14. Risk of electric shock. Do not attempt to open the back of the unit. There are no User Serviceable parts inside. A list of User power plug or One Wine System in water or in any other Serviceable parts has been provided in the User Servicing Section liquid.
Page 3
From spacious suburban homes to modern urban lofts, the • Consider spills. Wine System is at home in the kitchen, living room, dining room or bar. Since wine drinkers will gather around the system, consider accidental spills on carpet, furniture or accessories in the area.
Page 4
One Wine System Diagram of Parts After choosing an appropriate location within your home and safely placing the One Wine System, it is time to set up your One Wine System. 1. Before using the One Wine System for the first time, rinse the Bottle Pour Assembly.
Page 5
5. The drip tray attaches to the front bottom of your bottles. (Refer to Care and Cleaning on page Wine System, below the bottom of the chamber door and slides 18 for more information.) underneath the unit and clicks into place. The drip tray protects 5.
Page 6
Figure E 11. Securely supporting the bottom of the wine bottle with your hand, transport the bottle with the Bottle Pour Assembly to your One Wine System. TASTE WINE BEFORE SERVING. 12. Continuing to support the bottle from Always sample a bit of wine...
Page 7
Once oxidation begins, it cannot be stopped but, Types or to a specific temperature of fortunately, it can be slowed! The Wine System removes oxygen from the bottle, slowing the rate of oxidation and keeping your wine your choosing.
Page 8
SETTING THE SETTING THE TEMPERATURE TEMPERATURE 5. SET BY WINE TYPE 7. TURN LIGHT ON or OFF Rotate the Control Knob and press when SET Rotate the Control Knob and press when TURN BY WINE TYPE is displayed. (See Figure D.) LIGHT ON [or OFF] is displayed.
Never open the chamber door while For optimum cooling, thermoelectric products like the pouring wine. Wine System should be in an environment with a room temperature Figure B 6. When you have finished pouring, release the 72°F/22°C or less. A higher room temperature will result in a slightly Pour Button and allow the last drop to flow warmer internal chamber temperature.
SHOOTING SHOOTING TROUBLESHOOTING Problem Recommended Steps Your One Wine System has been carefully designed to give Dispensing/Pouring you many years of trouble-free service. In the unlikely event that your One Wine System does not operate satisfactorily, Wine is not pouring •...
Page 12
• Ensure the Pour Tip is securely in place Note: A wine bottle is securely There are bubbles moving One Wine System is on the Pour Spout. If you have reinstalled installed but preservation from the Bottle Tube into attempting to preserve your wine, but the the Pour Tip, reset the preservation mode is not working.
SECTION USER SERVICEABLE PARTS AND INSTALLATION SERVICE AND MAINTENANCE If your One Wine System requires service, do not return it to User Serviceable Parts the store where you purchased it. All repairs and replacements must be 1. Air Inlet Filter made by an authorized service center.
WARRANTY WARRANTY ONE-YEAR LIMITED WARRANTY JCS shall not be liable for any damages of any kind resulting from the Sunbeam Products, Inc. doing business as Jarden Consumer Solutions purchase, use or misuse of, or inability to use the product including or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a incidental, special, consequential or similar damages or loss of profits, or...
Need help?
Do you have a question about the Wine System and is the answer not in the manual?
Questions and answers
ℍ