Usb Connection; Troubleshooting - TakeMS deejay Manual

3. USB connection

Your PC should find the connected player automatically. When connected properly the display will show the
connection screen. You can now transfer your data by using copy and paste.
When data transfer is finished please use the "remove hardware safely" function.
The player can be used as a removable mass storage device and can store any kinds of data.
When formatting the player with your PC use FAT or FAT32 filesystem only. Formatting will delete all data
stored on the player.

4. Troubleshooting

The player can not be started.
No sound heard from the earphone.
Unrecognizable codes on the display
screen
Poor FM reception
Cannot store files
No file but occupy certain memory
capacity
The player's real capacity is smaller than
the labeled capacity.
Downloaded from ManualMPlayer.com Manuals
Please make sure the player is turned on.
Make sure volume > 0 and earphones are connected properly
Make sure the music file is not corrupted
Make sure you choose the right language
Earphones are used as antenna. Use them at full length
Turn off the electronic devices nearby
Check whether the USB cable is damaged, and secure the
connection between the player and PC.
Check whether the driver is well installed.
Check free disk space
Check if there are hidden files saved in the player.
Format the PC. (File system is FAT)
Because the player's internal software and also FLASH bad block
occupy a little space of the capacity, so the real capacity is
smaller than the labeled capacity.