Topex Voxell User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

User's MANUAL

2007

VoIPon

www.voipon.co.uk

sales@voipon.co.uk

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 808299

Table of Contents

Need help?

Do you have a question about the Voxell and is the answer not in the manual?

Questions and answers

Summary of Contents for Topex Voxell

Page 1 User’s MANUAL 2007 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
Page 2 TOPEX is a group of Romanian companies, founded in 1990, by 10 enthusiastic engineers experienced in telecommunications. Its activity is directed to the research, development and production of telecom equipment as well as service for them. TOPEX becomes very quick the most important supplier of IT&C...
Page 3 VOXELL DEAR CLIENT! TOPEX thanks for your choice; with VOXELL equipment you have made an excellent choice. Purchasing the VOXELL equipment you have: Analog interface between a PBX and the 3G mobile network (3G 2100MHZ) Substantial savings at phone billing...
Page 4: Table Of Contents
CONTENTS 1. About VOXELL! 3. VOXELL - INSTALLATION 3.1. Configuring and installing the SIM card 3.2. Connecting the equipment 4. VOXELL - MOUNTING 5. ACHIEVING A VOICE LINK 6. CONFIGURING AN INTERNET CONNECTION 7. MONITORING THE FUNCTION STATUS 8. VOXELL - CONFIGURING 9.
Page 5: About Voxell
Also, for any call made from a mobile phone to the number assigned to SIM card that is comprised by VOXELL connected to a PBX exchange, you can call any local subscriber extension. This will be taxed as a mobile – to – mobile call.
Page 6: Package Content
2. PACKAGE CONTENT VOXELL equipment USB cable for connecting to Flat telephone cable with RJ11 muffle, for connecting to PBX Adapter for power supply 12VDc / 2,08A Antenna with RF connection cable and magnetic base Assembly Kit CD or diskettes with USB and O.A.M drivers...
Page 7: Voxell - Installation
Configuring SIM card VOXELL works with a SIM card that must be activated by GSM/GPRS/3G operator. The SIM card must be configured before it is inserted into the VOXELL slot. For configuring the SIM card use a GSM cellphone. Available configurations: PIN CODE REQUEST –...
Page 8 Inserting the SIM card The SIM card must be inserted into the special slot of VOXELL. The slot of SIM card is located on top right side, under the status LED`s. For inserting or extracting the SIM card use the mobile holder for SIM.
Page 9 VOXELL 2. Pull out the holder (the SIM support)! 3. Insert the SIM card into the holder – the cut (notched) corner must be orientated upwards and the side with contacts toward you TOPEX page. 9 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195...
Page 10 „PIN CODE REQUEST” option enable, VOXELL sends to SIM the code that was stored. If this code is different from the SIM code VOXELL switches into ” mode of waiting for PIN code” from telephone interface. Now you may dial the code from DTMF phone connected to the equipment or using the O.A.M.
Page 11: Connecting The Equipment
PWR – Power, round muffle, JACK type for connecting the power supply adapter (delivery in package). The FME connector is suited for connecting the GSM antenna and superior side on the upper side of the VOXELL equipment! TOPEX page. 11 VoIPon www.voipon.co.uk...
Page 12 PBX exchange. Improper installing the VOXELL equipment might lead to damage of VOXELL or PBX exchange. (If you join a local line of PBX exchange to the FxS connector of VOXELL the both equipment will generate current into the connection cable, in this way VOXELL and PBX exchange may be damage).
Page 13 Connecting the USB cable Connect the USB-B muffle (male) to USB connector (female) of VOXELL, and the other end of cable to the USB-A port of a PC, see the figure 2. Note: The same USB connection has a double function: for data transfer (connecting to Internet) and for VOXELL configuration by means the OAM application.
Page 14 (with great stability) and flat area, even one that is not magnetic. The antenna will be threaded to RF connector available on VOXELL (FME male type). This RF connector is on the top side of equipment, the antenna attachment will be done as is shown in the bellow picture.
Page 15: Voxell - Mounting
