LuminAir Products CL-17 User Manual

Luminair full-time intelli-charger

Advertisement

Quick Links

Full-time Intelligent Charger

User Manual

Please read the entire manual before using this product.
I. Features
1.
Charge all Lithium batteries (3.6V/3.7V & 7.2V/7.4V) for Cameras, Cell phones, Camcorders, PDAs,
iPods (by 5V USB) and AA/AAA Ni-MH rechargeable batteries.
2.
Intelligent Polarity Detection.
3.
Fast/trickle charge and maintain in full charge.
4.
Transfer power from Lithium and AA/AAA batteries via USB output port to any USB rechargeable
devices.
5.
Manual rejuvenating function for over-discharged Lithium and AA/AAA Ni-MH batteries, or batteries
that have not been used for long time.
6.
Five (5) user-friendly, easy-to-read LED charging indicators.
7.
Charge up to 3 different hand-held devices simultaneously.
8.
Built-in safety protections, Over Voltage, Short Circuit and over-time.
II. Contents
Charger main unit
AC Adapter
12V Car Cigarette Adapter
Plastic tube for AAA type battery (2)
III. Important Safety Tips
1. SAVE THIS INSTRUCTION for future operating and safety purposes.
2. Try to void use of extension cord unless absolutely necessary.
3. To reduce the risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
4. Do not use charger in damp/wet locations or directly under the sun.
IV. Parts
(Model No CL-17)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CL-17 and is the answer not in the manual?

Questions and answers

Summary of Contents for LuminAir Products CL-17

  • Page 1: User Manual

    Full-time Intelligent Charger (Model No CL-17) User Manual Please read the entire manual before using this product. I. Features Charge all Lithium batteries (3.6V/3.7V & 7.2V/7.4V) for Cameras, Cell phones, Camcorders, PDAs, iPods (by 5V USB) and AA/AAA Ni-MH rechargeable batteries.
  • Page 2 V. Lithium-ion Battery Charging Mode DO NOT connect the charger with the adapter before (Lithium) battery polarities are detected and Ready LED (13) is lit. 1. Remove the Lithium battery from its device, place it in the tray (18) of the charger. 2.
  • Page 3 4. When the charger is powered by AC or 12V vehicle as power source, it can charge one (1) lithium-ion battery (or 2 AA / AAA Ni-MH batteries) in tray and two (2) hand-held devices via USB output port simultaneously. 5.
  • Page 4 VIIII. USB Port Charging All hand-held devices with tip connectors via USB DC 5V can be charged by this Charger. Connect the device to USB output port (17); the Blue LED (16) will be lit. When the charging is completed, the Blue LED will be off.

Table of Contents