June 1 , 2003, Tuesday, 13:00:00), the current recording screen displays the image after (June 1 , 2003,... - Page 57 Split Screen Mode Split the current recording screen to display 1,4, 9, 16 cameras simultaneously. When the number of the split screen mode is more than the actual number of cameras connected to the system, the vacant screen displays the logo of the product.
-
Page 58: Other Setting
6.4 Other Setting Setting Password To change the Viewer password, enter the current password followed by a new password. To change the password, 1. Input the current password by using the keyboard icon. 2. Input new password. 3. Check the new password by inputting again. 4. -
Page 59: Search Option
Search Option Select “CD Search”to search backup images on the CD. Only used when the Viewer is started from other computer after CD backup from the NetMaster. Control Volume (Supplied when using Voice Record Option) Control the audio volume while voice replay. Use the slide bar to control the volume. It is possible to use on 1~16 channel mode and to set playback speed and real-time (X1) playback. -
Page 60: Smart Search (Nm-2000Dl Series)
6.5 Smart Search (NM-2000DL Series) How to Use Smart Search 1. Transfer the channel desired to search in the Viewer to 1-channel mode. 2. Press the Smart Search button. 3. The system will require for a password before the Smart Search if the file you searched for contains a password. -
Page 61: Channel Information
Play-back Window The green color represents selected area. You can design searching areas with below buttons to catch up the areas where motion was detected. This playback window is to play recorded images. You can select either “Search All” or “Search Next Movement” to playback record motion pictures. When playback by selecting from search result list, shows the selected categories. - Page 62 Search Start To start, you can select the starting time. When you select the [File Begin] list, it will search for recorded saved file at present regardless the set up time. To view the beginning of an image before searching, set the start time and press [Go to start] button.
- Page 63 Playback Search Result You can playback the required image among the searched result list. Go to Start Position The file will move to the beginning screen of the images, which is being playback. Pause The image being playback will pause for a while. Playback The selected file will playback.
-
Page 64: App (Nm-2000Dl Series)
6.6 APP (NM-2000DL Series) The Basic Method to Use the APP 1. Transfer the channel desired to process in APP in the Viewer to 1-channel mode. 2. [APP] button is activated when moving to previous hour range by pressing [Search Previous Hour] button in the Viewer. 3. - Page 65 APP Screen Layout The screen layout of APP is as shown below. Functions Functions Menu Post-processed Preview File Information Channel-Input Processing Modules Menu File 1. Open File ( ): Used to open up the file. (Deactivated) 2. Close File ( ): Close the file that is open.
- Page 66 Preview The 7 images can be previewed. Search the location with the scroll bar and the pictures will be updated automatically. Click the revisable image among the 7 images. Then, it will appear in [Channel Input] window and [Post-processed] window by 320 x 240.
- Page 67 The filter is applied by the following four categories. 1. Number of frame: The picture quality becomes stable and cleaner by increasing it. But the best effect is shown when the value is lower for brighter environment and higher for darker environment. 2.
- Page 68 Median It is efficient to remove specks/spots or noise in the image. Use the setting value appropriately as the image looks as if it had been drawn with water paint when the setting value is higher. Smooth Convolution It is efficient to eliminate noise. It gives more natural feeling Median. But the disadvantage is that, the image will be hazy when the value is too high.
-
Page 69: Specification
7. SPECIFICATION 7.1 NM-1000 Series NM-1004 NM-1008 Manufacturer’s Standard (AMD Duron Processor) Manufacturer’s Standard Hardware Manufacturer's Standard (Max 3ea, Internal CD-RW + HDD 2ea) Manufacturer's Standard Windows XP Embedded Video Input 4ch Composite Video 8ch Composite Video Voice Input 1ch (Mic. or Line level) Display Speed Max. -
Page 70: Nm-2000Dl Series
7.2 NM-2000DL Series NM-2004DL NM-2008DL NM-2016DL Manufacturer's Standard Manufacturer's Standard Hardware Manufacturer's Standard (Max 3ea, Internal CD-RW + HDD 2ea) Manufacturer's Standard Windows XP Embedded Video Input 16ch Voice Input 1ch (Mic. or Line level) Display Speed (NTSC/PAL) Max 120/100fps 320x240 Max 120/100fps Recording Speed... -
Page 71: Appendix
8. APPENDIX 8.1 Pin Assignment of Alarm Port Refer to the pictures for connecting the pin assignment of alarm port. (NM-1000 Series) Refer to the pictures for connecting the pin assignment of alarm port. (NM-2000DL Series) Alarm In: 4, Alarm Out: 2 <Pin Assignment>... -
Page 72: Tcp/Ip Port Setting Method Using The Firewall
Block Diagram for Alarm Input Block Diagram for Alarm Out 1. Sensor Input: Normal Open (N/O), Normal Close (N/C) 1. Alarm Out: Normal Open (N/O) 2. Line impedance of cables should be less than 20Ω. 2. Maximum should be under DC24V 2A. 8.2 TCP/IP Port Setting Method using the firewall.
Need help?
Do you have a question about the DiSS NetMaster NM-1004 and is the answer not in the manual?
Questions and answers