Summary of Contents for Vision tools DAH-HDMI1-4-4K2K
- Page 1 User Manual HDMI tool DAH-HDMI 1- 4 - 4K2K 1 x 4 HDMI Splitter with EDID Management...
-
Page 2: Table Of Contents
However, like all electronic equipments, the DAH-HDMI1-4-4K2K should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 3: Introduction
The DAH-HDMI1-4-4K2K Splitter with EDID Management provides the most cost effective and advanced HDMI splitter solution on the market, by which the high definition video and high qua- lity audio can be transmitted to 4 different locations without losing quality. DAH-HDMI1-4-4K2K supports all 3D formats and the true 4K2K video! With built-in RS-232 firmware update mechanism, the compatibility among countless HDMI sources and receivers can be further guaranteed. -
Page 4: Specifications
SPECIFICATIONS Role of usage 1 x 4 Distribution Amplifier (Splitter) HDMI compliance HDMI 1.4a Deep Color, full 3D & 4K2K DVI compliance DVI 1.0 HDCP compliance HDCP 1.3 Video bandwidth Single-link 340MHz [10.2Gbps] Video support Up to 4K2K @30 DTS-HD Master Audio, Dolby TrueHD Dolby Digital, Audio support DTS, DVD-Audio, LPCM, SACD, MPCM [1] Human body model —... -
Page 5: Panel Description
PANEL DESCRIPTION 1. Signal LED: Signal LED indicator 2. Power LED: Lights on when device is ready 3. HDMI IN: Connect to a HDMI input source 4. HDMI OUT1-4: HDMI outputs to HDMI displays [HDMI OUT1: EDID Learn Default] 5. Mini-USB: For technical support only [firmware update] 6. -
Page 6: Hardware Installation
Connect to the receivers. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In. Plug in 5V DC power supply. Power on the HDMI monitors. Power on the HDMI source. CONNECTION DIAGRAM DAH-HDMI1-4-4K2K - 4 -... -
Page 7: Notice
NOTICE While connecting a new monitor to the splitter under mode6(auto EDID) & mode7(EDID lear- ning), experiencing a short period of time without display might be expected. The splitter will do Automatic EDID learning which analyzes the newly connected monitor to see if the EDID for the HDMI input is necessary to update! For firmware update through Mini-USB, users MUST turn the power off, set the dip switch to “ON”, and then connect an Mini-USB cable between PC and device. -
Page 8: Warranty
Under no circumstances will ring theDAH-HDMI1-4-4K2K features and spe- a unit be accepted without a return authorizati- cifications is subject to change without further on number. notice. technologies vision tools technologies gmbh Königsreihe 12-14 22041 Hamburg, Germany - 6 -...