ActionTec ScreenBeam Pro Education Edition 2 User Manual page 55

How can I improve my video/audio performance?
You can try the following methods to improve the ScreenBeam Pro's video/
audio performance:
Place your device closer to ScreenBeam Pro.
s
Connect your device to a wireless network that is using a cleaner wireless
s
channel or change the wireless channel on the current wireless network, and
then connect the device to ScreenBeam Pro.
Turn off the Wi-Fi devices that are not in use currently.
s
What wireless signal range can I expect with ScreenBeam Pro?
ScreenBeam Pro is designed to be used in the same room with the source
device. For best performance, the source device should be placed within 20
meters of ScreenBeam Pro.
Do I need an existing wireless network to use ScreenBeam Pro?
No. ScreenBeam Pro connects directly with the Intel WiDi or Miracast™-
enabled device, and no wireless network is needed. However, the source
device needs to be connected to an Internet router or data network to view
online content.
How can I upgrade ScreenBeam Pro's firmware?
See "Updating the Receiver's Firmware" on page 42 for more information.
How do I configure ScreenBeam Pro's general settings, such as changing
language, rename ScreenBeam Pro, enable/disable screensaver, and idling
time for screensaver?
You can configure ScreenBeam Pro's general settings wirelessly by using
ScreenBeam Pro's web server. See chapter 4, "Advanced Settings, " on page 21,
for more information about configuring ScreenBeam Pro.
Troubleshooting and FAQs
53