Do you have a question about the DCX-50 Plus and is the answer not in the manual?
Questions and answers
Summary of Contents for DC Technologies DCX-50 Plus
Page 1
DCX-50 Plus EXTENSION USER MANUAL DC TECHNOLOGIES VOICE +92 42 35879293,94,95 FAX +92 42 35879296...
Page 2
Extension is a line just like you’re outside lines. Only you use it to talk to people within company. Extension Codes Every phone in your DCX-50 plus can be reached through extension and has its own assigned extension codes number. You can dial these codes numbers just as you would dial a telephone number.
Page 3
As you Camp-On, for e.g.302, at getting no reply, whenever the person at 302 finishes its next call, you’ll get a Camp-On ring. As you pick up the receiver, Ext.302 will ring and your contact will be established. Extension Break-In All extension can break into an outgoing call by dialing a ‘6’...
A maximum of 20 hunting groups can be formed. Extension Conference DCX-50 plus gives you the ability to make a conference call. Which means you can be connected to another intercom, along with one outside line (i.e. one trunk line) at the...
Consider, for example, that you are already speaking to an outside line i.e. a trunk line and you want Ext. 303 to call in for conference. You hook flash and dial 303. Trunk line goes on hold and you get connected to 303. You then dial 6 to establish a conference call between yourself, trunk line and 303.
Page 6
Extension Group Classification All extensions in a system can be classified into four groups through class of service programming on the console. The groups are Executive, Secretary, General and Public Address Group. The Executive and the Secretary Group can call all extensions in the office.
½ second. Dial 4, the last dialed number is dialed out. Auto Trunk Redial DCX-50 plus will automatically redial the number on trunks, if that number is busy, without any intervention from the extension user. Note: This activity is operational only if you have dialed the number of a digital exchange.
Page 8
Trunk Hold and Transfer A trunk connected to an extension can be transferred to another extension. Consider, for example, that a trunk 01 connected to your extension 302 is to be transferred to extension 315. You flash the cradle for ½ second, get a tone and trunk 01 goes on hold.
Direct Inward Access DCX-50 plus provides the facility of Direct Inward Access. An outside caller, calling on particular preset lines, will immediately be connected to the system and a MASSAGE will give instructions on how to by pass the operator and get directly connected to the desired extension.
Page 10
You will be connected to the trunk again. If a parked call is not retrieved with in a preset time, it will be transferred to the operator. DC TECHNOLOGIES VOICE +92 42 35879293.94,95 FAX +92 42 35879296...
Need help?
Do you have a question about the DCX-50 Plus and is the answer not in the manual?
Questions and answers