VOXELL will be mounted in a place that allows the maximum reception of 3G networks signal. VOXELL can be mounted in a vertical position on a wall or in a horizontal position on a desk or a shelf. VOXELL and its antenna must be positioning at a proper distance for avoiding the interference with others sensitive equipments at radio emissions (PC, monitors.
Page 16 This means placing the VOXELL on a flat surface, that is sure and safety for sustaining the weight of VOXELL and its belongings. A desk, a table or a shelf is suited for mounting VOXELL. For benefit the best performances place the equipment upper in an area without obstacles.
Page 17: Achieving A Voice Link
5.2. Connecting to a PBX trunk or a telephone Use the FxS interface of VOXELL (which must be activated), see the figure 5. Figure 5: Connecting to a trunk of exchange...
Page 18 Outgoing call PBX exchange must be configured to output the calls through VOXELL. The user simply dials the wanted number from an office telephone. PBX exchange processes the number and analyses the prefix and sends it to the outgoing trunk where VOXELL is installed.
Page 19 VOXELL equipment do not offers audibly tone, but takes over and sends the detected digits. VOXELL can be configured thus to modify or to add a prefix to the received figures. Configured in this way VOXELL assures a more efficient routing –...
Page 20 5.4. Achieving test calls It is recommended to make first some test call, for verifying if VOXELL equipment operating correctly. For VOXELL connected to PBX trunk Incoming call Ring, from outside, to the SIM number used by VOXELL. Interface diverts the call and sends the ringing signal to trunk of PBX exchange.
Page 21 5.5. Inserting the PIN or PUK code When you insert the SIM card and it has activated the “PIN Code Request”, at start up VOXELL will send the stored PIN code. If the stored PIN code doesn’t match, the equipment goes in stand-by and waits the new PIN code to be insert from the phone interface.
Page 22 VOXELL is connected, anyone who calls the mobile number of the VOXELL from a public network will get the right to access the out lines of the PBX exchange. To avoid this thing you have 2 possibilities:...
Page 23: Configuring An Internet Connection
Check if the VOXELL equipment is properly connected with the PC and is powered up; First you have to install the USB driver for the VOXELL equipment. This interface can be used for data transfer and also for configuring the equipment (with the OAM application). There is an executable that automatically installs the USB driver.
Page 24 USB driver. Do not let the operating system detect automatically new hardware equipment, install it yourself. For this, insert the floppy disk or CD supplied by Topex into the drive and start the application „PL-2303 Driver Installer.exe”. This is found in the folder called „Driver_usb”.
Page 25 VOXELL Select “Have Disk” > Select the location of the modem driver (it is driver is on the floppy-disk or CD shipped in the VOXELL package,in the folder “Driver_modem”) > Open > OK > Select “Voxell SW (With USB serial conv)” > Next Windows warns you that „This driver is not digitally signed!”, Click...
Page 26 “+” symbol at “Port (COM & LPT)” > Next Then the PC informs you that Microsoft did not check the driver; to insure you about the compatibility with Windows XP („Windows Logo Testing”), select Continue Anyway. Page. 26 TOPEX VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195...
Page 27 VOXELL select Continue Anyway. The installation of the Voxell SW 3G modem has successfully ended and to finish this wizard press Finish. TOPEX page. 27 VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
Page 28 In the above example there is a phone modem on COM3 and the Voxell SW modem on COM4, but the figures for your actual connections may be different. Note: Remember that you have to memorize the name of the VOXELL modem and the port, because you gone use this information when you will perform the Dial-Up connection.
Page 29 > Next > From the list with the modems attached to your computer, select “Modem – VOxell SW (With USB serial conv) (COM 4)” and check if the COM port is the right one > Next >...
Page 30 Next> In the “Phone Number” field, insert “*99***1#” > Next > (The mobile number used must have a specific format, depending on your mobile phone operator). Page. 30 TOPEX VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299...
