Programmes; Washing; Individual Settings; Sorting And Loading Laundry - Bosch washing machine Instruction Manual

Table of Contents

Advertisement

run a wash cycle with no laundry in the machine

Sorting and loading laundry

Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe important information!
Wash laundry of different sizes in the same wash programme.
lose the door. Take care not to trap items of laundry between the washing machine door and
Add detergent and care products
amount of laundry, soiling, water hardness (ask your water supply company) and
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
me selector
Start /
Reload
Before the first wash,
Page 9.
Page 7.
Page 6
seal.
Measure detergent according:
manufacturer's instructions.
1
**If
flashes in the display panel,
the childproof lock is active
Deactivate childproof lock,
page 5.
Additional functions and option
buttons

Individual settings,

page 5.
2
Press
Start/Reload
All buttons are sensitive and need
only to be touched lightly. Press and
hold the
(Ready in) option button
for an automatic run through all
setting options.
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction.

Washing

Detergent drawer with
compartments I, II,
Drum
Control panel
Door
Service door
Washing
3
3
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: turn the programme selector to
Drain
or select the spin speed.
Choose
Start/Reload.
– Remove any foreign objects. Risk of rusting.
– Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models
Refer to Installation instructions.
Switching off
Turn the programme selector to Off.
End of programme when ...
Start/Reload flashes and -
- appears on the display panel.
...
Note: If display panel lighting is switched off, press any button
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
3
– Cool washing: Select
Rinse/Spin .
Start/Reload.
– Press
Programmes at lower temperatures:
– Select
Rinse/Spin
(deactivate Aqua Plus
Drain
.
– Press
Start/Reload.
Changing the programme if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press
Start/Reload. The new programme starts from the beginning.
Reloading laundry if ...
... Press
Start/Reload;
is displayed on the display panel. If
is lit, the washing machine door cannot be opened.
Press
Start/Reload.
Energy
button) or
page 5
4
4

Advertisement

Table of Contents
loading

Table of Contents