Subscribe to Our Youtube Channel
Related Manuals for KTI Networks KF230TX/3
Summary of Contents for KTI Networks KF230TX/3
-
Page 1: Installation Guide
Installation Guide 10/100 Dual-speed Fast Ethernet PCI Adapters KF230TX/3 DOC.000616-KF230TX/3-K P/N:750-0143-001... - Page 2 United States International...
- Page 3 TRADEMARKS CISPR 22 COMPLIANCE: CE NOTICE...
-
Page 4: Table Of Contents
Table of Contents 1. Introduction 1.1 Adapter Features .............. 1 1.2 Connectors and LEDs ............2 2. Wake on LAN Technology 2.1 Remote Wake-up (RWU) ............ 4 3. Installing the Adapter 3.1 Installing the Adapter ............7 3.2 Installing Wake on LAN Cable ..........8 3.3 Connecting to the Network .......... -
Page 5: Introduction
1. Introduction 1.1 Adapter Features... -
Page 6: Connectors And Leds
1.2 Connectors and LEDs No. Components Description RTL8139C LAN controller 3-Pin Wake on LAN (WOL) connector Remote boot ROM socket Bracket PCI adapter bracket Figure 1-1 Components on the Adapter... -
Page 7: Figure 1-2 Network Connector And Leds
No. Components Description 10/100 Mbps This RJ-45 connector requires UTP network connector cable for 10Mbps or 100 Mbps connection. 100Mb Link LED This LED lights when 100 Mbps connection is selected and active. 10Mb Link LED This LED lights when 10 Mbps connection is selected and active. -
Page 8: Wake On Lan Technology
2. Wake on LAN Technology ACPI (Advanced Configuration and Power Management Interface) 2.1 Remote Wake-up (RWU) Wake-up Packets... - Page 9 WOL Installation...
-
Page 10: Installing The Adapter
3. Installing the Adapter... -
Page 11: Installing The Adapter
3.1 Installing the Adapter Figure 3-1 Inserting the Adapter into the PCI Slot... -
Page 12: Installing Wake On Lan Cable
3.2 Installing Wake on LAN Cable Figure 3-2 Installing WOL Cable... -
Page 13: Connecting To The Network
3.3 Connecting to the Network Figure 3-3 Network Connector... -
Page 14: Figure 3-4 Connecting 10Base-T Cable
10 Mbps Connection Figure 3-4 Connecting 10BASE-T Cable... -
Page 15: Figure 3-5 Connecting 100Base-Tx Cable
100 Mbps Connection Figure 3-5 Connecting 100BASE-TX Cable... -
Page 16: Network Driver Installation
4. Network Driver Installation 4.1 Driver Information... -
Page 17: Bios Setup
4.2 BIOS Setup... -
Page 18: Installation For Windows 98
4.3 Installation for Windows 98 System Figure 4-1 Device Manager... -
Page 19: Figure 4-2 Ping Command
> p i n g 1 2 7 . 0 . 0 . 1 Figure 4-2 Ping Command... -
Page 20: Led Indicators
5. LED Indicators 5.1 Interpretations 100Mb LED On : Good connection between adapter and 100BASE-TX device Off : No active connection Blink: Not applicable 10Mb LED On : Good connection between adapter and 10BASE-T device Off : No active connection Blink : Not applicable Activity LED Blink : Network traffic is present... -
Page 21: Appendix A.1 Specifications
Appendix A1. Specifications... -
Page 22: Connectors & Cable
A2. RJ-45 Connector & Cables Pin Signal Name Figure A-1 RJ-45 Connector Pin Assignments 10Mbps 100 Mbps... -
Page 23: Auto-Negotiation Function
A.3 Auto-negotiation Function 10Mbps or 100Mbps half-duplex or full-duplex An auto-negotiation device A non-auto-negotiation device (such as a hub) -
Page 24: Installing Remote Boot Rom
A.4 Installing Remote Boot ROM...
Need help?
Do you have a question about the KF230TX/3 and is the answer not in the manual?
Questions and answers