Table of Contents
Advertisement
4.4.2 IPCONFIG
IPCONFIG can be used to show your current TCP/IP information, including your address, DNS
server addresses, adapter type and so on.
In the above example ipconfig was entered in the command prompt. The reply back shows the
PC's IP address, Subnet mask and the gateway it is connected to.
Other ipconfig commands will return back more information. The hardware or MAC address of the
computer may be discovered using the command ipconfig /all.
Ipconfig /? will list all of the commands and their usages available for use.
4.4.3 ARP
Displays and modifies the IP-to-Physical address translation tables used by Address Resolution
Protocol (ARP).
Once a remote computer has been pinged, this can be used to see the IP address & MAC address of
the remote computer. It will also show any other devices on the network that it may be connected
to.
71
XYR400E Ethernet Modem
Version 1
5/1/08
Advertisement
Table of Contents
