Table of Contents
Advertisement
Press and release the
button, a beep will be heard and the red indicator will flash, meaning a photo is taken.
(If you take photos more than 999 copies, the LCD screen display only 999)
3. Vehicle Mode
When you use it in the car, connect the car charger and switch on the ignition, it will power on and record 1080P
video automatically. It will save a segment for recording every 1 minute, then start to record the next segment of
video. When the storage card is full, the earliest segm
ent of video will be deleted to release the corresponding
space for continuous recording. When the car stalls or you pull out the car charger, it wil
l stop recording and
save the video, will power off in 10s automatically.
Note: You can not open WIFI and do any button operation when in vehicle mode.
4. Enable/disable Wi-Fi
The Wi-Fi is disabled by default. Press the Wi-Fi button on the side of the camera to enable it. When starting
16
Advertisement
Table of Contents
