1. Manuals
  2. Brands
  3. Bull Manuals
  4. Network Storage Server
  5. 2104 DL1
  6. Operator's manual

Bull 2104 DL1 Operator's Manual

Expandable storage plus
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Bull
2104 Model DL1 Expandable Storage Plus
Operator's Guide
ORDER REFERENCE
86 A1 97KX 00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2104 DL1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bull 2104 DL1

  • Page 1 Bull 2104 Model DL1 Expandable Storage Plus Operator’s Guide ORDER REFERENCE 86 A1 97KX 00...
  • Page 3 Bull 2104 Model DL1 Expandable Storage Plus Operator’s Guide Hardware May 2000 BULL ELECTRONICS ANGERS CEDOC 34 Rue du Nid de Pie – BP 428 49004 ANGERS CEDEX 01 FRANCE ORDER REFERENCE 86 A1 97KX 00...
  • Page 4 The product documented in this manual is Year 2000 Ready. The information in this document is subject to change without notice. Groupe Bull will not be liable for errors contained herein, or for incidental or consequential damages in connection with the use of this material.

  • Page 5: Table Of Contents

    Contents Communications Statements . Federal Communications Commission (FCC) Statement Japanese Voluntary Control Council for Interference (VCCI) Statement. Korean Government Ministry of Communication (MOC) Statement . New Zealand Compliance Statement . International Electrotechnical Commission (IEC) Statement . vi Avis de conformité à la réglementation d’Industrie Canada .
  • Page 6 Exchanging a Fan-and-Power-Supply Assembly . . 43 Before Exchanging a Fan-and-Power-Supply Assembly . . 43 To Exchange a Fan-and-Power-Supply Assembly . . 44 Exchanging a Fan Assembly . . 53 Before Exchanging a Fan Assembly . . 53 To Exchange a Fan Assembly . .

  • Page 7: Communications Statements

    Communications Statements The following statements apply to this product. The statements for other products intended for use with this product appear in their accompanying manuals. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 8: International Electrotechnical Commission (Iec) Statement

    International Electrotechnical Commission (IEC) Statement This product has been designed and built to comply with (IEC) Standard 60950. Avis de conformité à la réglementation d’Industrie Canada Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Industry Canada Compliance Statement This Class A digital apparatus complies with IECS-003.

  • Page 9: Taiwan Class A Compliance Statement

    Nach dem EMVG: “Geräte dürfen an Orten, für die sie nicht ausreichend entstört sind, nur mit besonderer Genehmigung des Bundesministeriums für Post und Telekommunikation oder des Bundesamtes für Post und Telekommunikation betrieben werden. Die Genehmigung wird erteilt, wenn keine elektromagnetischen Störungen zu erwarten sind.”...
  • Page 10 viii 2104 Models DL1 and TL1 Operator’s Guide...

  • Page 11: Safety Notices

    Safety Notices For a translation of the danger and caution notices contained in this book, see “Appendix B. Translated Safety Notices” on page 81. Definitions of Safety Notices A danger notice indicates the presence of a hazard that has the potential of causing death or serious injury.
  • Page 12 2104 Models DL1 and TL1 Operator’s Guide...

  • Page 13: About This Book

    About This Book This book is for people who operate a system that has one or more 2104 Model DL1 or TL1 disk enclosures connected to it. Throughout this book, service representative means a person who has been authorized by your organization to maintain your 2104 disk enclosure. Chapter 1 describes the 2104 Model TL1 and DL1 disk enclosures, their controls, and how to use them.

  • Page 14: Numbering Convention

    Numbering Convention In this book: KB means 1 000 bytes. MB means 1 000 000 bytes. GB means 1 000 000 000 bytes. 2104 Models DL1 and TL1 Operator’s Guide...

  • Page 15: Chapter 1. Using The 2104

    Chapter 1. Using the 2104 Important: The installation of this product is a customer responsibility. Attention: Before continuing with any of the actions described in this book, PLEASE READ THE SAFETY NOTICES NOW. These are in “Appendix B. Translated Safety Notices” on page 81. Attention: When you handle field-replaceable units (FRUs) and other computer parts, take these precautions to avoid static damage:...
  • Page 16 The 2104 Model TL1 and DL1 disk enclosures look like this: Figure 1. 2104 Model TL1 (left) and DL1 (right) 2104 Models DL1 and TL1 Operator’s Guide...

