Remote Control Configuration; Remote Programming; Remote Pairing - Python 424 Owner's Manual

Remote Control Configuration
The remote controls have operations that can be configured to a user's
personal preferences. The following instruction will direct you through
the available configuration and programing options for the remote
control.

Remote Programming

Enter programming, press and hold the
transmit LED turns on to indicate the Main Menu is accessed.
Exit programming or go back to a previous menu, press and release
the button. 1 short and 1 long beep is emitted for each step back.
When programming is exited the transmit LED turns off.

Remote Pairing

Remote pairing is a process where the remote, and the in-vehicle sys-
tem learn the other's encrypted identification, securing communication
between the two from intruders.
The following instruction will step you through the remote pairing op-
eration.
Prepare the vehicle system for pairing:
Turn the key to the ON position.
1.
Within 5 seconds press and release 1 time the Control button on
2.
the Control Center.
Within 5 seconds, press and hold the Control button. The status
3.
LED will flash one time and the horn (if connected) honks once to
confirm the system is ready for remote pairing.
Release the Control button and proceed to next step.
4.
Pairing will exit if:
Step 7 is not completed within 60 seconds
The doors are closed
The ignition is turned off.
14
button for 8 seconds, the
© 2011 Directed Electronics. All rights reserved.