Advertisement
Quick Links
Cover Models: Legacy 105, 105-S, 105-F, 110, 110-S, 110-F
Legacy
110-F
Provided by:
770-532-4743 678-936-1274
770-532-4743 678-936-1274
Legacy Series Installation Manual
Legacy Series Installation Manual
Selecto's "QC" Series
Selecto's "QC" Series
Legacy
105
Legacy
105-F
Legacy
110
Advertisement
Summary of Contents for ezClear Water Legacy 105
- Page 1 Legacy Series Installation Manual Legacy Series Installation Manual Selecto's "QC" Series Selecto's "QC" Series Cover Models: Legacy 105, 105-S, 105-F, 110, 110-S, 110-F Legacy 110-F Legacy Legacy 105-F Provided by: Legacy 770-532-4743 678-936-1274 770-532-4743 678-936-1274...
- Page 2 Installation Precautions Installation Precautions What to know prior to Installation: Selecto water treatment systems are not to be used where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before unit. Do not install where water pressure is outside of 40 - 125 psi, or where temperature is lower than 40 F or exceeds 100 F.
- Page 3 Installation Installation Mounting 1. Measure backplane of filter system and mark Initializing Water Filter hole locations on wall (See Item 1). a. Ensure marks are level, then drills holes 4. Check to see that O-Rings are lightly lubricated. for anchors (if needed). Anchors must be properly Do this by turning the cartridge counter-clockwise 1/8 matched, to allow for wet weight of filter system.
Need help?
Do you have a question about the Legacy 105 and is the answer not in the manual?
Questions and answers