Table of Contents
Advertisement
Quick Links
DRILLING TEMPLATE FOR WALL MOUNTING CAMERA(S) ///
For wall-mounting Camera(s), drill two holes using a 1/4" drill bit and the template below.
Insert supplied wall anchors into holes and secure camera to wall with supplied screws.
ADD-ON CAMERA
FOR USE WITH THE CMS500 WIRELESS CAMERA SYSTEM
DRILL HOLES IN THESE POSITIONS
ET-C500
USER'S GUIDE
Advertisement
Table of Contents
Summary of Contents for Eurotech ET-C500
- Page 1 For wall-mounting Camera(s), drill two holes using a 1/4" drill bit and the template below. Insert supplied wall anchors into holes and secure camera to wall with supplied screws. ADD-ON CAMERA FOR USE WITH THE CMS500 WIRELESS CAMERA SYSTEM DRILL HOLES IN THESE POSITIONS ET-C500 USER’S GUIDE...
-
Page 2: Product Description
PRODUCT DESCRIPTION /// 1. Unpack the Camera. Congratulations on your purchase of the 21ST ™ Wireless Camera (ET-C500). 2. Decide whether the Camera will be wall-mounted or sit on a All 21ST ™ Wireless Cameras includes high quality video and audio components. -
Page 3: Specifications
The 21ST ™ Image Sensor 1/3” CMOS Cameras are sold separately (ET-C500). IMPORTANT: When using more than one Camera, make sure Min. Illumination 0.1 lux each Camera is assigned to a specific channel by adjusting the corresponding DIP switch down.
Need help?
Do you have a question about the ET-C500 and is the answer not in the manual?
Questions and answers