Route-A-Pocket Specifications & Required Tools - White Oak Tools Route-a-pocket User Manual

Allowable Workpiece Thickness
Pocket Width
Pocket Length
Pilot Hole Diameter
Pocket & Pilot Hole Angle
Screw Grip Length
Required Tools:
Plunge Router
For your safety, it is important that you select a good quality and well maintained plunge
router for use with the Route-a-Pocket
make it easy to achieve the quality results you expect. The plunge router must accept a
router bit with a 1/2" shank and should have a plunge stroke of at least 2-3/8". The
maximum suggested plunge router horsepower rating is 2-1/4.
Guide Bushing
The guide bushing must be compatible with your plunge router and have an outside
diameter of 3/4". The collar length should be 1/2" or longer.
Power drill
The power drill used to drive the pocket screws should be equipped with an adjustable
clutch.
www.routeapocket.com
Route-a-Pocket
Route-a-Pocket TM
Minimum: 1/2"
Maximum: 1-1/2"
3/8"
Minimum: 1/2"
Maximum: 4-1/8"
9/64"
10°
Minimum: 7/16"
Maximum: 1-1/8"
TM . Selecting the proper plunge router will also
TM Specifications & Required Tools
Specifications
1