  • Page 17: 2104 Model Dl1

    2104 Model DL1 The 2104 Model DL1 is a rack-mounted SCSI disk enclosure that can be installed into a standard Electrical Industries Association (EIA) 19-inch rack. A fully configured 2104 Model DL1 looks like this: Figure 2. A Fully Configured 2104 Model DL1 viewed from the front (top) and back (bottom) Chapter 1.
  • Page 18 At the front of a 2104 Model DL1 are ten device slots 1 . Each slot must contain either an SCSI disk drive module, or a dummy module. Each disk drive module connects to a backplane which is mounted vertically about halfway between the front and back of the 2104 Model DL1.

  • Page 19: 2104 Model Tl1

    2104 Model TL1 The 2104 Model TL1 is a deskside SCSI disk enclosure. A fully configured 2104 Model TL1 looks like this: Figure 3. A Fully Configured 2104 Model TL1 viewed from the front (left) and back (right) Chapter 1. Using the 2104...
  • Page 20 At the front of a 2104 Model TL1 are ten device slots 1 . Each slot must contain either an SCSI disk drive module, or a dummy module. Each disk drive module connects to a backplane which is mounted vertically about halfway between the front and back of the 2104 Model TL1.

  • Page 21: Controls And Lights

    Controls and Lights This section describes the switches and lights on a 2104 Model DL1 or TL1. The 2104 enclosure has no main power switch. However, each fan-and-power-supply assembly has an On/Standby switch. During normal operations, you do not need to check the lights on 2104 disk enclosures. You can see the 2104 disk enclosure lights at the front of the 2104 disk enclosure.

  • Page 22: Disk Drive Module Lights

    Disk Drive Module Lights The lights on disk drive modules that are installed in a 2104 Model DL1 are visible at the front of the 2104 Model DL1. To see the lights on disk drive modules installed in a 2104 Model TL1, open the front cover: 1.
  • Page 23 Figure 6. Disk Drive Module Lights Each disk drive module has two lights: 1 Activity light The Activity light, which is green, shows the following conditions: The SCSI link to the disk drive is not active. Flashing This disk drive module is active with a command in progress. 2 Check light The Check light, which is amber, shows the following conditions: Normal operating condition...
  • Page 24 Flashing (0.5 seconds on, 0.5 seconds off) The disk drive is part of an array which is in the process of being rebuilt (this is a SAF-TE function). Note: SAF-TE services are not used with RS/6000. 2104 Models DL1 and TL1 Operator’s Guide...

  • Page 25: Lights And Switches On The Fan-And-Power-Supply And Fan Assemblies

    Lights and Switches on the Fan-and-Power-Supply and Fan Assemblies Up to two fan-and-power-supply assemblies 1 are installed in the back of a 2104 Model DL1 or TL1. The power switch and lights are visible at the back of the 2104. Figure 7.
  • Page 26 Figure 8. Fan-and-Power-Supply Assembly Lights and Switch A fan-and-power-supply assembly has the following lights and switch: AC PWR light 1 The AC PWR light, which is green, comes on when the mainline power supply is connected to the fan-and-power-supply assembly. DC PWR light 2 The DC PWR light, which is green, comes on when this fan-and-power-supply assembly is supplying power to the 2104.
  • Page 27 – Or terminator power is active in an external SCSI connection. Figure 9. Fan Assembly A fan assembly has one light: CHK light 1 The CHK light, which is amber, is on when the fan fails. Chapter 1. Using the 2104...

