Questions And Answers - Krell Industries Stealth Stereo Preamplifie Owner's Reference Manual

G. QUESTIONS AND ANSWERS
Q. My CD player has both fibre optic and coaxial
outputs. Which one should I use?
A. Given a choice, we prefer the AT&T optical link due
to its ability to completely isolat,e the grounds between
the digital source component anti the Processor. This
minimizes the possibifity of ground loops in the digital
components. The optional AT&T format also has the
added benefit of substantially higher bandwidth than
coax or the standard fibre optic interface..
Q. Will I damage my STEALTH if I leave the power
"ON" all the time?
A. No. The Class"A" discrete analog circuits perform
more consistently once they reach thermal equilibrium.
This processor has been designed to be left on at all , ,
times. The STEALTH draws less than 25 watts out ot tlae
AC mains socket.
NOTE: For the protection of your processor we recom-
mend disconnecting the AC cord from the wall outlet
before any electrical storms or if you plan on being away
from home for prolonged periods of time.
Q. Do I have to switch the Sampling Frequency when I
go between my CD and DAT?
A. No. Your STEALTH automatically senses the input
frequency and does all necessary switching.
Q. I am not ~etting an~v sound through the processor.
What could oe wrong:
A. Most likely there has been a simple mistake in instal-
lation. Check all connections IN and OUT from the
~erOCessor. Check all power connections. Have you se-
cted the correc,t source on your preamp? Check the
front panel LED s forpower supply, stability. If you still
have no sound, turn off the power ~nd contact your
dealer.
9