Tm Tm; Installing Two Crossfirex; Tm -Ready Graphics Cards - ASROCK Fatality H97 Killer series User Manual

TM
2.7 CrossFireX
his motherboard supports CrossFireX
install up to two identical PCI Express x16 graphics cards. Currently CrossFireX
TM
and Quad CrossFireX
/ 8.1 64-bit OS.
1. You should only use identical CrossFireX
certiied.
2. Make sure that your graphics card driver supports AMD CrossFireX
Download the drivers from the AMD's website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certiied PSU. Please
refer to the AMD's website for details.
4. If you pair a 12-pipe CrossFireX
operate as 12-pipe cards while in CrossFireX
5. Diferent CrossFireX
TM
reX . Please refer to AMD graphics card manuals for detailed installation guide.

2.7.1 Installing Two CrossFireX

CrossFire Bridge
and Quad CrossFireX
TM
and Quad CrossFireX
are supported with Windows
TM
Edition card with a 16-pipe card, both cards will
TM
cards may require diferent methods to enable CrossFi-
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE2 slot
and the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (he CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
Fatal1ty H97 Killer Series
TM
Operation Guide
TM
that allows you to
®
7 / 7 64-bit / 8 / 8 64-bit / 8.1
TM
-ready graphics cards that are AMD
TM
TM
mode.
TM
technology.
25