  • Page 28: Lights And Switches On The Scsi Interface Cards

    Lights and Switches on the SCSI Interface Cards Up to two SCSI interface 1 cards can be installed in the back of a 2104. Figure 10. 2104 Model TL1 (left) and 2104 Model DL1(right) Showing the SCSI Interface Cards 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 29 An SCSI interface card has the following lights: Figure 11. SCSI Interface Card Assembly Lights TERM POWER light 1 The TERM POWER light, which is green, is lit when an active SCSI connection is present. LVD/SE light 2 The LVD/SE light indicates the type of host SCSI cable. It is green, and when lit indicates an active Low Voltage Differential (LVD) SCSI connection.

  • Page 30: The Switch Card

    The Switch Card A Switch Card 1 is installed in the back of a 2104 disk enclosure. Figure 12. 2104 Model TL1 (left) and 2104 Model DL1(right) Showing Switch Card 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 31 Figure 13. Switch Card The switch card contains the following switches: Box ID switch 5 This 10-position rotary switch indicates the ID of the IBM Expandable Storage Plus disk enclosure. The operator selects the required setting which can be used by the SES Inquiry command and the SAF-TE buffer 1 command. Note: SAF-TE services are not provided on an RS/6000.
  • Page 32 Switch 3 — Enable Enclosure Services Switch 3 If this switch is on, the enclosure services can operate. If the switch is off, no response occurs to any request to use the enclosure services. If the switch card assembly is not present when the 2104 is first switched on, or when the 2104 receives a ’Reset’...

  • Page 33: Identifying 2104 Disk Enclosures

    Identifying 2104 Disk Enclosures The Box ID switch on the switch card is a 10-position rotary switch that indicates the ID of the 2104 disk enclosure. Its setting is used by the SES Inquiry command or the SAF-TE buffer 1 command. Labels are supplied with the 2104 to enable the operator to identify each 2104 disk enclosure.

  • Page 34: Identifying Disk Drive Modules

    Identifying Disk Drive Modules You can identify a disk drive module by the serial number that appears on a label 1 on the front of the module: nnnnnnnn SCSI X.XGb Figure 14. Disk Drive Module Label This label also shows the size of the disk drive. Each disk drive module also has an SCSI address that is related to its position in the 2104 disk enclosure.

  • Page 35: Security

    Security To protect your disk drives from unauthorized access, a lock 1 is provided on the cover of a 2104 Model TL1. The 2104 Model DL1 has no cover or lock. Cover Locks for the 2104 Model TL1 On the 2104 Model TL1, a lock 1 on the front cover provides physical security for the disk drives.

  • Page 36: Ordering Cover-Lock Keys

    Ordering Cover-Lock Keys Figure 16. Cover-lock Keys For protection against unauthorized key duplication, the cover lock is a high-security lock. Keys (see Figure 16) for these locks are a factory-restricted series and duplicate keys are not available through normal commercial channels. The serial number of the lock is stamped on each key.

  • Page 37: Chapter 2. Adding Disk Drive Modules

    Chapter 2. Adding Disk Drive Modules This chapter describes how to add disk drive modules to a 2104 disk enclosure that is already installed as part of your system. You can do this only if: 1. You are authorized by your organization. 2.

  • Page 38: Before Adding A Disk Drive Module

    Before Adding a Disk Drive Module 1. Identify the slot for the new disk drive module by using the configuration planning information for your system. A dummy disk drive module should be in the slot. Refer to Figure 18. Figure 18. Dummy Disk Drive Module Use the SCSI Device Identification and Removal service aid to set the disk drive slot to Insert.
  • Page 39 2. If you are adding a disk drive module to a 2104 Model TL1, open the front cover of the unit: a. If necessary, unlock the cover using the key provided. b. Grip the right-hand side of the cover and pivot the cover to the left. Figure 19.

