Table of Contents
Advertisement
the IR EXT port at the rear to extend the IR sensor range and enable local control
of the matrix.
IR IN/OUT: Super IR control system interface. for further details, please refer
to the Super IR system control introduction.
Part3: HDMI INPUT
Connect to the HDMI input source devices such as a DVD player or a Set-top
Box with HDMI cable.
Part4: OUTPUT
The HDMI OUTPUT connect to HDMI equipped TVs or monitors and the
HDBT OUTPUT connect to the HDBT Receiver. The coaxial and analog audio
output connect to the audio amplifier. The TX and RX for RS232 communication
with the HDBT Receiver TX and RX.
Part5: DC and POE POWER INPUT
Plug the 12V/5A DC power supply into the DC12V and 12V/POE port for matrix
power and HDBT Receiver power in.
6. Remote Control
1. Press this button to power on the matrix or set it to
standby mode.
2.Press these button to select output A,B,C,D for
input 1,2,3,4 port.
7. IR Control system(
Ver1.0 Page 8 of 20
IR Call-back of
Advertisement
Table of Contents
