One-year limited warranty How to install your e-reader into the Solarkindle Lighted Cover? How to charge the Solarkindle Lighted Cover reserve battery and your e-reader at the same time? How to charge the Solarkindle Lighted Cover reserve battery via solar panel?
This is an agreement between you and Solarfocus Technology Co. Ltd. (referred to herein as "we"). Please read this License Agreement and Terms of Use, and the other applicable rules, policies, and terms posted on the www.solarmio.com website (collectively, this "Agreement") before using the Lighted cover. By using the Lighted cover you agree to be bound by the terms of this Agreement.
This limited warranty gives you specific legal rights. To the extent that such rights cannot be disclaimed under applicable law, this limited warranty does not affect such rights. Additional Information You can find the Lighted cover License Agreement, Terms of Use, One-Year Limited Warranty, User's Guide, and other limited warranty and Lighted cover information at www.solarmio.com/sfbc15documents.
How to install your e-reader into the Solarkindle Lighted Cover? Slide your e-reader bottom into the Solarkindle Lighted Cover lower part clamps. Use two hands to push two upper corners of e-reader plastic frame into the Solarkindle Lighted Cover upper clamps. Attention: Push on the e-reader screen is restricted.
How to charge the Solarkindle Lighted Cover reserve battery and your e-reader at the same time? Plug the micro USB end of USB cable in to the Lighted cover micro USB port (which is located at upper part of Solarkindle Lighted cover).
Simply place the Solarkindle Lighted Cover under the sunlight and let the solar panel face to the Sun directly*. The LED indicator will be blink in green. When the LED indicator shows solid green, the Solarkindle Lighted Cover reserve battery is fully charged.
How to switch on the LED reading lamp? Push the LED lamp release button, the LED lamp will pop up and switch on automatically. Note: The LED lamp will not switch on automatically when your e-reader is in the sleeping mode.
How to switch off the LED reading lamp? Push downward from the top side of LED lamp. When you hear the click sound, the LED lamp is off and locked in the slot. Note: The LED lamp will switch off automatically when your e-reader is going into the sleeping mode.
How to transfer the energy from the Solarkindle Lighted Cover reserve battery to your e-reader? Push the Lighted cover power button one time, the LED indicator will display firstly about 5 seconds to indicate the remained energy level of the Lighted cover reserve battery, then the LED will be blinking in red and transfer energy to your e-reader.
How to transfer documents or data to your computer or from your computer to your e-reader? Plug the micro USB end of USB cable in to your e-reader micro USB port (which is located at lower part of Solarkindle Lighted Cover). Plug the USB end (bigger end) of the USB cable in to the computer USB port.
How to remove your e-reader from Solarkindle Lighted Cover? Simply insert a small, thin (2~ 2.5 mm diameter), plastic or non-metallic object into the 4 slots on the side of Lighted cover, and gently release the e-reader.
Page 13
To work around is simply switch on your e-reader and switch it off again that e-reader will shutdown the output signal and going in to sleeping mode. Then the Solarkindle Lighted Cover will delay 20 seconds to switch off LED reading lamp and going in to sleeping mode also.
Cover material: leather-like/leather/leatherette PU (polyurethane) Battery Safety: The rechargeable battery in your Solarkindle Lighted cover device should be replaced only by an authorized service provider. Charge the battery only in temperatures that range from 32° to 95° Fahrenheit (0° to 35° Celsius).
Need help?
Do you have a question about the Solarkindle Lighted Cover and is the answer not in the manual?
Questions and answers