Picture Tube Removal - Sony KV-14FV1B Service Manual

2-6. PICTURE TUBE REMOVAL

8Demagnetization
5 NA rotation coil
6 Deflection yoke
0 Four screws
• Removal of anode-cap
NOTE : Short circuit the anode of the picture tube and the
anode cap to the metal chassis, CRT shield or car-
bon paint on the CRT, after removing the anode.
• removing procedures
1 Turn up one side of the
rubber cap in the
direction indicated by
the arrow a.
2 Using a thumb pull up the
rubber cap firmly in the
direction indicated by the
arrow b.
3 When one side of the rubber
cap is separated from the
anode button, the anode-cap
can be removed by turning
up the rubber cap and pulling
it up in the direction of the
arrow c.
4 CV board
(Tapping screw 5)
1 Anode cap
Cushion
a
a
b
7Two DGC clips
9Two spring
!¡ Picture tube
• how to handle an anode-cap
1 Don't hurt the surface of anode-caps with shaped
objects!
2 Don't press the rubber too hard so as not to hurt inside of
anode-caps!
A metal fitting called the shatter-hook terminal is built into
the rebber.
3 Don't turn the foot of rubber over too hard!
The shatter-hook terminal will stick out of damage the
rubber.
b
c
– 18 –
2 Two screws (+BVTP 4 X 16)
3 Chassis assmbly