  • Page 40: To Add A Disk Drive Module

    To Add a Disk Drive Module The diagrams in the following instructions show a 2104 Model DL1. The steps for adding a disk drive module to a 2104 Model TL1 are the same, but the parts are turned through 90 degrees. 1.
  • Page 41 2. With one hand giving support to the base of the disk drive module and the other hand holding the handle 1 , insert the module and push it into the slot. When the handle touches the front surface of the enclosure, the module stops. Note that the module is not yet fully home.
  • Page 42 3. While continuing to push the disk drive module into the slot, slowly close the handle 1 until it stops with a click. This action pushes the module fully home. Attention: The fans might decrease in speed. Figure 22. Closing the Handle of a Disk Drive Module 4.
  • Page 43 5. If the amber check light 2 comes on, first verify that the new disk drive module has been correctly installed, and then run diagnostics in Problem Determination mode to check the error log. See “Appendix A. Operating with RISC Systems” on page 79. Figure 23.
  • Page 44 6. If you have just added a disk drive module to a 2104 Model TL1, close the cover and, if required, lock it with the key provided. Figure 24. Closing Cover of 2104 Model TL1 7. Add the new disk drive module into your system software configuration, using the system programs.

  • Page 45: Chapter 3. Moving A 2104 Model Dl1 Or Tl1 Safely

    Chapter 3. Moving a 2104 Model DL1 or TL1 Safely Attention: Damage as a result of improper handling might cancel your equipment warranty. Caution: Do not attempt to lift the 2104 by yourself. Ask another person for aid.
  • Page 46 2104 Models DL1 and TL1 Operator’s Guide...

  • Page 47: Chapter 4. Dealing With Problems

    Chapter 4. Dealing with Problems This chapter describes what to do if you have a problem with a 2104 Model DL1 or TL1. It describes how to exchange a faulty disk drive module, a fan-and-power-supply assembly, a fan assembly, an SCSI interface card or a switch card. It also describes what information to provide when you report a problem with a 2104 Model DL1 or TL1, or a device installed in it.

  • Page 48: Exchanging Disk Drive Modules

    Exchanging Disk Drive Modules Sometimes, you can exchange a faulty disk drive module without the assistance of a service representative. You can do this only if: v You are authorized by your organization. v You have the correct disk drive module. Only disk drive modules that have a blue trigger behind a handle 1 that you pull upward to open, can be installed in 2104 disk enclosures.

  • Page 49: Before Exchanging A Disk Drive Module

    Before Exchanging a Disk Drive Module 1. Check the error log; “Appendix A. Operating with RISC Systems” on page 79 describes how to do this if you have a RISC-based system. 2. Find the failing disk drive module by using the location code supplied in the error log.

  • Page 50: To Exchange A Disk Drive Module

    To Exchange a Disk Drive Module 1. If the failing disk drive module is in a 2104 Model TL1, open the front cover of the disk enclosure by: a. If necessary, unlocking the cover, using the key provided. b. Gripping the cover at the right and pivoting it to the left. Figure 26.
  • Page 51 The diagrams in the following instructions show a 2104 Model DL1. The steps for exchanging a disk drive module in a 2104 Model TL1 are the same, but the parts are turned through 90 degrees. 2. Pull upward on the blue trigger 1 and pull outward the handle 2 of the failing disk drive module.
  • Page 52 3. Carefully pull the module out of the 2104 disk enclosure. Support the module with your other hand as you take it from the disk enclosure. Figure 28. Removing a Disk Drive Module Attention:The fan speed might increase. Do not leave the slot empty for more than 30 minutes;...
  • Page 53 4. With one hand giving support to the base of the replacement module and the other hand holding the handle 1 , insert the module and push it into the slot. When the handle touches the front surface of the enclosure, the module stops. Note that the disk drive module is not yet fully home.
  • Page 54 5. While continuing to push the disk drive module into the slot, slowly close the handle 1 until it stops with a click. This action pushes the module fully home. Attention:The fans might decrease their speed. Figure 30. Closing the Handle 6.
  • Page 55 7. If the amber check light 2 comes on, first verify that the new disk drive module has been correctly installed, and then run diagnostics in Problem Determination mode to check the error log. See “Appendix A. Operating with RISC Systems” on page 79. Figure 31.
  • Page 56 8. If you have just exchanged a disk drive module in a 2104 Model TL1, close the cover and, if required, lock it with the key provided. Figure 32. Closing the Cover of a 2104 Model TL1 9. Restore the disk drive module into your system, using the system programs. Refer to “Appendix A.

