Quatro DFH-1000 Operation & Maintenance Manual

Quatro DFH-1000 Operation & Maintenance Manual

Ductless fume hood

Advertisement

Quick Links

Operations & Maintenance Manual
DFH-1000
DUCTLESS FUME HOOD
We Make Clean Air
----------------------------------------------------------------
----------------------------------------------------------------
Head Office: 30 Hymus Blvd., Montreal, Quebec, Canada H9R 1C9
Tel.:(514) 630-4444
Fax:(514) 630-4454 www.quatro-air.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DFH-1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Quatro DFH-1000

  • Page 1 Operations & Maintenance Manual DFH-1000 DUCTLESS FUME HOOD We Make Clean Air ---------------------------------------------------------------- ---------------------------------------------------------------- Head Office: 30 Hymus Blvd., Montreal, Quebec, Canada H9R 1C9 Tel.:(514) 630-4444 Fax:(514) 630-4454 www.quatro-air.com...
  • Page 2 (see Note 4 on page 4) (distance from top of DFH to ceiling: 3” minimum). INSTALL BURNOUT OVEN UNDER CENTER OF HOOD. DFH-1000 IS DESIGNED TO OPERATE WITH ONE BURNOUT OVEN. EXHAUSTING TO THE OUTSIDE : DFH can be connected to existing ductwork for venting to outdoors.
  • Page 3 Proper maintenance is critical to extend the life of the filtration system. The information presented below outlines basic maintenance procedures ensuring the DUCTLESS FUME HOOD, DFH-1000 unit will provide trouble-free operation for years to come. The DUCTLESS FUME HOOD, DFH- 1000 is designed to allow quick access to the particulate filters, chemical filters, blower/motor and control panel assembly.
  • Page 4 QUATRO claims no warranty as to merchantability or as to the fitness of the merchandise for any particular use and shall not be liable for any loss or damage. No person, firm or corporation is authorized to assume for QUATRO any other liability in connection with the sale of these goods.
  • Page 5 5- Install Larger Front Section of hood to 2 side sections using screws provided in this piece, then tighten all 8 screws 6- Install filters making sure that the plastic protective wrapping is removed from the carbon trays (F033). 7- Install filter section cover and plug the unit in. We Make Clean Air DFH-1000 ---------------------------------------------------------------------------------------------------------------------...

Table of Contents