Page 31 VOXELL In the “User name” field write “internet” > In the “Password” field and respective “Confirm password” field write “operator`s name” > Next > Finish. In this moment you have created an Internet connection, and to finish this wizard press the “Finish” button.
Page 32 (An additional AT command), depending on the mobile phone operator. From “Control Panel” select “Phone and Modem options” and select the again VOXELL modem (in the current example Voxell SW and the COM 4 port respectively). Press on Properties and then the ”Advanced” tab.
Page 33 In the “Extra initialization commands:” window, insert the following command for instance: at+cgdcont=1,“ip”,“internet.operator`s name” or AT+CGDCONT=1,“IP”,“INTERNET_OPERATOR” then confirm all by pressing “OK”. In this moment you have finished to install the Internet connection for the VOXELL equipment. TOPEX page. 33 VoIPon www.voipon.co.uk sales@voipon.co.uk...
Page 34 "Connecting to UMTS" must appear on your screen, which informs you that the equipment is connecting to Internet. Open a browser (such as Internet Explorer) and surf on the Internet! Page. 34 TOPEX VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195...
Page 35: Monitoring The Function Status
VOXELL, and their colors are red, orange and green (as shown in the drawing to the right) Significance of the red LED This LED indicates the operating status of the VOXELL equipment and the existence of a voice connection. STATUS DESCRIPTION...
Page 36 Permanently on It indicates an error, in normal operation the LED or off should always blink! Significance of the green LED” The green LED indicates that Topex equipment is powered (monitors the voltage of +5V cc). STATUS DESCRIPTION Green, light up...
Page 37 VOXELL 7.2. Tonalities VOXELL also signals the function status and the errors by means of some audible tones, which can be heard in the handset of the connected phone. If the control module of the equipment does not communicate with the GSM/GPRS/3G modem or if the mobile phone module has no network signal, VOXELL generates a warning tone.
Page 38: Voxell - Configuring
„Change PIN code”: if this feature is activated, the equipment generates a new PIN code, known only by the user. When VOXELL equipment starts, after the old PIN code is insert the equipment will generate a new code. In this way the user makes sure that the SIM card can be used by others equipments.
Page 39: Technical Specifications
30 mA max. Ring signal 25 Hz, min. 65 V 600 Ω Impedance Dimensions (L x l x H) 222 x 115 x 32 mm Max 500g – VOXELL Weight 1 kg – whole package TOPEX page. 39 VoIPon www.voipon.co.uk sales@voipon.co.uk...
Page 40: Environmental And Operating Conditions
10. ENVIRONMENTAL AND OPERATING CONDITIONS VOXELL equipment must be installed in closed rooms, which follow these environment conditions: Operating temperature 5 to 50 Humidity 10 to 90%, without condense The equipment must not be installed outside! Also VOXELL will not be installed in flammable or explosive environments.
Page 41: Applications
Also, any phone call initialized from a mobile phone to a local subscriber of the PBX will be billed like a mobile-to-mobile call and not like a mobile-to-fix call. To VOXELL you can also connect a PC, through the USB port, offering you a high-speed wireless Internet connection. TOPEX page.
Page 42 Also, for any phone call initiated from a mobile phone to the VOXELL number you can call the fix phone from home. To the VOXELL unit you can also connect a PC, via USB, port for a high-speed connection to the Internet, without any kind of cable connection.
Page 43 By using the VOXELL 3G voice and data interface you have an efficient alternative to the classic wired connections.
Page 44: Glossarry
DTMF codes. The typical application is when you call directly a local subscriber without need for a human operator at the phone exchange. VOXELL makes use of DISA to route the calls, for example allowing a local subscriber to dial (using DTMF codes) a mobile number via VOXELL.
Page 45 TOPEX S.A. We certify hereby that the VOXELL unit is manufactured in concordance with the legal provisions concerning responsibility towards the quality of delivered products, fulfills the quality parameters specified in its “User’s manual”...