  • Page 57: Exchanging A Fan-And-Power-Supply Assembly

    Exchanging a Fan-and-Power-Supply Assembly You can exchange a faulty fan-and-power-supply assembly if: v You have a correct spare fan-and-power-supply assembly or fan assembly. v Another fan-and-power-supply assembly is still present in the 2104 disk enclosure. Figure 33. A Fan-and-Power-Supply Assembly You do not need to remove power from the 2104 disk enclosure when exchanging a fan-and-power-supply assembly.

  • Page 58: To Exchange A Fan-And-Power-Supply Assembly

    To Exchange a Fan-and-Power-Supply Assembly Note: The illustrations in the following instructions show a 2104 Model DL1. The steps for exchanging a fan-and-power-supply assembly in a 2104 Model TL1 are the same, but the parts are turned through 90 degrees. 1.
  • Page 59 2. Unplug the mainline power cable from the failing fan-and-power-supply assembly. Figure 35. Unplugging the Mainline Power Cable Caution: Ensure that the mainline power cable has been removed from the failing fan-and-power-supply before continuing. Chapter 4. Dealing with Problems...
  • Page 60 3. Unscrew the two thumbscrews on the fan-and-power-supply assembly. Figure 36. Unscrewing the Thumbscrews on the Fan-and-Power-Supply Assembly 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 61 4. Pull the fan-and-power-supply assembly from the disk enclosure. The speed of the other fan in the 2104 might increase. Figure 37. Removing the Fan-and-Power-Supply Assembly Attention: Do not leave the space empty for more than 30 minutes; if you do, the 2104 disk enclosure, and the disk drive modules, might overheat and be damaged.
  • Page 62 5. Push the replacement fan-and-power-supply assembly fully into the disk enclosure. Figure 38. Inserting a Replacement Fan-and-Power-Supply Assembly DANGER Do not plug the power supply cord into the fan-and-power-supply assembly until the disk enclosure is completely installed and its retaining screws have been tightened.
  • Page 63 6. Tighten the two thumbscrews by turning them clockwise. Figure 39. Tightening the Screws on a Fan-and-Power-Supply Assembly Chapter 4. Dealing with Problems...
  • Page 64 7. Plug the mainline power cable into the new fan-and-power-supply assembly. Figure 40. Plugging in the Mainline Power Cable 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 65 8. Set the DC On/Standby switch 1 on the new fan-and-power-supply assembly to on. Note that the fan speeds might decrease. Figure 41. Fan-and-Power-Supply DC On/Standby Switch Chapter 4. Dealing with Problems...
  • Page 66 9. Verify that the green AC GOOD light 1 comes on immediately and the DC GOOD light 2 shows green within five seconds. If they do not, or the amber CHK light 3 comes on, verify that the new fan-and-power-supply assembly is correctly installed. If it is, report the problem to your service representative.

  • Page 67: Exchanging A Fan Assembly

    Exchanging a Fan Assembly You can exchange a faulty fan assembly if: v You have a correct spare fan assembly. v Another fan-and-power-supply assembly is present in the 2104 Figure 43. Fan Assembly You do not need to remove power from the 2104 disk enclosure when exchanging a fan assembly.

  • Page 68: To Exchange A Fan Assembly

    To Exchange a Fan Assembly The diagrams in the following instructions show a 2104 Model DL1. The steps for exchanging a fan assembly in a 2104 Model TL1 are the same, but the parts are turned through 90 degrees. 1. Verify that the amber CHK light 1 is ON. If the CHK light is not on, do not exchange the fan assembly;...
  • Page 69 2. Unscrew the two thumbscrews. Figure 45. Unscrewing the Thumbscrews on a Fan Assembly Chapter 4. Dealing with Problems...
  • Page 70 3. Pull the fan assembly from the disk enclosure. The speed of the other fan in the 2104 disk enclosure might increase. Figure 46. Pulling out a Fan Assembly Attention: Do not leave the space empty for more than 30 minutes; if you do, the 2104 disk enclosure, and the disk drive modules, might overheat and be damaged.
  • Page 71 4. Push the replacement fan assembly fully into the disk enclosure. Figure 47. Inserting a Fan Assembly Chapter 4. Dealing with Problems...
  • Page 72 5. Tighten the two thumbscrews. Figure 48. Tightening the Thumbscrews 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 73 6. Verify that the amber CHK light 1 is off. You might notice that the speed of the fan in the fan-and-power-supply assembly decreases. Figure 49. Fan Assembly Light Chapter 4. Dealing with Problems...

