Table of Contents
Advertisement
Back Panel Description,
BACK PANEL
REMOTE CONNECTIONS,
continued
Notes
POWER
18
continued
36 12 VDC Out and In
The 12 VDC output sends a 12 Volt power on/off signal to other Krell
components via a 12 V cable, as well as to other devices that incor-
porate a 12 V power on/off trigger input. The 12 VDC input receives
12 Volt power on/off signals from other Krell components and devices
that incorporate a 12 V trigger. The 12 VDC out and in connections
let you control the operational and stand-by modes of components
with 12 V triggers allowing whole systems or parts of systems to be
easily coordinated.
When the DVD Standard is in the operational mode, 12 VDC output
provides 12 V of DC output. When the DVD Standard is in the stand-by
mode or off, DC output is 0 V.
12 VDC Out (12 V trigger) current is limited to 30 mA.
Consult the owner's manual of each component used in a custom installa-
tion to take full advantage of the DVD Standard's remote capability.
37 IEC Connector
The DVD Standard is equipped with a standard female IEC power
connector, for use with the AC power cord.
Krell DVD Standard
Advertisement
Table of Contents
