Remote Control Only; Battery Installation And Removal - Krell Industries FBI Owner's Reference Manual

Remote Control Only

See Figure 2 on page 12
Battery
Installation
and
Removal
Notes
Krell FBI
The remote control uses 2 AAA-size 1.5 Volt batteries. Batteries are
included with the shipment. To install the batteries:
1.
Remove the remote control backplate, using the supplied T-10 Torx
wrench.
2.
Install the batteries, following the battery position diagram on the
plastic battery receptacle.
3.
Replace and secure the backplate.
Replace batteries when remote control function becomes intermittent.
Remove batteries if the remote control is not used for a long period of
time. Battery leakage can damage the remote control.
15