  • Page 74: Exchanging An Scsi Interface Card Assembly

    Exchanging an SCSI Interface Card Assembly Attention: The SCSI interface card is sensitive to electrostatic discharge (ESD). Use the tools and procedures defined by your organization to protect such parts. You can exchange a faulty SCSI interface card assembly if: v You are authorized by your organization.

  • Page 75: Before Exchanging The Scsi Interface Card Assembly

    Before Exchanging the SCSI Interface Card Assembly Check the lights on the SCSI interface card. If the amber FAULT light 1 is off, do not exchange the SCSI interface card assembly; call your service representative and report the problem. If the FAULT light is on, exchange the SCSI interface card assembly using the procedure in the following section.

  • Page 76: To Exchange An Scsi Interface Card Assembly

    To Exchange an SCSI Interface Card Assembly The diagrams in the following instructions show a 2104 Model DL1. The steps for exchanging a SCSI interface card assembly in a 2104 Model TL1 are the same, but the parts are turned through 90 degrees. 1.
  • Page 77 2. Unscrew the thumbscrew on the failing SCSI interface card. Figure 53. Unscrewing the SCSI Interface Card Chapter 4. Dealing with Problems...
  • Page 78 3. Open the lever fully by moving it to the right. This action unplugs the card assembly from the backplane. Figure 54. Opening the Lever 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 79 4. Pull the SCSI interface card assembly out of the 2104 disk enclosure. Figure 55. Pulling the SCSI Interface Card Out Caution: Do not insert hands or tools into the empty space above the power supply assembly. Chapter 4. Dealing with Problems...
  • Page 80 5. Push the replacement SCSI interface card assembly back into the 2104 disk enclosure. Figure 56. Pushing the Replacement SCSI Interface Card In 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 81 6. Move the lever to the left. Figure 57. Closing the Lever Chapter 4. Dealing with Problems...
  • Page 82 7. Tighten the thumbscrew. Figure 58. Tightening the Thumbscrew 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 83 8. Plug the SCSI connector into the SCSI interface card.. Figure 59. Plugging in the SCSI Cable Chapter 4. Dealing with Problems...
  • Page 84 9. Check that the green TERM POWER light 1 comes on within five seconds. (If it does not, check that the new SCSI interface card has been correctly installed. If it has been correctly installed, and the green TERM POWER light 1 is still off, report the problem to your service representative.) Figure 60.

  • Page 85: Exchanging The Switch Card Assembly

    Exchanging the Switch Card Assembly Attention: The switch card is sensitive to electrostatic discharge (ESD). Use the tools and procedures defined by your organization to protect such parts. You can exchange a faulty switch card assembly if: v You are authorized by your organization. v You have a correct spare switch card assembly.

  • Page 86: To Exchange The Switch Card Assembly

    To Exchange the Switch Card Assembly The diagrams in the following instructions show a 2104 Model DL1. The steps for exchanging the switch card assembly in a 2104 Model TL1 are the same, but the parts are turned through 90 degrees. 1.
  • Page 87 2. Pull the lever up. This action unplugs the switch card assembly from the backplane. Figure 63. Opening the Lever Note: If the 2104 is switched on, it might switch off when you unplug the switch card assembly. Chapter 4. Dealing with Problems...
  • Page 88 3. Pull the switch card assembly out of the 2104 disk enclosure. Figure 64. Remove the Switch Card Caution: Do not insert hands or tools into the empty space between the power supply assemblies. 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 89 4. Push the replacement switch card assembly back into the disk enclosure. Figure 65. Pushing the Switch Card Assembly into the 2104 Chapter 4. Dealing with Problems...
  • Page 90 5. Push the lever down. Figure 66. Closing the Lever 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 91 6. Tighten the thumbscrew. Figure 67. Tightening the Thumbscrew Chapter 4. Dealing with Problems...

  • Page 92: Reporting Problems

    Reporting Problems When you report a problem that has occurred in a 2104 disk enclosure, it is important that you report the following information, in addition to the error information (the SRN) given to you by your operating system: The machine type number 2104 The machine model number DL1 or TL1...

  • Page 93: Appendix A. Operating With Risc Systems

    Appendix A. Operating with RISC Systems This appendix contains information that is specific to IBM Expandable Storage Plus disk enclosures that are attached to RISC systems. SCSI Adapters and Cables An RS/6000 uses one of the following SCSI adapters to connect to the 2104 Model DL1 or 2104 Model TL1: v PCI SCSI-2 Fast/Wide Adapter/A (Feature Code 2415 Type Number 4-7) v PCI SCSI-2 F/W RAID Adapter (Feature Code 2493 Type Number 4-H)

  • Page 94: Problem Determination

    See “Location Codes” in the operator guide for your system for general information about location codes. Problem Determination For some problems, your system diagnostics tell you to check the lights on the system to determine which part, if any, has a fault. “Controls and Lights” on page 7 of this book shows the position of the lights.

  • Page 95: Appendix B. Translated Safety Notices

    Appendix B. Translated Safety Notices This appendix contains the danger and caution notices that are used in the various books related to the Expandable Storage Plus: 2104 Models DL1 and TL1. The notices are shown in English and in various other languages. Danger notice A danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people.
  • Page 96 Caution Notices CAUTION: This unit may have two linecords, to remove all power, disconnect both linecords. CAUTION: This unit weighs 38.5 Kg. CAUTION: The stabilizer must be correctly attached to the bottom front of the rack to prevent the rack from tipping forward while the units are being removed from the rack. Do not pull out or install any unit if the stabilizer is not attached to the rack.
  • Page 97 Traduction des consignes de s curit é é Français Cette annexe contient la traduction des consignes de type Danger et Attention figurant dans les diff rents manuels concernant Expandable é Storage Plus: 2104 Models DL1 and TL1. Consignes de type Danger Les consignes de s curit de type Danger é...
  • Page 98 Consignes Attention ATTENTION: Cette unit é peut poss der deux cordons d'alimentation. é Pour supprimer toutes les tensions dans l'unit , d branchez é é les deux cordons. ATTENTION: Cette unit p se 38.5 kg. é è ATTENTION: Le stabilisateur doit tre solidement ê...
  • Page 99 Sicherheitshinweise Deutsch Dieser Abschnitt enth lt die Sicherheitshinweise VORSICHT und ä ACHTUNG, die in den Ver ffentlichungen zum IBM Expandable Storage ö Plus 2104, Modelle DL1 und TL1 verwendet werden. Hinweis VORSICHT Der Hinweis VORSICHT macht auf eine Gefahr aufmerksam, die t dliche oder schwere ö...
  • Page 100 Hinweise ACHTUNG ACHTUNG: Sollte die Einheit zwei Stromversorgungskabel besitzen, beide Stromversorgungskabel l sen, um die Einheit ganz von der ö Netzspannung zu trennen. ACHTUNG: Diese Einheit wiegt ungef hr 38.5 kg. ä ACHTUNG: Der Stabilisator muß ordnungsgemäß unten an der Vorderseite des Gehäuses angebracht werden, um ein Vorkippen beim Entfernen der Einheiten aus dem Gehäuse zu verhindern.
  • Page 101 Greek Appendix B. Translated Safety Notices...
  • Page 102 CAUTION: DOUBLE POLE / F1 = T10A / 250V NEUTRAL FUSING F2 = T10A / 250V 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 103 Appendix B. Translated Safety Notices...
  • Page 104 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 105 Appendix B. Translated Safety Notices...
  • Page 106 38.5 38.5 CAUTION: DOUBLE POLE / F1 = T10A / 250V NEUTRAL FUSING F2 = T10A / 250V 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 107 Informazioni relativi alla sicurezza Italiano Questo opuscolo contiene la traduzione degli avvisi di pericolo e di attenzione presenti nei manuali relativi all'Expandable Storage Plus: 2104 Modelli DL1 e Tl1. Avviso di pericolo Un avviso di pericolo richiama l'attenzione su una situazione potenzialmente mortale oppure estremamente pericolosa per le persone.
  • Page 108 Avvisi di attenzione ATTENZIONE: Quest'unit pu avere due cavi di alimentazione; per disattivare à ò completamente l'alimentazione, scollegare entrambi i cavi. ATTENZIONE: Questa unit pesa 38.5 KG. à ATTENZIONE: Lo stabilizzatore deve essere correttamente assicurato alla parte frontale, estremit inferiore del rack per evitare che à...
  • Page 109 Appendix B. Translated Safety Notices...
  • Page 110 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 111 Appendix B. Translated Safety Notices...
  • Page 112 38.5 CAUTION: DOUBLE POLE / F1 = T10A / 250V NEUTRAL FUSING F2 = T10A / 250V 2104 Models DL1 and TL1 Operator’s Guide...
  • Page 113 Avisos de Segurança Traduzidos Português Este apêndice contém traduções dos avisos de perigo e cuidado utilizados em diversos manuais relacionados ao produto Expandable Storage Plus: 2104 Modelos DL1 e Tl1. Aviso de perigo Um aviso de perigo adverte sobre uma situação potencialmente letal ou extremamente prejudicial às pessoas.
  • Page 114 Avisos de Cuidado CUIDADO: Esta unidade pode ter dois cabos de alimentação; para desligar toda a energia, desconecte os dois cabos. CUIDADO: Esta unidade pesa 38,5 kg. CUIDADO: O estabilizador deve estar conectado corretamente à parte frontal inferior do rack para evitar que o rack caia para frente quando as unidades estiverem sendo removidas do rack.
  • Page 115 Appendix B. Translated Safety Notices...
  • Page 116 CAUTION: DOUBLE POLE / F1 = T10A / 250V NEUTRAL FUSING F2 = T10A / 250V 2104 Models DL1 and TL1 Operator’s Guide...

  • Page 117: Index

    Index Active light lights SCSI interface card 15 disk drive module 8 Active light, SCSI interface card 15 enclosure check 7 activity light, disk drive module 9 enclosure power 7 fan assembly 11 interface card 14 check light power supply assembly 11 disk drive module 9 Subsystem 7 disk enclosure 7...
  • Page 118 SCSI Cable type SCSI interface card 15 SCSI Interface Card exchanging 60 security 21 Select Enclosure Services switch switch card 18 Select Enclosure Services switch, interface card 18 serial number, machine 78 Subsystem configuration 3, 5 controls 7 lights 7 power control 7 turning power on and off 7 switch...
  • Page 119 SOCIETE / COMPANY : ADRESSE / ADDRESS : Remettez cet imprimé à un responsable BULL ou envoyez-le directement à : Please give this technical publication remark form to your BULL representative or mail to: BULL ELECTRONICS ANGERS CEDOC 34 Rue du Nid de Pie – BP 428...
  • Page 120 Customer Code / Code Client : For Bull Internal Customers / Pour les Clients Internes Bull : Budgetary Section / Section Budgétaire : For Others / Pour les Autres : Please ask your Bull representative. / Merci de demander à votre contact Bull.
  • Page 122 BULL ELECTRONICS ANGERS CEDOC 34 Rue du Nid de Pie – BP 428 49004 ANGERS CEDEX 01 FRANCE ORDER REFERENCE 86 A1 97KX 00...
  • Page 123 Utiliser les marques de découpe pour obtenir les étiquettes. Use the cut marks to get the labels. 2104 Model DL1 Expandable Storage Plus Operator’s Guide 86 A1 97KX 00 2104 Model DL1 Expandable Storage Plus Operator’s Guide 86 A1 97KX 00 2104 Model DL1 Expandable Storage Plus...

This manual is also suitable for:

2104 tl1

Table of Contents